Browse Source

Merge pull request #5902 from keestux/autonomo-openocd

board/sodaq-autonomo: correct openocd configuration
pr/spi.typo
Alexandre Abadie 6 years ago committed by GitHub
parent
commit
e10fe92027
  1. 39
      boards/sodaq-autonomo/dist/openocd.cfg

39
boards/sodaq-autonomo/dist/openocd.cfg vendored

@ -1 +1,38 @@
source [find board/sodaq_autonomo.cfg]
#
# SODAQ Autonomo
#
# Copyright (c) 2016 SODAQ. All right reserved.
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
#
# To program the Autonomo you need openocd v0.9.0 or higher
# Here is an example bash script:
# #!/bin/bash
# ELF=${1?}
# OPENOCD_CMD="telnet_port disabled; init; halt; at91samd bootloader 0; program {{$ELF}} verify reset; shutdown"
# openocd -d2 -f boards/sodaq-autonomo/dist/openocd.cfg -c "$OPENOCD_CMD"
source [find interface/cmsis-dap.cfg]
# chip name
set CHIPNAME at91samd21j18
set ENDIAN little
# choose a port here
set telnet_port 0
source [find target/at91samdXX.cfg]

Loading…
Cancel
Save