diff --git a/.gitattributes b/.gitattributes index c9839d64f..3c04f4f99 100644 --- a/.gitattributes +++ b/.gitattributes @@ -1 +1,6 @@ *.a binary +# Default conflict marker size is 7 which causes some of the headings in +# release-notes.txt to trigger git diff --check: 'leftover conflict marker' +# when the heading is exactly 7 characters long. +*.md conflict-marker-size=100 +*.txt conflict-marker-size=100 diff --git a/boards/msb-430h/include/periph_conf.h b/boards/msb-430h/include/periph_conf.h index c01b19e60..8f5b8b8fc 100644 --- a/boards/msb-430h/include/periph_conf.h +++ b/boards/msb-430h/include/periph_conf.h @@ -22,4 +22,3 @@ /* make Travis happy: #ifdef __cplusplus extern "C" { #endif */ #endif /* PERIPH_CONF_H */ - diff --git a/boards/msba2-common/tools/flashutil.sh b/boards/msba2-common/tools/flashutil.sh index 3f95d0262..c91c5f186 100755 --- a/boards/msba2-common/tools/flashutil.sh +++ b/boards/msba2-common/tools/flashutil.sh @@ -5,30 +5,30 @@ linux_checkid() { } windows_flash_fm() { - echo "Checking FTDI device on COM${1}" - PORTINFO=`${BASEDIR}/../../../tools/windows/ftdiinfo/bin/Debug/ftdiinfo.exe /l COM${1}` - PORTCHECK=`echo ${PORTINFO} | awk '{ print $1 }'` - BOARDCHECK=`echo ${PORTINFO} | awk '{ print $3 }'` - SERIAL=`echo ${PORTINFO} | awk '{ print $2 }'` - if [ "${PORTCHECK}" != "COM${1}" ]; then - echo " port mismatch / ftdiinfo failed" - exit 1 - fi - if [ "${BOARDCHECK}" != "\"${FTDI_ID}\"" ]; then - echo " target mismatch: target board is \"${FTDI_ID}\", connected is ${BOARDCHECK}" - exit 1 - fi - - echo "Flashing ${HEXFILE} to COM${1} (${BOARDCHECK} serial ${SERIAL})" - # Using FlashMagic on Windows (in separate window) - cmd /C start "FlashMagic ${HEXFILE} to ${BOARDCHECK} on COM${1}" fm.exe "COM(${1}, 230400) DEVICE(LPC2387, 16.000000) HARDWARE(BOOTEXEC, 50, 100) HIGHSPEED(0, 230400) ERASEUSED(${HEXFILE}, PROTECTISP) HEXFILE(${HEXFILE}, NOCHECKSUMS, NOFILL, PROTECTISP) RESET" + echo "Checking FTDI device on COM${1}" + PORTINFO=`${BASEDIR}/../../../tools/windows/ftdiinfo/bin/Debug/ftdiinfo.exe /l COM${1}` + PORTCHECK=`echo ${PORTINFO} | awk '{ print $1 }'` + BOARDCHECK=`echo ${PORTINFO} | awk '{ print $3 }'` + SERIAL=`echo ${PORTINFO} | awk '{ print $2 }'` + if [ "${PORTCHECK}" != "COM${1}" ]; then + echo " port mismatch / ftdiinfo failed" + exit 1 + fi + if [ "${BOARDCHECK}" != "\"${FTDI_ID}\"" ]; then + echo " target mismatch: target board is \"${FTDI_ID}\", connected is ${BOARDCHECK}" + exit 1 + fi + + echo "Flashing ${HEXFILE} to COM${1} (${BOARDCHECK} serial ${SERIAL})" + # Using FlashMagic on Windows (in separate window) + cmd /C start "FlashMagic ${HEXFILE} to ${BOARDCHECK} on COM${1}" fm.exe "COM(${1}, 230400) DEVICE(LPC2387, 16.000000) HARDWARE(BOOTEXEC, 50, 100) HIGHSPEED(0, 230400) ERASEUSED(${HEXFILE}, PROTECTISP) HEXFILE(${HEXFILE}, NOCHECKSUMS, NOFILL, PROTECTISP) RESET" } windows_flash_openocd() { - echo "Flashing ${HEXFILE} through JTAG" - # Using OpenOcd on Windows - #cmd /C start "OpenOCD ${HEXFILE} to ${BOARDCHECK}" - bash -x ${OPENOCD} ${OPENOCD_IF} "mt_flash ${HEXFILE}; reset run; shutdown" + echo "Flashing ${HEXFILE} through JTAG" + # Using OpenOcd on Windows + #cmd /C start "OpenOCD ${HEXFILE} to ${BOARDCHECK}" + bash -x ${OPENOCD} ${OPENOCD_IF} "mt_flash ${HEXFILE}; reset run; shutdown" } TEMP=`getopt -a -o b:i:p:f:: --long basedir:,id:,ports:,file:,openocd:,openocd-if:,xxx:: \ @@ -40,31 +40,31 @@ if [ $? != 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi eval set -- "$TEMP" while true ; do - echo $1: $2 - case "$1" in - -b|--basedir) BASEDIR=$2 ; shift 2 ;; - -i|--id) FTDI_ID=$2; shift 2 ;; - -p|--ports) PORTS=`echo $2 | sed -e 's:,: :g'`; shift 2 ;; - --openocd) OPENOCD=$2; shift 2 ;; - --openocd-if) OPENOCD_IF=$2; shift 2 ;; - - --) HEXFILE=$2 ; shift ; break ;; - *) echo "Internal error!" ; exit 1 ;; - esac + echo $1: $2 + case "$1" in + -b|--basedir) BASEDIR=$2 ; shift 2 ;; + -i|--id) FTDI_ID=$2; shift 2 ;; + -p|--ports) PORTS=`echo $2 | sed -e 's:,: :g'`; shift 2 ;; + --openocd) OPENOCD=$2; shift 2 ;; + --openocd-if) OPENOCD_IF=$2; shift 2 ;; + + --) HEXFILE=$2 ; shift ; break ;; + *) echo "Internal error!" ; exit 1 ;; + esac done if [ "${OS}" = "Windows_NT" ]; then - WINDOWS=1 + WINDOWS=1 fi FLASHUTIL_SHELL=${FLASHUTIL_SHELL:-"xterm -e"} if [ "x${WINDOWS}x" = "xx" ]; then - echo Pausing terminal - ${BASEDIR}/termctrl.sh pause + echo Pausing terminal + ${BASEDIR}/termctrl.sh pause else - HEXFILE=`echo ${HEXFILE} | sed -e 's:/:\\\\:g'` - BASEDIRWIN=`echo ${BASEDIR} | sed -e 's:/:\\\\:g'` + HEXFILE=`echo ${HEXFILE} | sed -e 's:/:\\\\:g'` + BASEDIRWIN=`echo ${BASEDIR} | sed -e 's:/:\\\\:g'` fi pids="" @@ -73,41 +73,41 @@ pids="" # for OpenOCD let the user verify, that the correct board is connected # if [ ${PORTS} = "openocd" ]; then - [ "$OPENOCD" != "" ] || exit 1 - [ "$OPENOCD_IF" != "" ] || exit 1 + [ "$OPENOCD" != "" ] || exit 1 + [ "$OPENOCD_IF" != "" ] || exit 1 # echo -n "Is the board connected to the JTAG a '${FTDI_ID}' (y/n)? " -# read REPLY -# [ "$REPLY" = "y" ] || exit 1 +# read REPLY +# [ "$REPLY" = "y" ] || exit 1 fi # # start a flasher for each port # for PORT in $PORTS; do - if [ "x${WINDOWS}x" != "xx" ]; then - if [ "${PORT}" = "openocd" ]; then - windows_flash_openocd - else - windows_flash_fm ${PORT} - fi - else - if [ "${PORT}" = "openocd" ]; then - ${OPENOCD} ${OPENOCD_IF} "mt_flash ${HEXFILE}; reset run; shutdown" - else - echo Flashing ${HEXFILE} to ${PORT} - # using homemade lpc2k_pgm else - ${FLASHUTIL_SHELL} "${BASEDIR}/bin/lpc2k_pgm ${PORT} ${HEXFILE}; sleep 2" & - pids="${pids} $!" + if [ "x${WINDOWS}x" != "xx" ]; then + if [ "${PORT}" = "openocd" ]; then + windows_flash_openocd + else + windows_flash_fm ${PORT} fi - fi + else + if [ "${PORT}" = "openocd" ]; then + ${OPENOCD} ${OPENOCD_IF} "mt_flash ${HEXFILE}; reset run; shutdown" + else + echo Flashing ${HEXFILE} to ${PORT} + # using homemade lpc2k_pgm else + ${FLASHUTIL_SHELL} "${BASEDIR}/bin/lpc2k_pgm ${PORT} ${HEXFILE}; sleep 2" & + pids="${pids} $!" + fi + fi done ### wait for all flasher processes to finish echo Waiting until all devices have been programmed... for pid in "${pids}"; do - wait ${pid} + wait ${pid} done if [ "x${WINDOWS}x" = "xx" ]; then - echo Resuming terminal - ${BASEDIR}/termctrl.sh continue + echo Resuming terminal + ${BASEDIR}/termctrl.sh continue fi diff --git a/boards/z1/Makefile.dep b/boards/z1/Makefile.dep index 4392a18ad..4e36d0ff5 100644 --- a/boards/z1/Makefile.dep +++ b/boards/z1/Makefile.dep @@ -1,2 +1 @@ USEMODULE += msp430_common - diff --git a/cpu/atmega_common/avr-libc-extra/time.h b/cpu/atmega_common/avr-libc-extra/time.h index 8dc096c38..e1bd2778b 100644 --- a/cpu/atmega_common/avr-libc-extra/time.h +++ b/cpu/atmega_common/avr-libc-extra/time.h @@ -170,7 +170,7 @@ extern "C" { int tm_isdst; }; - + /* We have to provide clock_t / CLOCKS_PER_SEC so that libstdc++-v3 can be built. We define CLOCKS_PER_SEC via a symbol _CLOCKS_PER_SEC_ so that the user can provide the value on the link line, which should diff --git a/cpu/cc2538/cpu.c b/cpu/cc2538/cpu.c index 5a2245f3c..f46d8fbe7 100644 --- a/cpu/cc2538/cpu.c +++ b/cpu/cc2538/cpu.c @@ -94,4 +94,3 @@ static void cpu_clock_init(void) while (!SYS_CTRL->CLOCK_STAbits.SYNC_32K); #endif } - diff --git a/cpu/lpc2387/linkerscript.x b/cpu/lpc2387/linkerscript.x index a87a800f8..472718e6b 100644 --- a/cpu/lpc2387/linkerscript.x +++ b/cpu/lpc2387/linkerscript.x @@ -9,85 +9,85 @@ /* specify the LPC2387 memory areas (see LPC2387 datasheet page 15) */ MEMORY { - flash : ORIGIN = 0, LENGTH = 504K /* FLASH ROM 512kByte without ISP bootloader*/ + flash : ORIGIN = 0, LENGTH = 504K /* FLASH ROM 512kByte without ISP bootloader*/ infomem : ORIGIN = 0x0007D000, LENGTH = 4K /* Last sector in FLASH ROM for config data */ - ram_battery : ORIGIN = 0xE0084000, LENGTH = 2K /* Battery RAM */ - ram : ORIGIN = 0x40000000, LENGTH = 64K /* LOCAL ON-CHIP STATIC RAM */ - ram_usb : ORIGIN = 0x7FD00000, LENGTH = 16K /* USB RAM !!! first 1024 bytes are occupied from GPDMA for MCI */ - ram_ethernet : ORIGIN = 0x7FE00000, LENGTH = 16K /* ethernet RAM */ + ram_battery : ORIGIN = 0xE0084000, LENGTH = 2K /* Battery RAM */ + ram : ORIGIN = 0x40000000, LENGTH = 64K /* LOCAL ON-CHIP STATIC RAM */ + ram_usb : ORIGIN = 0x7FD00000, LENGTH = 16K /* USB RAM !!! first 1024 bytes are occupied from GPDMA for MCI */ + ram_ethernet : ORIGIN = 0x7FE00000, LENGTH = 16K /* ethernet RAM */ } -__stack_und_size = 4; /* stack for "undefined instruction" interrupts */ -__stack_abt_size = 4; /* stack for "abort" interrupts */ -__stack_fiq_size = 64; /* stack for "FIQ" interrupts */ -__stack_irq_size = 400; /* stack for "IRQ" normal interrupts */ -__stack_svc_size = 400; /* stack for "SVC" supervisor mode */ -__stack_usr_size = 4096; /* stack for user operation (kernel init) */ +__stack_und_size = 4; /* stack for "undefined instruction" interrupts */ +__stack_abt_size = 4; /* stack for "abort" interrupts */ +__stack_fiq_size = 64; /* stack for "FIQ" interrupts */ +__stack_irq_size = 400; /* stack for "IRQ" normal interrupts */ +__stack_svc_size = 400; /* stack for "SVC" supervisor mode */ +__stack_usr_size = 4096; /* stack for user operation (kernel init) */ __stack_size = __stack_und_size + __stack_abt_size + __stack_fiq_size + __stack_irq_size + __stack_svc_size + __stack_usr_size; /* now define the output sections */ SECTIONS { - .text : /* collect all sections that should go into FLASH after startup */ - { - KEEP(*(.vectors)) /* Exception Vectors and branch table >= 64 bytes */ - . = ALIGN(64); - KEEP(*(.init)) - KEEP(*(.init0)) /* Start here after reset. */ - KEEP(*(.init1)) - KEEP(*(.init2)) /* Copy data loop */ - KEEP(*(.init3)) - KEEP(*(.init4)) /* Clear bss */ - KEEP(*(.init5)) - KEEP(*(.init6)) /* C++ constructors. */ - KEEP(*(.init7)) - KEEP(*(.init8)) - KEEP(*(.init9)) /* Call main(). */ - *(.text) /* all .text sections (code) */ - *(.text.*) - *(.gnu.linkonce.t.*) - - . = ALIGN(4); - __commands_start = .; - KEEP(*(.commands)) /* command table */ - __commands_end = .; - . = ALIGN(4); - __cfgspec_start = .; - KEEP(*(.cfgspec)) /* configuration spec table */ - __cfgspec_end = .; - . = ALIGN(4); - - __ctors_start = .; - PROVIDE(_os_ctor_start = .); - KEEP(*(.ctors)); - KEEP(*(.init_array)) - PROVIDE(_os_ctor_end = .); - __ctors_end = .; - KEEP(*(.dtors)); - LONG (0); - - - *(.rodata .rodata.*) /* all .rodata sections (constants, strings, etc.) */ - *(.gnu.linkonce.r.*) - *(.glue_7) /* all .glue_7 sections, see https://gcc.gnu.org/ml/gcc-help/2009-03/msg00306.html */ - *(.glue_7t) /* all .glue_7t sections */ - - KEEP(*(.fini9)) - KEEP(*(.fini8)) - KEEP(*(.fini7)) - KEEP(*(.fini6)) /* C++ destructors. */ - KEEP(*(.fini5)) - KEEP(*(.fini4)) - KEEP(*(.fini3)) - KEEP(*(.fini2)) - KEEP(*(.fini1)) - KEEP(*(.fini0)) /* Infinite loop after program termination. */ - KEEP(*(.fini)) - - *(.gcc_except_table) - - } >flash /* put all the above into FLASH */ - . = ALIGN(4); + .text : /* collect all sections that should go into FLASH after startup */ + { + KEEP(*(.vectors)) /* Exception Vectors and branch table >= 64 bytes */ + . = ALIGN(64); + KEEP(*(.init)) + KEEP(*(.init0)) /* Start here after reset. */ + KEEP(*(.init1)) + KEEP(*(.init2)) /* Copy data loop */ + KEEP(*(.init3)) + KEEP(*(.init4)) /* Clear bss */ + KEEP(*(.init5)) + KEEP(*(.init6)) /* C++ constructors. */ + KEEP(*(.init7)) + KEEP(*(.init8)) + KEEP(*(.init9)) /* Call main(). */ + *(.text) /* all .text sections (code) */ + *(.text.*) + *(.gnu.linkonce.t.*) + + . = ALIGN(4); + __commands_start = .; + KEEP(*(.commands)) /* command table */ + __commands_end = .; + . = ALIGN(4); + __cfgspec_start = .; + KEEP(*(.cfgspec)) /* configuration spec table */ + __cfgspec_end = .; + . = ALIGN(4); + + __ctors_start = .; + PROVIDE(_os_ctor_start = .); + KEEP(*(.ctors)); + KEEP(*(.init_array)) + PROVIDE(_os_ctor_end = .); + __ctors_end = .; + KEEP(*(.dtors)); + LONG (0); + + + *(.rodata .rodata.*) /* all .rodata sections (constants, strings, etc.) */ + *(.gnu.linkonce.r.