Browse Source

boards/nucleo144-f303: reconfigure PWM and UART to match Arduino pinout

master
Alexandre Abadie 6 years ago
parent
commit
cb4d4fd06c
  1. 48
      boards/nucleo144-f303/include/periph_conf.h

48
boards/nucleo144-f303/include/periph_conf.h

@ -84,28 +84,28 @@ static const uart_conf_t uart_config[] = {
#endif
},
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_C, 5),
.tx_pin = GPIO_PIN(PORT_C, 4),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART2_IRQn,
.bus = APB2,
.irqn = USART1_IRQn,
#ifdef UART_USE_DMA
.dma_stream = 5,
.dma_chan = 4
#endif
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_B, 7),
.tx_pin = GPIO_PIN(PORT_B, 6),
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_D, 6),
.tx_pin = GPIO_PIN(PORT_D, 5),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB2,
.irqn = USART1_IRQn,
.bus = APB1,
.irqn = USART2_IRQn,
#ifdef UART_USE_DMA
.dma_stream = 4,
.dma_chan = 4
@ -115,9 +115,9 @@ static const uart_conf_t uart_config[] = {
#define UART_0_ISR (isr_usart3)
#define UART_0_DMA_ISR (isr_dma1_stream6)
#define UART_1_ISR (isr_usart2)
#define UART_1_ISR (isr_usart1)
#define UART_1_DMA_ISR (isr_dma1_stream5)
#define UART_2_ISR (isr_usart1)
#define UART_2_ISR (isr_usart2)
#define UART_2_DMA_ISR (isr_dma1_stream4)
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
@ -131,12 +131,22 @@ static const pwm_conf_t pwm_config[] = {
{
.dev = TIM1,
.rcc_mask = RCC_APB2ENR_TIM1EN,
.chan = { { .pin = GPIO_PIN(PORT_A, 8), .cc_chan = 0},
{ .pin = GPIO_PIN(PORT_A, 9), .cc_chan = 1},
{ .pin = GPIO_PIN(PORT_A, 10), .cc_chan = 2},
.chan = { { .pin = GPIO_PIN(PORT_E, 9) /* D6 */, .cc_chan = 0},
{ .pin = GPIO_PIN(PORT_E, 11) /* D5 */, .cc_chan = 1},
{ .pin = GPIO_PIN(PORT_E, 13) /* D3 */, .cc_chan = 2},
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
.af = GPIO_AF6,
.af = GPIO_AF2,
.bus = APB2
},
{
.dev = TIM4,
.rcc_mask = RCC_APB1ENR_TIM4EN,
.chan = { { .pin = GPIO_PIN(PORT_D, 15) /* D9 */, .cc_chan = 3},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
.af = GPIO_AF2,
.bus = APB1
}
};
@ -173,7 +183,7 @@ static const spi_conf_t spi_config[] = {
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_PIN(PORT_A, 4),
.cs_pin = GPIO_UNDEF,
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2

Loading…
Cancel
Save