Browse Source

examples/gnrc_border_router: add commented lines for SLIP

master
kYc0o 6 years ago
parent
commit
4880ea3cc6
  1. 19
      examples/gnrc_border_router/Makefile
  2. 4
      examples/gnrc_border_router/README.md

19
examples/gnrc_border_router/Makefile

@ -29,6 +29,25 @@ CFLAGS += '-DETHOS_UART=UART_DEV(0)' -DETHOS_BAUDRATE=$(ETHOS_BAUDRATE) -DUSE_ET
FEATURES_REQUIRED += periph_uart
endif
# SLIP legacy compatibility
# Uncomment the lines below if you want to use SLIP with this example and don't
# forget to comment the lines above for ethos.
#ifeq (,$(SLIP_UART))
# set default (last available UART)
#SLIP_UART="UART_DEV(UART_NUMOF-1)"
#endif
#ifeq (,$(SLIP_BAUDRATE))
# set default
#SLIP_BAUDRATE=115200
#endif
#GNRC_NETIF_NUMOF := 2
#INCLUDES += -I$(CURDIR)
#CFLAGS += -DSLIP_UART=$(SLIP_UART)
#CFLAGS += -DSLIP_BAUDRATE=$(SLIP_BAUDRATE)
# Include SLIP package for IP over Serial communication
#USEMODULE += gnrc_slip
# Include packages that pull up and auto-init the link layer.
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
USEMODULE += gnrc_netdev_default

4
examples/gnrc_border_router/README.md

@ -181,7 +181,7 @@ example on any RIOT supported platform that offers either more than one UART or
be equipped with an IPv6 capable network device. In this case only the Makefile
of this application has to be slightly modified, e.g. by replacing the line
```
USEMODULE += gnrc_slip
USEMODULE += ethos gnrc_netdev
```
with something like
```
@ -217,7 +217,7 @@ USEMODULE += gnrc_slip
## Configuration
In order to connect a RIOT 6LoWPAN border router over SLIP you run a small
program called tunslip (imported from Contiki) [2] on the Linux host. The
program called tunslip6 (imported from Contiki) [2] on the Linux host. The
program can be found in the `dist/tools/tunslip` folder and has to be compiled
before first use (simple calling `make` should be enough). Now, one can start
the program by calling something like:

Loading…
Cancel
Save