*) + *(.glue_7) /* all .glue_7 sections, see https://gcc.gnu.org/ml/gcc-help/2009-03/msg00306.html */ + *(.glue_7t) /* all .glue_7t sections */ + + KEEP(*(.fini9)) + KEEP(*(.fini8)) + KEEP(*(.fini7)) + KEEP(*(.fini6)) /* C++ destructors. */ + KEEP(*(.fini5)) + KEEP(*(.fini4)) + KEEP(*(.fini3)) + KEEP(*(.fini2)) + KEEP(*(.fini1)) + KEEP(*(.fini0)) /* Infinite loop after program termination. */ + KEEP(*(.fini)) + + *(.gcc_except_table) + + } >flash /* put all the above into FLASH */ + . = ALIGN(4); /* .ARM.exidx is sorted, so has to go in its own output section. */ __exidx_start = .; @@ -97,7 +97,7 @@ SECTIONS } >flash __exidx_end = .; - _etext = . ; /* define a global symbol _etext just after the last code byte */ + _etext = . ; /* define a global symbol _etext just after the last code byte */ .config : { @@ -106,65 +106,65 @@ SECTIONS } >infomem . = ALIGN(4); - /************************************************************************** - * RAM - **************************************************************************/ - - - .ctors (NOLOAD) : - { - . = ALIGN(4096); - start_ctors = .; - *(.init_array); - *(.ctors); - end_ctors = .; - } >ram - - .dtors (NOLOAD) : - { - . = ALIGN(4096); - start_dtors = .; - *(.fini_array); - *(.dtors); - end_dtors = .; - } >ram - - /* - * collect all uninitialized sections that go into RAM - */ - .noinit (NOLOAD) : - { - __noinit_start = .; - PROVIDE(__fiq_handler = .); - *(.fiq) - *(.noinit) - } > ram - . = ALIGN(4); - __noinit_end = .; - - /* - * collect all zero initialized sections that go into RAM - */ - .bss (NOLOAD) : - { - . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ - __bss_start = .; /* define a global symbol marking the start of the .bss section */ - *(.bss*) /* all .bss sections */ - *(COMMON) - } > ram /* put all the above in RAM (it will be cleared in the startup code */ - . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ - __bss_end = . ; /* define a global symbol marking the end of the .bss section */ - - /* - * collect all initialized .data sections that go into RAM - * initial values get placed at the end of .text in flash - */ - .data : AT (_etext) - { - . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ - _data = .; /* create a global symbol marking the start of the .data section */ - *(.data .data.*) /* all .data sections */ - *(.gnu.linkonce.d*) + /************************************************************************** + * RAM + **************************************************************************/ + + + .ctors (NOLOAD) : + { + . = ALIGN(4096); + start_ctors = .; + *(.init_array); + *(.ctors); + end_ctors = .; + } >ram + + .dtors (NOLOAD) : + { + . = ALIGN(4096); + start_dtors = .; + *(.fini_array); + *(.dtors); + end_dtors = .; + } >ram + + /* + * collect all uninitialized sections that go into RAM + */ + .noinit (NOLOAD) : + { + __noinit_start = .; + PROVIDE(__fiq_handler = .); + *(.fiq) + *(.noinit) + } > ram + . = ALIGN(4); + __noinit_end = .; + + /* + * collect all zero initialized sections that go into RAM + */ + .bss (NOLOAD) : + { + . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ + __bss_start = .; /* define a global symbol marking the start of the .bss section */ + *(.bss*) /* all .bss sections */ + *(COMMON) + } > ram /* put all the above in RAM (it will be cleared in the startup code */ + . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ + __bss_end = . ; /* define a global symbol marking the end of the .bss section */ + + /* + * collect all initialized .data sections that go into RAM + * initial values get placed at the end of .text in flash + */ + .data : AT (_etext) + { + . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ + _data = .; /* create a global symbol marking the start of the .data section */ + *(.data .data.*) /* all .data sections */ + *(.gnu.linkonce.d*) . = ALIGN(4); /* preinit data */ PROVIDE_HIDDEN (__preinit_array_start = .); @@ -184,88 +184,88 @@ SECTIONS KEEP(*(SORT(.fini_array.*))) KEEP(*(.fini_array)) PROVIDE_HIDDEN (__fini_array_end = .); - } >ram /* put all the above into RAM (but load the LMA copy into FLASH) */ - . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ - _edata = .; /* define a global symbol marking the end of the .data section */ + } >ram /* put all the above into RAM (but load the LMA copy into FLASH) */ + . = ALIGN(4); /* ensure data is aligned so relocation can use 4-byte operations */ + _edata = .; /* define a global symbol marking the end of the .data section */ - /* - * Exception frames (newer linker versions generate these but they use of - * most of the RAM. - */ - /DISCARD/ : /* discard exception frames */ + /* + * Exception frames (newer linker versions generate these but they use of + * most of the RAM. + */ + /DISCARD/ : /* discard exception frames */ { *(.eh_*) } - /* to enable exception frames */ - /* - .eh_frame : - { - KEEP (*(.eh_frame)) - } > ram - . = ALIGN(4); - */ - - _end = .; /* define a global symbol marking the end of application RAM */ - - __heap1_size = ORIGIN(ram) + LENGTH(ram) - . - __stack_size; - .heap1 (NOLOAD) : - { - PROVIDE(__heap1_start = .); - . = . + __heap1_size; - PROVIDE(__heap1_max = .); - } > ram - - /* - * Stacks - */ - .stack (NOLOAD) : - { - PROVIDE(__stack_start = .); - - . = . + __stack_usr_size; - __stack_usr_start = .; - . = . + __stack_und_size; - __stack_und_start = .; - . = . + __stack_fiq_size; - __stack_fiq_start = .; - . = . + __stack_irq_size; - __stack_irq_start = .; - . = . + __stack_abt_size; - __stack_abt_start = .; - . = . + __stack_svc_size; - __stack_svc_start = .; - - PROVIDE(__stack_end = .); - } > ram - - __heap2_size = LENGTH(ram_ethernet); - .heap2 (NOLOAD) : - { - PROVIDE(__heap2_start = . ); - . = . + __heap2_size; - PROVIDE(__heap2_max = .); /* _heap shall always be < _heap_max */ - } > ram_ethernet - - . = ORIGIN(ram_usb); - .usbdata (NOLOAD) : /* USB RAM section, may be used otherwise if USB is disabled */ - { - *(.usbdata) - } > ram_usb - - .heap3 ALIGN(0x1000) (NOLOAD) : - { - __heap3_size = ORIGIN(ram_usb) + LENGTH(ram_usb) - ABSOLUTE(.); - PROVIDE(__heap3_start = . ); - . += __heap3_size; - PROVIDE(__heap3_max = .); - } > ram_usb - __heap_size = SIZEOF(.heap3); - - - .batteryram (NOLOAD) : /* battery ram stays on during powerdown but needs to be handled specially */ - { - *(.batteryram) - } > ram_battery + /* to enable exception frames */ + /* + .eh_frame : + { + KEEP (*(.eh_frame)) + } > ram + . = ALIGN(4); + */ + + _end = .; /* define a global symbol marking the end of application RAM */ + + __heap1_size = ORIGIN(ram) + LENGTH(ram) - . - __stack_size; + .heap1 (NOLOAD) : + { + PROVIDE(__heap1_start = .); + . = . + __heap1_size; + PROVIDE(__heap1_max = .); + } > ram + + /* + * Stacks + */ + .stack (NOLOAD) : + { + PROVIDE(__stack_start = .); + + . = . + __stack_usr_size; + __stack_usr_start = .; + . = . + __stack_und_size; + __stack_und_start = .; + . = . + __stack_fiq_size; + __stack_fiq_start = .; + . = . + __stack_irq_size; + __stack_irq_start = .; + . = . + __stack_abt_size; + __stack_abt_start = .; + . = . + __stack_svc_size; + __stack_svc_start = .; + + PROVIDE(__stack_end = .); + } > ram + + __heap2_size = LENGTH(ram_ethernet); + .heap2 (NOLOAD) : + { + PROVIDE(__heap2_start = . ); + . = . + __heap2_size; + PROVIDE(__heap2_max = .); /* _heap shall always be < _heap_max */ + } > ram_ethernet + + . = ORIGIN(ram_usb); + .usbdata (NOLOAD) : /* USB RAM section, may be used otherwise if USB is disabled */ + { + *(.usbdata) + } > ram_usb + + .heap3 ALIGN(0x1000) (NOLOAD) : + { + __heap3_size = ORIGIN(ram_usb) + LENGTH(ram_usb) - ABSOLUTE(.); + PROVIDE(__heap3_start = . ); + . += __heap3_size; + PROVIDE(__heap3_max = .); + } > ram_usb + __heap_size = SIZEOF(.heap3); + + + .batteryram (NOLOAD) : /* battery ram stays on during powerdown but needs to be handled specially */ + { + *(.batteryram) + } > ram_battery } diff --git a/cpu/nrf51822/include/nrf51.h b/cpu/nrf51822/include/nrf51.h index ebd6ec056..55fc2ac29 100644 --- a/cpu/nrf51822/include/nrf51.h +++ b/cpu/nrf51822/include/nrf51.h @@ -1,1239 +1,1237 @@ - -/****************************************************************************************************//** - * @file nRF51.h - * - * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for - * nRF51 from Nordic Semiconductor. - * - * @version V522 - * @date 4. March 2014 - * - * @note Generated with SVDConv V2.77p - * from CMSIS SVD File 'nRF51.xml' Version 522, - * - * @par Copyright (c) 2013, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - *******************************************************************************************************/ - - - -/** @addtogroup cpu_specific_Nordic Semiconductor - * @{ - */ - -/** @addtogroup cpu_specific_nRF51 - * @{ - */ - -#ifndef NRF51_H -#define NRF51_H - -#ifdef __cplusplus -extern "C" { -#endif - - -/* ------------------------- Interrupt Number Definition ------------------------ */ - -typedef enum { -/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */ - Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ - NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ - HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ - SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ - DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ - PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ - SysTick_IRQn = -1, /*!< 15 System Tick Timer */ -/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */ - POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */ - RADIO_IRQn = 1, /*!< 1 RADIO */ - UART0_IRQn = 2, /*!< 2 UART0 */ - SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */ - SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */ - GPIOTE_IRQn = 6, /*!< 6 GPIOTE */ - ADC_IRQn = 7, /*!< 7 ADC */ - TIMER0_IRQn = 8, /*!< 8 TIMER0 */ - TIMER1_IRQn = 9, /*!< 9 TIMER1 */ - TIMER2_IRQn = 10, /*!< 10 TIMER2 */ - RTC0_IRQn = 11, /*!< 11 RTC0 */ - TEMP_IRQn = 12, /*!< 12 TEMP */ - RNG_IRQn = 13, /*!< 13 RNG */ - ECB_IRQn = 14, /*!< 14 ECB */ - CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */ - WDT_IRQn = 16, /*!< 16 WDT */ - RTC1_IRQn = 17, /*!< 17 RTC1 */ - QDEC_IRQn = 18, /*!< 18 QDEC */ - LPCOMP_IRQn = 19, /*!< 19 LPCOMP */ - SWI0_IRQn = 20, /*!< 20 SWI0 */ - SWI1_IRQn = 21, /*!< 21 SWI1 */ - SWI2_IRQn = 22, /*!< 22 SWI2 */ - SWI3_IRQn = 23, /*!< 23 SWI3 */ - SWI4_IRQn = 24, /*!< 24 SWI4 */ - SWI5_IRQn = 25 /*!< 25 SWI5 */ -} IRQn_Type; - - -/** @addtogroup Configuration_of_CMSIS - * @{ - */ - - -/* ================================================================================ */ -/* ================ Processor and Core Peripheral Section ================ */ -/* ================================================================================ */ - -/* ----------------Configuration of the cm0 Processor and Core Peripherals---------------- */ -#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */ -#define __MPU_PRESENT 0 /*!< MPU present or not */ -#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -/** @} */ /* End of group Configuration_of_CMSIS */ - -#ifdef __cplusplus -} -#endif - -#include /*!< Cortex-M0 processor and core peripherals */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* ================================================================================ */ -/* ================ Device Specific Peripheral Section ================ */ -/* ================================================================================ */ - - -/** @addtogroup cpu_specific_Device_Peripheral_Registers - * @{ - */ - - -/* ------------------- Start of section using anonymous unions ------------------ */ -#if defined(__CC_ARM) - #pragma push - #pragma anon_unions -#elif defined(__ICCARM__) - #pragma language=extended -#elif defined(__GNUC__) - /* anonymous unions are enabled by default */ -#elif defined(__TMS470__) -/* anonymous unions are enabled by default */ -#elif defined(__TASKING__) - #pragma warning 586 -#else - #warning Not supported compiler type -#endif - - -typedef struct { - __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */ - __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */ - __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */ - __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */ - __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */ - __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */ -} AMLI_RAMPRI_Type; - -typedef struct { - __O uint32_t EN; /*!< Enable channel group. */ - __O uint32_t DIS; /*!< Disable channel group. */ -} PPI_TASKS_CHG_Type; - -typedef struct { - __IO uint32_t EEP; /*!< Channel event end-point. */ - __IO uint32_t TEP; /*!< Channel task end-point. */ -} PPI_CH_Type; - - -/* ================================================================================ */ -/* ================ POWER ================ */ -/* ================================================================================ */ - - -/** - * @brief Power Control. (POWER) - */ - -typedef struct { /*!< POWER Structure */ - __I uint32_t RESERVED0[30]; - __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */ - __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */ - __I uint32_t RESERVED1[34]; - __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __IO uint32_t RESETREAS; /*!< Reset reason. */ - __I uint32_t RESERVED4[9]; - __I uint32_t RAMSTATUS; /*!