doc: fixed typos and other misspellings

boards/msba2-common/include/msba2_common.h

@@ -12,7 +12,7 @@
  * @brief       Common files for all MSB-A2 based boards
  * @{
  *
- * @files       msba2-common.h
+ * @file
  * @brief       MSB-A2 Common Board Definitions
  *
  * @author      Kaspar Schleiser <kaspar@schleiser.de>

cpu/native/include/nativenet.h

@@ -62,7 +62,7 @@ extern "C" {
 extern const netdev_driver_t nativenet_driver;
 
 /**
- * @brief   Default @netdev API device
+ * @brief   Default @ref netdev API device
  */
 extern netdev_t nativenet_default_dev;
 

cpu/x86/include/x86_videoram.h

@@ -37,7 +37,7 @@ extern "C" {
  *
  * This method can be used before the UART system was initialized.
  *
- * Special charactes that are understood: '\n' and '\r'.
+ * Special charactes that are understood: '\n' and '\\r'.
  * Use DOS newlines.
  */
 void videoram_putc(char c);

drivers/include/netdev/base.h

@@ -60,14 +60,14 @@ typedef enum {
     /**
      * @brief   Radio frame protocol
      *
-     * @detail  Sends frames as defined by radio_packet_t.
+     * @details Sends frames as defined by radio_packet_t.
      */
     NETDEV_PROTO_RADIO          = 0x0001,
 
     /**
      * @brief   IEEE 802.15.4
      *
-     * @detail  Sends frames as defined by ieee802154_frame_t
+     * @details Sends frames as defined by ieee802154_frame_t
      */
     NETDEV_PROTO_802154         = 0x0002,
     NETDEV_PROTO_6LOWPAN        = 0x0003,   /**< 6LoWPAN. */
@@ -85,7 +85,7 @@ typedef enum {
     /**
      * @brief   Communication type for the device as defined by @ref netdev_proto_t
      *
-     * @detail  If a driver does not support the type (but the setting of the
+     * @details If a driver does not support the type (but the setting of the
      *          option is supported) it @ref netdev_driver_t::set_option() shall result
      *          with -EPROTONOSUPPORT.
      *
@@ -113,9 +113,9 @@ typedef enum {
                                          EUI-64 in IEEE 802.15.4) */
 
     /**
-     * @brief   Last value for @netdev_opt_t defined here
+     * @brief   Last value for @ref netdev_opt_t defined here
      *
-     * @detail  Specific devices or modules like @ref netapi that utilize these
+     * @details Specific devices or modules like @ref netapi that utilize these
      *          values to may define higher values, but they must be greater
      *          or equal to @ref NETDEV_OPT_LAST.
      */
@@ -183,7 +183,7 @@ typedef int (*netdev_rcv_data_cb_t)(netdev_t *dev, void *src, size_t src_len,
 /**
  * @brief   Network device API definition.
  *
- * @details  This is a set of functions that must be implemented by any driver
+ * @details This is a set of functions that must be implemented by any driver
  *           for a network device.
  */
 typedef struct {

sys/include/hashes.h

@@ -99,7 +99,7 @@ uint32_t sdbm_hash(const uint8_t *buf, size_t len);
 uint32_t kr_hash(const uint8_t *buf, size_t len);
 
 /**
- * @bief sax_hash
+ * @brief sax_hash
  *
  * Shift, Add, XOR
  *

sys/net/include/net_if.h

@@ -402,7 +402,7 @@ int net_if_get_eui64(net_if_eui64_t *eui64, int if_id, int force_generation);
 
 /**
  * @brief   Parses a string to an EUI-64.
- * @detail  The parsing will be back to front, every non-hexadecimal character
+ * @details The parsing will be back to front, every non-hexadecimal character
  *          and every hexadecimal character beyond the count of 8 will be
  *          ignored
  *

sys/net/include/netapi.h

@@ -128,8 +128,9 @@ typedef enum {
  *          but interpret them **always optimisticly**.
  *
  *          A protocol should at least always answer with an acknowledgement of
- *          result @netapi NETAPI_STATUS_OK if the operation was successfull or
- *          with errno -ENOTSUP if the operation is not supported.
+ *          result @ref netapi NETAPI_STATUS_OK if the operation was
+ *          successfull or with errno -ENOTSUP if the operation is not
+ *          supported.
  */
 typedef enum {
     /**

