You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
43 lines
1.6 KiB
43 lines
1.6 KiB
12 years ago
|
== Vario Module ==
|
||
|
|
|
||
|
|
- Pressing the "v" (down) button cycles between displays as follows:
|
||
|
|
|
||
|
|
* vario (in m/s)
|
||
|
|
Displays a signed fractional value representing the ascent or
|
||
|
|
descent speed in meters per second.
|
||
|
|
|
||
|
|
* vario (in Pascal)
|
||
|
|
Displays a signed integer value representing the ascent or
|
||
|
|
descent speed in Pascal/second.
|
||
|
|
|
||
|
|
* pressure (in hPa)
|
||
|
|
Displays a signed fraction representing the pressure measured at
|
||
|
|
the current altitude.
|
||
|
|
|
||
|
|
* max Vz (in m/s)
|
||
|
|
Displays the maximum vertical speed in meters/second.
|
||
|
|
|
||
|
|
* min Vz (in m/s)
|
||
|
|
Displays the minimum vertical speed in meters/second.
|
||
|
|
|
||
|
|
- A long press on the "#" button performs a context sensitive function:
|
||
|
|
|
||
|
|
* during vario display, changes the vario sound mode:
|
||
|
|
Off (default, no symbol displayed)
|
||
|
|
Ascent 0 (start beeping at 0.0m/s, beeper1 and beeper2 symbols
|
||
|
|
displayed)
|
||
|
|
Ascent 1 (start beeping at 0.1m/s, beeper1 symbol displayed)
|
||
|
|
Both (beep for up or down, beeper1 and beeper2 symbols
|
||
|
|
displayed)
|
||
|
|
|
||
|
|
Tone frequency, number and duration of beeps depend on climb rate.
|
||
|
|
|
||
|
|
* during max/min Vz display, resets both the max and min values.
|
||
|
|
|
||
|
|
- The "record" icon is flashed at one second intervals, indicating that
|
||
|
|
the watch is in vario mode and receiving pressure measurements.
|
||
|
|
|
||
|
|
Note that the upper line must be in altimeter mode for the vario to
|
||
|
|
work, as it relies on updates from the altimeter. If the altimeter
|
||
|
|
is not active, the vario display shows "noAlt".
|