< Ram status register. */ - __I uint32_t RESERVED5[53]; - __O uint32_t SYSTEMOFF; /*!< System off register. */ - __I uint32_t RESERVED6[3]; - __IO uint32_t POFCON; /*!< Power failure configuration. */ - __I uint32_t RESERVED7[2]; - __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained - register. */ - __I uint32_t RESERVED8; - __IO uint32_t RAMON; /*!< Ram on/off. */ - __I uint32_t RESERVED9[7]; - __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register - is a retained register. */ - __I uint32_t RESERVED10[3]; - __IO uint32_t RAMONB; /*!< Ram on/off. */ - __I uint32_t RESERVED11[8]; - __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */ - __I uint32_t RESERVED12[291]; - __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */ -} NRF_POWER_Type; - - -/* ================================================================================ */ -/* ================ CLOCK ================ */ -/* ================================================================================ */ - - -/** - * @brief Clock control. (CLOCK) - */ - -typedef struct { /*!< CLOCK Structure */ - __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */ - __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */ - __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */ - __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */ - __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */ - __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */ - __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */ - __I uint32_t RESERVED0[57]; - __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */ - __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */ - __I uint32_t RESERVED1; - __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */ - __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */ - __I uint32_t RESERVED2[124]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[63]; - __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */ - __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */ - __I uint32_t RESERVED4; - __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */ - __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */ - __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is - triggered. */ - __I uint32_t RESERVED5[62]; - __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */ - __I uint32_t RESERVED6[7]; - __IO uint32_t CTIV; /*!< Calibration timer interval. */ - __I uint32_t RESERVED7[5]; - __IO uint32_t XTALFREQ; /*!< Crystal frequency. */ -} NRF_CLOCK_Type; - - -/* ================================================================================ */ -/* ================ MPU ================ */ -/* ================================================================================ */ - - -/** - * @brief Memory Protection Unit. (MPU) - */ - -typedef struct { /*!< MPU Structure */ - __I uint32_t RESERVED0[330]; - __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */ - __IO uint32_t RLENR0; /*!< Length of RAM region 0. */ - __I uint32_t RESERVED1[52]; - __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */ - __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */ - __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */ - __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */ - __I uint32_t RESERVED2[255]; - __IO uint32_t ENRBDREG; /*!< Enable or disable RBD. */ -} NRF_MPU_Type; - - -/* ================================================================================ */ -/* ================ PU ================ */ -/* ================================================================================ */ - - -/** - * @brief Patch unit. (PU) - */ - -typedef struct { /*!< PU Structure */ - __I uint32_t RESERVED0[448]; - __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */ - __I uint32_t RESERVED1[24]; - __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */ - __I uint32_t RESERVED2[24]; - __IO uint32_t PATCHEN; /*!< Patch enable register. */ - __IO uint32_t PATCHENSET; /*!< Patch enable register. */ - __IO uint32_t PATCHENCLR; /*!< Patch disable register. */ -} NRF_PU_Type; - - -/* ================================================================================ */ -/* ================ AMLI ================ */ -/* ================================================================================ */ - - -/** - * @brief AHB Multi-Layer Interface. (AMLI) - */ - -typedef struct { /*!< AMLI Structure */ - __I uint32_t RESERVED0[896]; - AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */ -} NRF_AMLI_Type; - - -/* ================================================================================ */ -/* ================ RADIO ================ */ -/* ================================================================================ */ - - -/** - * @brief The radio. (RADIO) - */ - -typedef struct { /*!< RADIO Structure */ - __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */ - __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */ - __O uint32_t TASKS_START; /*!< Start radio. */ - __O uint32_t TASKS_STOP; /*!< Stop radio. */ - __O uint32_t TASKS_DISABLE; /*!< Disable radio. */ - __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */ - __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */ - __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */ - __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */ - __I uint32_t RESERVED0[55]; - __IO uint32_t EVENTS_READY; /*!< Ready event. */ - __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */ - __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */ - __IO uint32_t EVENTS_END; /*!< End event. */ - __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */ - __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */ - __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */ - __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI - sample is ready for readout at the RSSISAMPLE register. */ - __I uint32_t RESERVED1[2]; - __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */ - __I uint32_t RESERVED2[53]; - __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */ - __I uint32_t RESERVED3[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED4[61]; - __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */ - __I uint32_t CD; /*!< Carrier detect. */ - __I uint32_t RXMATCH; /*!< Received address. */ - __I uint32_t RXCRC; /*!< Received CRC. */ - __I uint32_t DAI; /*!< Device address match index. */ - __I uint32_t RESERVED5[60]; - __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */ - __IO uint32_t FREQUENCY; /*!< Frequency. */ - __IO uint32_t TXPOWER; /*!< Output power. */ - __IO uint32_t MODE; /*!< Data rate and modulation. */ - __IO uint32_t PCNF0; /*!< Packet configuration 0. */ - __IO uint32_t PCNF1; /*!< Packet configuration 1. */ - __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */ - __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */ - __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */ - __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */ - __IO uint32_t TXADDRESS; /*!< Transmit address select. */ - __IO uint32_t RXADDRESSES; /*!< Receive address select. */ - __IO uint32_t CRCCNF; /*!< CRC configuration. */ - __IO uint32_t CRCPOLY; /*!< CRC polynomial. */ - __IO uint32_t CRCINIT; /*!< CRC initial value. */ - __IO uint32_t TEST; /*!< Test features enable register. */ - __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */ - __I uint32_t RSSISAMPLE; /*!< RSSI sample. */ - __I uint32_t RESERVED6; - __I uint32_t STATE; /*!< Current radio state. */ - __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */ - __I uint32_t RESERVED7[2]; - __IO uint32_t BCC; /*!< Bit counter compare. */ - __I uint32_t RESERVED8[39]; - __IO uint32_t DAB[8]; /*!< Device address base segment. */ - __IO uint32_t DAP[8]; /*!< Device address prefix. */ - __IO uint32_t DACNF; /*!< Device address match configuration. */ - __I uint32_t RESERVED9[56]; - __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */ - __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */ - __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */ - __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */ - __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */ - __I uint32_t RESERVED10[561]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RADIO_Type; - - -/* ================================================================================ */ -/* ================ UART ================ */ -/* ================================================================================ */ - - -/** - * @brief Universal Asynchronous Receiver/Transmitter. (UART) - */ - -typedef struct { /*!< UART Structure */ - __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */ - __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */ - __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */ - __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */ - __I uint32_t RESERVED0[3]; - __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */ - __I uint32_t RESERVED1[56]; - __IO uint32_t EVENTS_CTS; /*!< CTS activated. */ - __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */ - __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */ - __I uint32_t RESERVED2[4]; - __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */ - __I uint32_t RESERVED3; - __IO uint32_t EVENTS_ERROR; /*!< Error detected. */ - __I uint32_t RESERVED4[7]; - __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ - __I uint32_t RESERVED5[46]; - __IO uint32_t SHORTS; /*!< Shortcuts for UART. */ - __I uint32_t RESERVED6[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED7[93]; - __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */ - __I uint32_t RESERVED8[31]; - __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */ - __I uint32_t RESERVED9; - __IO uint32_t PSELRTS; /*!< Pin select for RTS. */ - __IO uint32_t PSELTXD; /*!< Pin select for TXD. */ - __IO uint32_t PSELCTS; /*!< Pin select for CTS. */ - __IO uint32_t PSELRXD; /*!< Pin select for RXD. */ - __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced. - Once read the character is consummed. If read when no character - available, the UART will stop working. */ - __O uint32_t TXD; /*!< TXD register. */ - __I uint32_t RESERVED10; - __IO uint32_t BAUDRATE; /*!< UART Baudrate. */ - __I uint32_t RESERVED11[17]; - __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */ - __I uint32_t RESERVED12[675]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_UART_Type; - - -/* ================================================================================ */ -/* ================ SPI ================ */ -/* ================================================================================ */ - - -/** - * @brief SPI master 0. (SPI) - */ - -typedef struct { /*!< SPI Structure */ - __I uint32_t RESERVED0[66]; - __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */ - __I uint32_t RESERVED1[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[125]; - __IO uint32_t ENABLE; /*!< Enable SPI. */ - __I uint32_t RESERVED3; - __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ - __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ - __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ - __I uint32_t RESERVED4; - __I uint32_t RXD; /*!< RX data. */ - __IO uint32_t TXD; /*!< TX data. */ - __I uint32_t RESERVED5; - __IO uint32_t FREQUENCY; /*!< SPI frequency */ - __I uint32_t RESERVED6[11]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED7[681]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_SPI_Type; - - -/* ================================================================================ */ -/* ================ TWI ================ */ -/* ================================================================================ */ - - -/** - * @brief Two-wire interface master 0. (TWI) - */ - -typedef struct { /*!< TWI Structure */ - __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */ - __I uint32_t RESERVED0; - __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */ - __I uint32_t RESERVED1[2]; - __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */ - __I uint32_t RESERVED2; - __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */ - __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */ - __I uint32_t RESERVED3[56]; - __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */ - __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */ - __I uint32_t RESERVED4[4]; - __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */ - __I uint32_t RESERVED5; - __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */ - __I uint32_t RESERVED6[4]; - __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */ - __I uint32_t RESERVED7[3]; - __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */ - __I uint32_t RESERVED8[45]; - __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED9[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED10[110]; - __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */ - __I uint32_t RESERVED11[14]; - __IO uint32_t ENABLE; /*!