sys/net/include/pktbuf.h

@@ -37,9 +37,9 @@ extern "C" {
 
 #ifndef PKTBUF_SIZE
 /**
- * @brief Maximum size of the packet buffer.
+ * @brief   Maximum size of the packet buffer.
  *
- * @detail  The rational here is to have at least space for 4 full-MTU IPv6
+ * @details The rational here is to have at least space for 4 full-MTU IPv6
  *          packages (2 incoming, 2 outgoing; 2 * 2 * 1280 B = 5 KiB) +
  *          Meta-Data (roughly estimated to 1 KiB; might be smaller)
  */
@@ -63,7 +63,7 @@ void *pktbuf_alloc(size_t size);
  * @brief   Reallocates new space in the packet buffer, without changing the
  *          content.
  *
- * @datail  If enough memory is available behind it or *size* is smaller than
+ * @details If enough memory is available behind it or *size* is smaller than
  *          the original size the packet will not be moved. Otherwise, it will
  *          be moved. If no space is available nothing happens.
  *
@@ -95,7 +95,7 @@ void *pktbuf_insert(const void *data, size_t size);
 /**
  * @brief   Copies packet data into the packet buffer, safely.
  *
- * @detail  Use this instead of memcpy, since it is thread-safe and checks if
+ * @details Use this instead of memcpy, since it is thread-safe and checks if
  *          *pkt* is
  *
  *          -# in the buffer at all
@@ -118,7 +118,7 @@ int pktbuf_copy(void *pkt, const void *data, size_t data_len);
 /**
  * @brief   Marks the data as being processed.
  *
- * @detail  Internally this increments just a counter on the data.
+ * @details Internally this increments just a counter on the data.
  *          @ref pktbuf_release() decrements it. If the counter is <=0 the
  *          reserved data block in the buffer will be made available again.
  *
@@ -131,7 +131,7 @@ void pktbuf_hold(const void *pkt);
  *
  * @param[in] pkt   The packet you want mark as not being processed anymore.
  *
- * @detail  Internally this decrements just a counter on the data.
+ * @details Internally this decrements just a counter on the data.
  *          @ref pktbuf_hold() increments and any allocation
  *          operation initializes it. If the counter is <=0 the reserved data
  *          block in the buffer will be made available again.

sys/posix/pnet/include/sys/socket.h

@@ -211,7 +211,7 @@ int accept(int socket, struct sockaddr *__restrict address,
 
 /**
  * @brief   Bind a name to a socket.
- * @detail  The bind() function shall assign a local socket address *address*
+ * @details The bind() function shall assign a local socket address *address*
  *          to a socket identified by descriptor socket that has no local
  *          socket address assigned. Sockets created with the socket() function
  *          are initially unnamed; they are identified only by their address
@@ -238,7 +238,7 @@ int bind(int socket, const struct sockaddr *address,
 
 /**
  * @brief   Connect a socket.
- * @detail  The connect() function shall attempt to make a connection on a
+ * @details The connect() function shall attempt to make a connection on a
  *          connection-mode socket or to set or reset the peer address of a
  *          connectionless-mode socket.
  *
@@ -306,7 +306,7 @@ int listen(int socket, int backlog);
 
 /**
  * @brief   Receive a message from a connected socket.
- * @detail  Shall receive a message from a connection-mode or
+ * @details Shall receive a message from a connection-mode or
  *          connectionless-mode socket. It is normally used with connected
  *          sockets because it does not permit the application to retrieve the
  *          source address of received data.
@@ -331,7 +331,7 @@ ssize_t recv(int socket, void *buffer, size_t length, int flags);
 
 /**
  * @brief   Receive a message from a socket.
- * @detail  The recvfrom() function shall receive a message from a
+ * @details The recvfrom() function shall receive a message from a
  *          connection-mode or connectionless-mode socket. It is normally used
  *          with connectionless-mode sockets because it permits the application
  *          to retrieve the source address of received data.
@@ -369,7 +369,7 @@ ssize_t recvfrom(int socket, void *__restrict buffer, size_t length, int flags,
 
 /**
  * @brief   Send a message on a socket.
- * @detail  Shall initiate transmission of a message from the specified socket
+ * @details Shall initiate transmission of a message from the specified socket
  *          to its peer. The send() function shall send a message only when the
  *          socket is connected. If the socket is a connectionless-mode socket,
  *          the message shall be sent to the pre-specified peer address.
@@ -392,7 +392,7 @@ ssize_t send(int socket, const void *buffer, size_t length, int flags);
 
 /**
  * @brief   Send a message on a socket.
- * @detail  Shall send a message through a connection-mode or
+ * @details Shall send a message through a connection-mode or
  *          connectionless-mode socket. If the socket is a connectionless-mode
  *          socket, the message shall be sent to the address specified by
  *          *dest_addr* if no pre-specified peer address has been set. If a
@@ -447,7 +447,7 @@ int setsockopt(int socket, int level, int option_name, const void *option_value,
 
 /**
  * @brief   Create an endpoint for communication.
- * @detail  Shall create an unbound socket in a communications domain, and
+ * @details Shall create an unbound socket in a communications domain, and
  *          return a file descriptor that can be used in later function calls
  *          that operate on sockets.
  *