< Enable two-wire master. */ - __I uint32_t RESERVED12; - __IO uint32_t PSELSCL; /*!< Pin select for SCL. */ - __IO uint32_t PSELSDA; /*!< Pin select for SDA. */ - __I uint32_t RESERVED13[2]; - __I uint32_t RXD; /*!< RX data register. */ - __IO uint32_t TXD; /*!< TX data register. */ - __I uint32_t RESERVED14; - __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */ - __I uint32_t RESERVED15[24]; - __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */ - __I uint32_t RESERVED16[668]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TWI_Type; - - -/* ================================================================================ */ -/* ================ SPIS ================ */ -/* ================================================================================ */ - - -/** - * @brief SPI slave 1. (SPIS) - */ - -typedef struct { /*!< SPIS Structure */ - __I uint32_t RESERVED0[9]; - __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */ - __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */ - __I uint32_t RESERVED1[54]; - __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */ - __I uint32_t RESERVED2[8]; - __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */ - __I uint32_t RESERVED3[53]; - __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */ - __I uint32_t RESERVED4[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED5[61]; - __I uint32_t SEMSTAT; /*!< Semaphore status. */ - __I uint32_t RESERVED6[15]; - __IO uint32_t STATUS; /*!< Status from last transaction. */ - __I uint32_t RESERVED7[47]; - __IO uint32_t ENABLE; /*!< Enable SPIS. */ - __I uint32_t RESERVED8; - __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ - __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ - __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ - __IO uint32_t PSELCSN; /*!< Pin select for CSN. */ - __I uint32_t RESERVED9[7]; - __IO uint32_t RXDPTR; /*!< RX data pointer. */ - __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */ - __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */ - __I uint32_t RESERVED10; - __IO uint32_t TXDPTR; /*!< TX data pointer. */ - __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */ - __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */ - __I uint32_t RESERVED11; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED12; - __IO uint32_t DEF; /*!< Default character. */ - __I uint32_t RESERVED13[24]; - __IO uint32_t ORC; /*!< Over-read character. */ - __I uint32_t RESERVED14[654]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_SPIS_Type; - - -/* ================================================================================ */ -/* ================ GPIOTE ================ */ -/* ================================================================================ */ - - -/** - * @brief GPIO tasks and events. (GPIOTE) - */ - -typedef struct { /*!< GPIOTE Structure */ - __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */ - __I uint32_t RESERVED0[60]; - __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */ - __I uint32_t RESERVED1[27]; - __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */ - __I uint32_t RESERVED2[97]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[129]; - __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */ - __I uint32_t RESERVED4[695]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_GPIOTE_Type; - - -/* ================================================================================ */ -/* ================ ADC ================ */ -/* ================================================================================ */ - - -/** - * @brief Analog to digital converter. (ADC) - */ - -typedef struct { /*!< ADC Structure */ - __O uint32_t TASKS_START; /*!< Start an ADC conversion. */ - __O uint32_t TASKS_STOP; /*!< Stop ADC. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[61]; - __I uint32_t BUSY; /*!< ADC busy register. */ - __I uint32_t RESERVED3[63]; - __IO uint32_t ENABLE; /*!< ADC enable. */ - __IO uint32_t CONFIG; /*!< ADC configuration register. */ - __I uint32_t RESULT; /*!< Result of ADC conversion. */ - __I uint32_t RESERVED4[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_ADC_Type; - - -/* ================================================================================ */ -/* ================ TIMER ================ */ -/* ================================================================================ */ - - -/** - * @brief Timer 0. (TIMER) - */ - -typedef struct { /*!< TIMER Structure */ - __O uint32_t TASKS_START; /*!< Start Timer. */ - __O uint32_t TASKS_STOP; /*!< Stop Timer. */ - __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */ - __O uint32_t TASKS_CLEAR; /*!< Clear timer. */ - __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */ - __I uint32_t RESERVED0[11]; - __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */ - __I uint32_t RESERVED1[60]; - __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ - __I uint32_t RESERVED2[44]; - __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */ - __I uint32_t RESERVED3[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED4[126]; - __IO uint32_t MODE; /*!< Timer Mode selection. */ - __IO uint32_t BITMODE; /*!< Sets timer behaviour. */ - __I uint32_t RESERVED5; - __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source - clock frequency is divided by 2^SCALE. */ - __I uint32_t RESERVED6[11]; - __IO uint32_t CC[4]; /*!< Capture/compare registers. */ - __I uint32_t RESERVED7[683]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TIMER_Type; - - -/* ================================================================================ */ -/* ================ RTC ================ */ -/* ================================================================================ */ - - -/** - * @brief Real time counter 0. (RTC) - */ - -typedef struct { /*!< RTC Structure */ - __O uint32_t TASKS_START; /*!< Start RTC Counter. */ - __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */ - __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */ - __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */ - __I uint32_t RESERVED0[60]; - __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */ - __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */ - __I uint32_t RESERVED1[14]; - __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ - __I uint32_t RESERVED2[109]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[13]; - __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */ - __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives - the value of EVTEN. */ - __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register - gives the value of EVTEN. */ - __I uint32_t RESERVED4[110]; - __I uint32_t COUNTER; /*!< Current COUNTER value. */ - __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). - Must be written when RTC is STOPed. */ - __I uint32_t RESERVED5[13]; - __IO uint32_t CC[4]; /*!< Capture/compare registers. */ - __I uint32_t RESERVED6[683]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RTC_Type; - - -/* ================================================================================ */ -/* ================ TEMP ================ */ -/* ================================================================================ */ - - -/** - * @brief Temperature Sensor. (TEMP) - */ - -typedef struct { /*!< TEMP Structure */ - __O uint32_t TASKS_START; /*!< Start temperature measurement. */ - __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[127]; - __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */ - __I uint32_t RESERVED3[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TEMP_Type; - - -/* ================================================================================ */ -/* ================ RNG ================ */ -/* ================================================================================ */ - - -/** - * @brief Random Number Generator. (RNG) - */ - -typedef struct { /*!< RNG Structure */ - __O uint32_t TASKS_START; /*!< Start the random number generator. */ - __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */ - __I uint32_t RESERVED1[63]; - __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */ - __I uint32_t RESERVED3[126]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t VALUE; /*!< RNG random number. */ - __I uint32_t RESERVED4[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RNG_Type; - - -/* ================================================================================ */ -/* ================ ECB ================ */ -/* ================================================================================ */ - - -/** - * @brief AES ECB Mode Encryption. (ECB) - */ - -typedef struct { /*!< ECB Structure */ - __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this - will not initiate a new encryption and the ERRORECB event will - be triggered. */ - __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running, - this will will trigger the ERRORECB event. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */ - __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an - error. */ - __I uint32_t RESERVED1[127]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */ - __I uint32_t RESERVED3[701]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_ECB_Type; - - -/* ================================================================================ */ -/* ================ AAR ================ */ -/* ================================================================================ */ - - -/** - * @brief Accelerated Address Resolver. (AAR) - */ - -typedef struct { /*!< AAR Structure */ - __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK - data structure. */ - __I uint32_t RESERVED0; - __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */ - __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */ - __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t STATUS; /*!< Resolution status. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< Enable AAR. */ - __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */ - __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */ - __I uint32_t RESERVED5; - __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */ - __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage - during resolution. A minimum of 3 bytes must be reserved. */ - __I uint32_t RESERVED6[697]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_AAR_Type; - - -/* ================================================================================ */ -/* ================ CCM ================ */ -/* ================================================================================ */ - - -/** - * @brief AES CCM Mode Encryption. (CCM) - */ - -typedef struct { /*!< CCM Structure */ - __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by - itself when completed. */ - __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when - completed. */ - __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */ - __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */ - __IO uint32_t EVENTS_ERROR; /*!< Error happened. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< CCM enable. */ - __IO uint32_t MODE; /*!< Operation mode. */ - __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */ - __IO uint32_t INPTR; /*!< Pointer to the input packet. */ - __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */ - __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage - during resolution. A minimum of 43 bytes must be reserved. */ - __I uint32_t RESERVED5[697]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_CCM_Type; - - -/* ================================================================================ */ -/* ================ WDT ================ */ -/* ================================================================================ */ - - -/** - * @brief Watchdog Timer. (WDT) - */ - -typedef struct { /*!< WDT Structure */ - __O uint32_t TASKS_START; /*!< Start the watchdog. */ - __I uint32_t RESERVED0[63]; - __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[61]; - __I uint32_t RUNSTATUS; /*!< Watchdog running status. */ - __I uint32_t REQSTATUS; /*!< Request status. */ - __I uint32_t RESERVED3[63]; - __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */ - __IO uint32_t RREN; /*!< Reload request enable. */ - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED4[60]; - __O uint32_t RR[8]; /*!< Reload requests registers. */ - __I uint32_t RESERVED5[631]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_WDT_Type; - - -/* ================================================================================ */ -/* ================ QDEC ================ */ -/* ================================================================================ */ - - -/** - * @brief Rotary decoder. (QDEC) - */ - -typedef struct { /*!< QDEC Structure */ - __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */ - __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */ - __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers, - and clears the ACC registers. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */ - __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and - ACC register different than zero. */ - __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[125]; - __IO uint32_t ENABLE; /*!< Enable the QDEC. */ - __IO uint32_t LEDPOL; /*!< LED output pin polarity. */ - __IO uint32_t SAMPLEPER; /*!< Sample period. */ - __I int32_t SAMPLE; /*!< Motion sample value. */ - __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */ - __I int32_t ACC; /*!< Accumulated valid transitions register. */ - __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC - task. */ - __IO uint32_t PSELLED; /*!< Pin select for LED output. */ - __IO uint32_t PSELA; /*!< Pin select for phase A input. */ - __IO uint32_t PSELB; /*!< Pin select for phase B input. */ - __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */ - __I uint32_t RESERVED4[5]; - __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */ - __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */ - __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC - task. */ - __I uint32_t RESERVED5[684]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_QDEC_Type; - - -/* ================================================================================ */ -/* ================ LPCOMP ================ */ -/* ================================================================================ */ - - -/** - * @brief Low power comparator. (LPCOMP) - */ - -typedef struct { /*!< LPCOMP Structure */ - __O uint32_t TASKS_START; /*!< Start the comparator. */ - __O uint32_t TASKS_STOP; /*!< Stop the comparator. */ - __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */ - __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */ - __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */ - __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */ - __I uint32_t RESERVED1[60]; - __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t RESULT; /*!< Result of last compare. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */ - __IO uint32_t PSEL; /*!< Input pin select. */ - __IO uint32_t REFSEL; /*!< Reference select. */ - __IO uint32_t EXTREFSEL; /*!< External reference select. */ - __I uint32_t RESERVED5[4]; - __IO uint32_t ANADETECT; /*!< Analog detect configuration. */ - __I uint32_t RESERVED6[694]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_LPCOMP_Type; - - -/* ================================================================================ */ -/* ================ SWI ================ */ -/* ================================================================================ */ - - -/** - * @brief SW Interrupts. (SWI) - */ - -typedef struct { /*!< SWI Structure */ - __I uint32_t UNUSED; /*!< Unused. */ -} NRF_SWI_Type; - - -/* ================================================================================ */ -/* ================ NVMC ================ */ -/* ================================================================================ */ - - -/** - * @brief Non Volatile Memory Controller. (NVMC) - */ - -typedef struct { /*!< NVMC Structure */ - __I uint32_t RESERVED0[256]; - __I uint32_t READY; /*!< Ready flag. */ - __I uint32_t RESERVED1[64]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */ - __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */ - __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */ - __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */ -} NRF_NVMC_Type; - - -/* ================================================================================ */ -/* ================ PPI ================ */ -/* ================================================================================ */ - - -/** - * @brief PPI controller. (PPI) - */ - -typedef struct { /*!< PPI Structure */ - PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */ - __I uint32_t RESERVED0[312]; - __IO uint32_t CHEN; /*!< Channel enable. */ - __IO uint32_t CHENSET; /*!< Channel enable set. */ - __IO uint32_t CHENCLR; /*!< Channel enable clear. */ - __I uint32_t RESERVED1; - PPI_CH_Type CH[16]; /*!< PPI Channel. */ - __I uint32_t RESERVED2[156]; - __IO uint32_t CHG[4]; /*!< Channel group configuration. */ -} NRF_PPI_Type; - - -/* ================================================================================ */ -/* ================ FICR ================ */ -/* ================================================================================ */ - - -/** - * @brief Factory Information Configuration. (FICR) - */ - -typedef struct { /*!< FICR Structure */ - __I uint32_t RESERVED0[4]; - __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */ - __I uint32_t CODESIZE; /*!< Code memory size in pages. */ - __I uint32_t RBD; /*!< RBD. */ - __I uint32_t RESERVED1[3]; - __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */ - __I uint32_t PPFC; /*!< Pre-programmed factory code present. */ - __I uint32_t RESERVED2; - __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */ - - union { - __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is - kept for backward compatinility purposes. Use SIZERAMBLOCKS - instead. */ - __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */ - } ; - __I uint32_t RESERVED3[5]; - __I uint32_t CONFIGID; /*!< Configuration identifier. */ - __I uint32_t DEVICEID[2]; /*!< Device identifier. */ - __I uint32_t RESERVED4[6]; - __I uint32_t ER[4]; /*!< Encryption root. */ - __I uint32_t IR[4]; /*!< Identity root. */ - __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */ - __I uint32_t DEVICEADDR[2]; /*!< Device address. */ - __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */ - __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit - mode. */ - __I uint32_t RESERVED5[10]; - __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit - mode. */ -} NRF_FICR_Type; - - -/* ================================================================================ */ -/* ================ UICR ================ */ -/* ================================================================================ */ - - -/** - * @brief User Information Configuration. (UICR) - */ - -typedef struct { /*!< UICR Structure */ - __IO uint32_t CLENR0; /*!< Length of code region 0. */ - __IO uint32_t RBPCONF; /*!< Readback protection configuration. */ - __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */ - __I uint32_t RESERVED0; - __I uint32_t FWID; /*!< Firmware ID. */ - __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */ -} NRF_UICR_Type; - - -/* ================================================================================ */ -/* ================ GPIO ================ */ -/* ================================================================================ */ - - -/** - * @brief General purpose input and output. (GPIO) - */ - -typedef struct { /*!< GPIO Structure */ - __I uint32_t RESERVED0[321]; - __IO uint32_t OUT; /*!< Write GPIO port. */ - __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */ - __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */ - __I uint32_t IN; /*!< Read GPIO port. */ - __IO uint32_t DIR; /*!< Direction of GPIO pins. */ - __IO uint32_t DIRSET; /*!< DIR set register. */ - __IO uint32_t DIRCLR; /*!< DIR clear register. */ - __I uint32_t RESERVED1[120]; - __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */ -} NRF_GPIO_Type; - - -/* -------------------- End of section using anonymous unions ------------------- */ -#if defined(__CC_ARM) - #pragma pop -#elif defined(__ICCARM__) - /* leave anonymous unions enabled */ -#elif defined(__GNUC__) - /* anonymous unions are enabled by default */ -#elif defined(__TMS470__) - /* anonymous unions are enabled by default */ -#elif defined(__TASKING__) - #pragma warning restore -#else - #warning Not supported compiler type -#endif - - - - -/* ================================================================================ */ -/* ================ Peripheral memory map ================ */ -/* ================================================================================ */ - -#define NRF_POWER_BASE 0x40000000UL -#define NRF_CLOCK_BASE 0x40000000UL -#define NRF_MPU_BASE 0x40000000UL -#define NRF_PU_BASE 0x40000000UL -#define NRF_AMLI_BASE 0x40000000UL -#define NRF_RADIO_BASE 0x40001000UL -#define NRF_UART0_BASE 0x40002000UL -#define NRF_SPI0_BASE 0x40003000UL -#define NRF_TWI0_BASE 0x40003000UL -#define NRF_SPI1_BASE 0x40004000UL -#define NRF_TWI1_BASE 0x40004000UL -#define NRF_SPIS1_BASE 0x40004000UL -#define NRF_GPIOTE_BASE 0x40006000UL -#define NRF_ADC_BASE 0x40007000UL -#define NRF_TIMER0_BASE 0x40008000UL -#define NRF_TIMER1_BASE 0x40009000UL -#define NRF_TIMER2_BASE 0x4000A000UL -#define NRF_RTC0_BASE 0x4000B000UL -#define NRF_TEMP_BASE 0x4000C000UL -#define NRF_RNG_BASE 0x4000D000UL -#define NRF_ECB_BASE 0x4000E000UL -#define NRF_AAR_BASE 0x4000F000UL -#define NRF_CCM_BASE 0x4000F000UL -#define NRF_WDT_BASE 0x40010000UL -#define NRF_RTC1_BASE 0x40011000UL -#define NRF_QDEC_BASE 0x40012000UL -#define NRF_LPCOMP_BASE 0x40013000UL -#define NRF_SWI_BASE 0x40014000UL -#define NRF_NVMC_BASE 0x4001E000UL -#define NRF_PPI_BASE 0x4001F000UL -#define NRF_FICR_BASE 0x10000000UL -#define NRF_UICR_BASE 0x10001000UL -#define NRF_GPIO_BASE 0x50000000UL - - -/* ================================================================================ */ -/* ================ Peripheral declaration ================ */ -/* ================================================================================ */ - -#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE) -#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE) -#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE) -#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE) -#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE) -#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE) -#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE) -#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE) -#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE) -#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE) -#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE) -#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE) -#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE) -#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE) -#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE) -#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE) -#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE) -#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE) -#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE) -#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE) -#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE) -#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE) -#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE) -#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE) -#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE) -#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE) -#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE) -#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE) -#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE) -#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE) -#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE) -#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE) -#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE) - - -/** @} */ /* End of group Device_Peripheral_Registers */ -/** @} */ /* End of group nRF51 */ -/** @} */ /* End of group Nordic Semiconductor */ - -#ifdef __cplusplus -} -#endif - - -#endif /* nRF51_H */ - +/****************************************************************************************************/ +/** + * @file nRF51.h + * + * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for + * nRF51 from Nordic Semiconductor. + * + * @version V522 + * @date 4. March 2014 + * + * @note Generated with SVDConv V2.77p + * from CMSIS SVD File 'nRF51.xml' Version 522, + * + * @par Copyright (c) 2013, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + *******************************************************************************************************/ + + + +/** @addtogroup cpu_specific_Nordic Semiconductor + * @{ + */ + +/** @addtogroup cpu_specific_nRF51 + * @{ + */ + +#ifndef NRF51_H +#define NRF51_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* ------------------------- Interrupt Number Definition ------------------------ */ + +typedef enum { +/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */ + Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ + HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ + SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ + DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ + PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ + SysTick_IRQn = -1, /*!< 15 System Tick Timer */ +/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */ + POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */ + RADIO_IRQn = 1, /*!< 1 RADIO */ + UART0_IRQn = 2, /*!< 2 UART0 */ + SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */ + SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */ + GPIOTE_IRQn = 6, /*!< 6 GPIOTE */ + ADC_IRQn = 7, /*!< 7 ADC */ + TIMER0_IRQn = 8, /*!< 8 TIMER0 */ + TIMER1_IRQn = 9, /*!< 9 TIMER1 */ + TIMER2_IRQn = 10, /*!< 10 TIMER2 */ + RTC0_IRQn = 11, /*!< 11 RTC0 */ + TEMP_IRQn = 12, /*!< 12 TEMP */ + RNG_IRQn = 13, /*!< 13 RNG */ + ECB_IRQn = 14, /*!< 14 ECB */ + CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */ + WDT_IRQn = 16, /*!< 16 WDT */ + RTC1_IRQn = 17, /*!< 17 RTC1 */ + QDEC_IRQn = 18, /*!< 18 QDEC */ + LPCOMP_IRQn = 19, /*!< 19 LPCOMP */ + SWI0_IRQn = 20, /*!< 20 SWI0 */ + SWI1_IRQn = 21, /*!< 21 SWI1 */ + SWI2_IRQn = 22, /*!< 22 SWI2 */ + SWI3_IRQn = 23, /*!< 23 SWI3 */ + SWI4_IRQn = 24, /*!< 24 SWI4 */ + SWI5_IRQn = 25 /*!< 25 SWI5 */ +} IRQn_Type; + + +/** @addtogroup Configuration_of_CMSIS + * @{ + */ + + +/* ================================================================================ */ +/* ================ Processor and Core Peripheral Section ================ */ +/* ================================================================================ */ + +/* ----------------Configuration of the cm0 Processor and Core Peripherals---------------- */ +#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */ +#define __MPU_PRESENT 0 /*!< MPU present or not */ +#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +/** @} */ /* End of group Configuration_of_CMSIS */ + +#ifdef __cplusplus +} +#endif + +#include /*!< Cortex-M0 processor and core peripherals */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* ================================================================================ */ +/* ================ Device Specific Peripheral Section ================ */ +/* ================================================================================ */ + + +/** @addtogroup cpu_specific_Device_Peripheral_Registers + * @{ + */ + + +/* ------------------- Start of section using anonymous unions ------------------ */ +#if defined(__CC_ARM) + #pragma push + #pragma anon_unions +#elif defined(__ICCARM__) + #pragma language=extended +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__TMS470__) +/* anonymous unions are enabled by default */ +#elif defined(__TASKING__) + #pragma warning 586 +#else + #warning Not supported compiler type +#endif + + +typedef struct { + __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */ + __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */ + __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */ + __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */ + __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */ + __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */ +} AMLI_RAMPRI_Type; + +typedef struct { + __O uint32_t EN; /*!< Enable channel group. */ + __O uint32_t DIS; /*!< Disable channel group. */ +} PPI_TASKS_CHG_Type; + +typedef struct { + __IO uint32_t EEP; /*!< Channel event end-point. */ + __IO uint32_t TEP; /*!< Channel task end-point. */ +} PPI_CH_Type; + + +/* ================================================================================ */ +/* ================ POWER ================ */ +/* ================================================================================ */ + + +/** + * @brief Power Control. (POWER) + */ + +typedef struct { /*!< POWER Structure */ + __I uint32_t RESERVED0[30]; + __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */ + __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */ + __I uint32_t RESERVED1[34]; + __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */ + __I uint32_t RESERVED2[126]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[61]; + __IO uint32_t RESETREAS; /*!< Reset reason. */ + __I uint32_t RESERVED4[9]; + __I uint32_t RAMSTATUS; /*!< Ram status register. */ + __I uint32_t RESERVED5[53]; + __O uint32_t SYSTEMOFF; /*!< System off register. */ + __I uint32_t RESERVED6[3]; + __IO uint32_t POFCON; /*!< Power failure configuration. */ + __I uint32_t RESERVED7[2]; + __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained + register. */ + __I uint32_t RESERVED8; + __IO uint32_t RAMON; /*!< Ram on/off. */ + __I uint32_t RESERVED9[7]; + __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register + is a retained register. */ + __I uint32_t RESERVED10[3]; + __IO uint32_t RAMONB; /*!< Ram on/off. */ + __I uint32_t RESERVED11[8]; + __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */ + __I uint32_t RESERVED12[291]; + __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */ +} NRF_POWER_Type; + + +/* ================================================================================ */ +/* ================ CLOCK ================ */ +/* ================================================================================ */ + + +/** + * @brief Clock control. (CLOCK) + */ + +typedef struct { /*!< CLOCK Structure */ + __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */ + __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */ + __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */ + __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */ + __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */ + __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */ + __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */ + __I uint32_t RESERVED0[57]; + __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */ + __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */ + __I uint32_t RESERVED1; + __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */ + __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */ + __I uint32_t RESERVED2[124]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[63]; + __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */ + __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */ + __I uint32_t RESERVED4; + __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */ + __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */ + __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is + triggered. */ + __I uint32_t RESERVED5[62]; + __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */ + __I uint32_t RESERVED6[7]; + __IO uint32_t CTIV; /*!< Calibration timer interval. */ + __I uint32_t RESERVED7[5]; + __IO uint32_t XTALFREQ; /*!< Crystal frequency. */ +} NRF_CLOCK_Type; + + +/* ================================================================================ */ +/* ================ MPU ================ */ +/* ================================================================================ */ + + +/** + * @brief Memory Protection Unit. (MPU) + */ + +typedef struct { /*!< MPU Structure */ + __I uint32_t RESERVED0[330]; + __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */ + __IO uint32_t RLENR0; /*!< Length of RAM region 0. */ + __I uint32_t RESERVED1[52]; + __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */ + __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */ + __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */ + __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */ + __I uint32_t RESERVED2[255]; + __IO uint32_t ENRBDREG; /*!< Enable or disable RBD. */ +} NRF_MPU_Type; + + +/* ================================================================================ */ +/* ================ PU ================ */ +/* ================================================================================ */ + + +/** + * @brief Patch unit. (PU) + */ + +typedef struct { /*!< PU Structure */ + __I uint32_t RESERVED0[448]; + __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */ + __I uint32_t RESERVED1[24]; + __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */ + __I uint32_t RESERVED2[24]; + __IO uint32_t PATCHEN; /*!< Patch enable register. */ + __IO uint32_t PATCHENSET; /*!< Patch enable register. */ + __IO uint32_t PATCHENCLR; /*!< Patch disable register. */ +} NRF_PU_Type; + + +/* ================================================================================ */ +/* ================ AMLI ================ */ +/* ================================================================================ */ + + +/** + * @brief AHB Multi-Layer Interface. (AMLI) + */ + +typedef struct { /*!< AMLI Structure */ + __I uint32_t RESERVED0[896]; + AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */ +} NRF_AMLI_Type; + + +/* ================================================================================ */ +/* ================ RADIO ================ */ +/* ================================================================================ */ + + +/** + * @brief The radio. (RADIO) + */ + +typedef struct { /*!< RADIO Structure */ + __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */ + __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */ + __O uint32_t TASKS_START; /*!< Start radio. */ + __O uint32_t TASKS_STOP; /*!< Stop radio. */ + __O uint32_t TASKS_DISABLE; /*!< Disable radio. */ + __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */ + __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */ + __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */ + __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */ + __I uint32_t RESERVED0[55]; + __IO uint32_t EVENTS_READY; /*!< Ready event. */ + __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */ + __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */ + __IO uint32_t EVENTS_END; /*!< End event. */ + __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */ + __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */ + __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */ + __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI + sample is ready for readout at the RSSISAMPLE register. */ + __I uint32_t RESERVED1[2]; + __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */ + __I uint32_t RESERVED2[53]; + __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */ + __I uint32_t RESERVED3[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED4[61]; + __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */ + __I uint32_t CD; /*!< Carrier detect. */ + __I uint32_t RXMATCH; /*!< Received address. */ + __I uint32_t RXCRC; /*!< Received CRC. */ + __I uint32_t DAI; /*!< Device address match index. */ + __I uint32_t RESERVED5[60]; + __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */ + __IO uint32_t FREQUENCY; /*!< Frequency. */ + __IO uint32_t TXPOWER; /*!< Output power. */ + __IO uint32_t MODE; /*!< Data rate and modulation. */ + __IO uint32_t PCNF0; /*!< Packet configuration 0. */ + __IO uint32_t PCNF1; /*!< Packet configuration 1. */ + __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */ + __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */ + __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */ + __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */ + __IO uint32_t TXADDRESS; /*!< Transmit address select. */ + __IO uint32_t RXADDRESSES; /*!< Receive address select. */ + __IO uint32_t CRCCNF; /*!< CRC configuration. */ + __IO uint32_t CRCPOLY; /*!< CRC polynomial. */ + __IO uint32_t CRCINIT; /*!< CRC initial value. */ + __IO uint32_t TEST; /*!< Test features enable register. */ + __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */ + __I uint32_t RSSISAMPLE; /*!< RSSI sample. */ + __I uint32_t RESERVED6; + __I uint32_t STATE; /*!< Current radio state. */ + __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */ + __I uint32_t RESERVED7[2]; + __IO uint32_t BCC; /*!< Bit counter compare. */ + __I uint32_t RESERVED8[39]; + __IO uint32_t DAB[8]; /*!< Device address base segment. */ + __IO uint32_t DAP[8]; /*!< Device address prefix. */ + __IO uint32_t DACNF; /*!< Device address match configuration. */ + __I uint32_t RESERVED9[56]; + __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */ + __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */ + __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */ + __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */ + __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */ + __I uint32_t RESERVED10[561]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_RADIO_Type; + + +/* ================================================================================ */ +/* ================ UART ================ */ +/* ================================================================================ */ + + +/** + * @brief Universal Asynchronous Receiver/Transmitter. (UART) + */ + +typedef struct { /*!< UART Structure */ + __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */ + __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */ + __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */ + __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */ + __I uint32_t RESERVED0[3]; + __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */ + __I uint32_t RESERVED1[56]; + __IO uint32_t EVENTS_CTS; /*!< CTS activated. */ + __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */ + __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */ + __I uint32_t RESERVED2[4]; + __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */ + __I uint32_t RESERVED3; + __IO uint32_t EVENTS_ERROR; /*!< Error detected. */ + __I uint32_t RESERVED4[7]; + __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ + __I uint32_t RESERVED5[46]; + __IO uint32_t SHORTS; /*!< Shortcuts for UART. */ + __I uint32_t RESERVED6[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED7[93]; + __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */ + __I uint32_t RESERVED8[31]; + __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */ + __I uint32_t RESERVED9; + __IO uint32_t PSELRTS; /*!< Pin select for RTS. */ + __IO uint32_t PSELTXD; /*!< Pin select for TXD. */ + __IO uint32_t PSELCTS; /*!< Pin select for CTS. */ + __IO uint32_t PSELRXD; /*!< Pin select for RXD. */ + __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced. + Once read the character is consummed. If read when no character + available, the UART will stop working. */ + __O uint32_t TXD; /*!< TXD register. */ + __I uint32_t RESERVED10; + __IO uint32_t BAUDRATE; /*!< UART Baudrate. */ + __I uint32_t RESERVED11[17]; + __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */ + __I uint32_t RESERVED12[675]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_UART_Type; + + +/* ================================================================================ */ +/* ================ SPI ================ */ +/* ================================================================================ */ + + +/** + * @brief SPI master 0. (SPI) + */ + +typedef struct { /*!< SPI Structure */ + __I uint32_t RESERVED0[66]; + __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */ + __I uint32_t RESERVED1[126]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED2[125]; + __IO uint32_t ENABLE; /*!< Enable SPI. */ + __I uint32_t RESERVED3; + __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ + __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ + __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ + __I uint32_t RESERVED4; + __I uint32_t RXD; /*!< RX data. */ + __IO uint32_t TXD; /*!< TX data. */ + __I uint32_t RESERVED5; + __IO uint32_t FREQUENCY; /*!< SPI frequency */ + __I uint32_t RESERVED6[11]; + __IO uint32_t CONFIG; /*!< Configuration register. */ + __I uint32_t RESERVED7[681]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_SPI_Type; + + +/* ================================================================================ */ +/* ================ TWI ================ */ +/* ================================================================================ */ + + +/** + * @brief Two-wire interface master 0. (TWI) + */ + +typedef struct { /*!< TWI Structure */ + __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */ + __I uint32_t RESERVED0; + __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */ + __I uint32_t RESERVED1[2]; + __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */ + __I uint32_t RESERVED2; + __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */ + __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */ + __I uint32_t RESERVED3[56]; + __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */ + __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */ + __I uint32_t RESERVED4[4]; + __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */ + __I uint32_t RESERVED5; + __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */ + __I uint32_t RESERVED6[4]; + __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */ + __I uint32_t RESERVED7[3]; + __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */ + __I uint32_t RESERVED8[45]; + __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ + __I uint32_t RESERVED9[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED10[110]; + __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */ + __I uint32_t RESERVED11[14]; + __IO uint32_t ENABLE; /*!< Enable two-wire master. */ + __I uint32_t RESERVED12; + __IO uint32_t PSELSCL; /*!< Pin select for SCL. */ + __IO uint32_t PSELSDA; /*!< Pin select for SDA. */ + __I uint32_t RESERVED13[2]; + __I uint32_t RXD; /*!< RX data register. */ + __IO uint32_t TXD; /*!< TX data register. */ + __I uint32_t RESERVED14; + __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */ + __I uint32_t RESERVED15[24]; + __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */ + __I uint32_t RESERVED16[668]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_TWI_Type; + + +/* ================================================================================ */ +/* ================ SPIS ================ */ +/* ================================================================================ */ + + +/** + * @brief SPI slave 1. (SPIS) + */ + +typedef struct { /*!< SPIS Structure */ + __I uint32_t RESERVED0[9]; + __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */ + __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */ + __I uint32_t RESERVED1[54]; + __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */ + __I uint32_t RESERVED2[8]; + __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */ + __I uint32_t RESERVED3[53]; + __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */ + __I uint32_t RESERVED4[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED5[61]; + __I uint32_t SEMSTAT; /*!< Semaphore status. */ + __I uint32_t RESERVED6[15]; + __IO uint32_t STATUS; /*!< Status from last transaction. */ + __I uint32_t RESERVED7[47]; + __IO uint32_t ENABLE; /*!< Enable SPIS. */ + __I uint32_t RESERVED8; + __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ + __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ + __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ + __IO uint32_t PSELCSN; /*!< Pin select for CSN. */ + __I uint32_t RESERVED9[7]; + __IO uint32_t RXDPTR; /*!< RX data pointer. */ + __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */ + __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */ + __I uint32_t RESERVED10; + __IO uint32_t TXDPTR; /*!< TX data pointer. */ + __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */ + __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */ + __I uint32_t RESERVED11; + __IO uint32_t CONFIG; /*!< Configuration register. */ + __I uint32_t RESERVED12; + __IO uint32_t DEF; /*!< Default character. */ + __I uint32_t RESERVED13[24]; + __IO uint32_t ORC; /*!< Over-read character. */ + __I uint32_t RESERVED14[654]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_SPIS_Type; + + +/* ================================================================================ */ +/* ================ GPIOTE ================ */ +/* ================================================================================ */ + + +/** + * @brief GPIO tasks and events. (GPIOTE) + */ + +typedef struct { /*!< GPIOTE Structure */ + __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */ + __I uint32_t RESERVED0[60]; + __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */ + __I uint32_t RESERVED1[27]; + __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */ + __I uint32_t RESERVED2[97]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[129]; + __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */ + __I uint32_t RESERVED4[695]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_GPIOTE_Type; + + +/* ================================================================================ */ +/* ================ ADC ================ */ +/* ================================================================================ */ + + +/** + * @brief Analog to digital converter. (ADC) + */ + +typedef struct { /*!< ADC Structure */ + __O uint32_t TASKS_START; /*!< Start an ADC conversion. */ + __O uint32_t TASKS_STOP; /*!< Stop ADC. */ + __I uint32_t RESERVED0[62]; + __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */ + __I uint32_t RESERVED1[128]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED2[61]; + __I uint32_t BUSY; /*!< ADC busy register. */ + __I uint32_t RESERVED3[63]; + __IO uint32_t ENABLE; /*!< ADC enable. */ + __IO uint32_t CONFIG; /*!< ADC configuration register. */ + __I uint32_t RESULT; /*!< Result of ADC conversion. */ + __I uint32_t RESERVED4[700]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_ADC_Type; + + +/* ================================================================================ */ +/* ================ TIMER ================ */ +/* ================================================================================ */ + + +/** + * @brief Timer 0. (TIMER) + */ + +typedef struct { /*!< TIMER Structure */ + __O uint32_t TASKS_START; /*!< Start Timer. */ + __O uint32_t TASKS_STOP; /*!< Stop Timer. */ + __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */ + __O uint32_t TASKS_CLEAR; /*!< Clear timer. */ + __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */ + __I uint32_t RESERVED0[11]; + __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */ + __I uint32_t RESERVED1[60]; + __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ + __I uint32_t RESERVED2[44]; + __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */ + __I uint32_t RESERVED3[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED4[126]; + __IO uint32_t MODE; /*!< Timer Mode selection. */ + __IO uint32_t BITMODE; /*!< Sets timer behaviour. */ + __I uint32_t RESERVED5; + __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source + clock frequency is divided by 2^SCALE. */ + __I uint32_t RESERVED6[11]; + __IO uint32_t CC[4]; /*!< Capture/compare registers. */ + __I uint32_t RESERVED7[683]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_TIMER_Type; + + +/* ================================================================================ */ +/* ================ RTC ================ */ +/* ================================================================================ */ + + +/** + * @brief Real time counter 0. (RTC) + */ + +typedef struct { /*!< RTC Structure */ + __O uint32_t TASKS_START; /*!< Start RTC Counter. */ + __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */ + __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */ + __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */ + __I uint32_t RESERVED0[60]; + __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */ + __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */ + __I uint32_t RESERVED1[14]; + __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ + __I uint32_t RESERVED2[109]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[13]; + __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */ + __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives + the value of EVTEN. */ + __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register + gives the value of EVTEN. */ + __I uint32_t RESERVED4[110]; + __I uint32_t COUNTER; /*!< Current COUNTER value. */ + __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). + Must be written when RTC is STOPed. */ + __I uint32_t RESERVED5[13]; + __IO uint32_t CC[4]; /*!< Capture/compare registers. */ + __I uint32_t RESERVED6[683]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_RTC_Type; + + +/* ================================================================================ */ +/* ================ TEMP ================ */ +/* ================================================================================ */ + + +/** + * @brief Temperature Sensor. (TEMP) + */ + +typedef struct { /*!< TEMP Structure */ + __O uint32_t TASKS_START; /*!< Start temperature measurement. */ + __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */ + __I uint32_t RESERVED0[62]; + __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */ + __I uint32_t RESERVED1[128]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED2[127]; + __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */ + __I uint32_t RESERVED3[700]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_TEMP_Type; + + +/* ================================================================================ */ +/* ================ RNG ================ */ +/* ================================================================================ */ + + +/** + * @brief Random Number Generator. (RNG) + */ + +typedef struct { /*!< RNG Structure */ + __O uint32_t TASKS_START; /*!< Start the random number generator. */ + __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */ + __I uint32_t RESERVED0[62]; + __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */ + __I uint32_t RESERVED1[63]; + __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */ + __I uint32_t RESERVED2[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */ + __I uint32_t RESERVED3[126]; + __IO uint32_t CONFIG; /*!< Configuration register. */ + __I uint32_t VALUE; /*!< RNG random number. */ + __I uint32_t RESERVED4[700]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_RNG_Type; + + +/* ================================================================================ */ +/* ================ ECB ================ */ +/* ================================================================================ */ + + +/** + * @brief AES ECB Mode Encryption. (ECB) + */ + +typedef struct { /*!< ECB Structure */ + __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this + will not initiate a new encryption and the ERRORECB event will + be triggered. */ + __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running, + this will will trigger the ERRORECB event. */ + __I uint32_t RESERVED0[62]; + __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */ + __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an + error. */ + __I uint32_t RESERVED1[127]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED2[126]; + __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */ + __I uint32_t RESERVED3[701]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_ECB_Type; + + +/* ================================================================================ */ +/* ================ AAR ================ */ +/* ================================================================================ */ + + +/** + * @brief Accelerated Address Resolver. (AAR) + */ + +typedef struct { /*!< AAR Structure */ + __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK + data structure. */ + __I uint32_t RESERVED0; + __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */ + __I uint32_t RESERVED1[61]; + __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */ + __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */ + __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */ + __I uint32_t RESERVED2[126]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[61]; + __I uint32_t STATUS; /*!< Resolution status. */ + __I uint32_t RESERVED4[63]; + __IO uint32_t ENABLE; /*!< Enable AAR. */ + __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */ + __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */ + __I uint32_t RESERVED5; + __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */ + __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage + during resolution. A minimum of 3 bytes must be reserved. */ + __I uint32_t RESERVED6[697]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_AAR_Type; + + +/* ================================================================================ */ +/* ================ CCM ================ */ +/* ================================================================================ */ + + +/** + * @brief AES CCM Mode Encryption. (CCM) + */ + +typedef struct { /*!< CCM Structure */ + __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by + itself when completed. */ + __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when + completed. */ + __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */ + __I uint32_t RESERVED0[61]; + __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */ + __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */ + __IO uint32_t EVENTS_ERROR; /*!< Error happened. */ + __I uint32_t RESERVED1[61]; + __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */ + __I uint32_t RESERVED2[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[61]; + __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */ + __I uint32_t RESERVED4[63]; + __IO uint32_t ENABLE; /*!< CCM enable. */ + __IO uint32_t MODE; /*!< Operation mode. */ + __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */ + __IO uint32_t INPTR; /*!< Pointer to the input packet. */ + __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */ + __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage + during resolution. A minimum of 43 bytes must be reserved. */ + __I uint32_t RESERVED5[697]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_CCM_Type; + + +/* ================================================================================ */ +/* ================ WDT ================ */ +/* ================================================================================ */ + + +/** + * @brief Watchdog Timer. (WDT) + */ + +typedef struct { /*!< WDT Structure */ + __O uint32_t TASKS_START; /*!< Start the watchdog. */ + __I uint32_t RESERVED0[63]; + __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */ + __I uint32_t RESERVED1[128]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED2[61]; + __I uint32_t RUNSTATUS; /*!< Watchdog running status. */ + __I uint32_t REQSTATUS; /*!< Request status. */ + __I uint32_t RESERVED3[63]; + __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */ + __IO uint32_t RREN; /*!< Reload request enable. */ + __IO uint32_t CONFIG; /*!< Configuration register. */ + __I uint32_t RESERVED4[60]; + __O uint32_t RR[8]; /*!< Reload requests registers. */ + __I uint32_t RESERVED5[631]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_WDT_Type; + + +/* ================================================================================ */ +/* ================ QDEC ================ */ +/* ================================================================================ */ + + +/** + * @brief Rotary decoder. (QDEC) + */ + +typedef struct { /*!< QDEC Structure */ + __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */ + __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */ + __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers, + and clears the ACC registers. */ + __I uint32_t RESERVED0[61]; + __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */ + __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and + ACC register different than zero. */ + __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */ + __I uint32_t RESERVED1[61]; + __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */ + __I uint32_t RESERVED2[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[125]; + __IO uint32_t ENABLE; /*!< Enable the QDEC. */ + __IO uint32_t LEDPOL; /*!< LED output pin polarity. */ + __IO uint32_t SAMPLEPER; /*!< Sample period. */ + __I int32_t SAMPLE; /*!< Motion sample value. */ + __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */ + __I int32_t ACC; /*!< Accumulated valid transitions register. */ + __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC + task. */ + __IO uint32_t PSELLED; /*!< Pin select for LED output. */ + __IO uint32_t PSELA; /*!< Pin select for phase A input. */ + __IO uint32_t PSELB; /*!< Pin select for phase B input. */ + __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */ + __I uint32_t RESERVED4[5]; + __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */ + __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */ + __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC + task. */ + __I uint32_t RESERVED5[684]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_QDEC_Type; + + +/* ================================================================================ */ +/* ================ LPCOMP ================ */ +/* ================================================================================ */ + + +/** + * @brief Low power comparator. (LPCOMP) + */ + +typedef struct { /*!< LPCOMP Structure */ + __O uint32_t TASKS_START; /*!< Start the comparator. */ + __O uint32_t TASKS_STOP; /*!< Stop the comparator. */ + __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */ + __I uint32_t RESERVED0[61]; + __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */ + __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */ + __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */ + __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */ + __I uint32_t RESERVED1[60]; + __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */ + __I uint32_t RESERVED2[64]; + __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ + __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ + __I uint32_t RESERVED3[61]; + __I uint32_t RESULT; /*!< Result of last compare. */ + __I uint32_t RESERVED4[63]; + __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */ + __IO uint32_t PSEL; /*!< Input pin select. */ + __IO uint32_t REFSEL; /*!< Reference select. */ + __IO uint32_t EXTREFSEL; /*!< External reference select. */ + __I uint32_t RESERVED5[4]; + __IO uint32_t ANADETECT; /*!< Analog detect configuration. */ + __I uint32_t RESERVED6[694]; + __IO uint32_t POWER; /*!< Peripheral power control. */ +} NRF_LPCOMP_Type; + + +/* ================================================================================ */ +/* ================ SWI ================ */ +/* ================================================================================ */ + + +/** + * @brief SW Interrupts. (SWI) + */ + +typedef struct { /*!< SWI Structure */ + __I uint32_t UNUSED; /*!< Unused. */ +} NRF_SWI_Type; + + +/* ================================================================================ */ +/* ================ NVMC ================ */ +/* ================================================================================ */ + + +/** + * @brief Non Volatile Memory Controller. (NVMC) + */ + +typedef struct { /*!< NVMC Structure */ + __I uint32_t RESERVED0[256]; + __I uint32_t READY; /*!< Ready flag. */ + __I uint32_t RESERVED1[64]; + __IO uint32_t CONFIG; /*!< Configuration register. */ + __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */ + __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */ + __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */ + __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */ +} NRF_NVMC_Type; + + +/* ================================================================================ */ +/* ================ PPI ================ */ +/* ================================================================================ */ + + +/** + * @brief PPI controller. (PPI) + */ + +typedef struct { /*!< PPI Structure */ + PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */ + __I uint32_t RESERVED0[312]; + __IO uint32_t CHEN; /*!< Channel enable. */ + __IO uint32_t CHENSET; /*!< Channel enable set. */ + __IO uint32_t CHENCLR; /*!< Channel enable clear. */ + __I uint32_t RESERVED1; + PPI_CH_Type CH[16]; /*!< PPI Channel. */ + __I uint32_t RESERVED2[156]; + __IO uint32_t CHG[4]; /*!< Channel group configuration. */ +} NRF_PPI_Type; + + +/* ================================================================================ */ +/* ================ FICR ================ */ +/* ================================================================================ */ + + +/** + * @brief Factory Information Configuration. (FICR) + */ + +typedef struct { /*!< FICR Structure */ + __I uint32_t RESERVED0[4]; + __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */ + __I uint32_t CODESIZE; /*!< Code memory size in pages. */ + __I uint32_t RBD; /*!< RBD. */ + __I uint32_t RESERVED1[3]; + __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */ + __I uint32_t PPFC; /*!< Pre-programmed factory code present. */ + __I uint32_t RESERVED2; + __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */ + + union { + __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is + kept for backward compatinility purposes. Use SIZERAMBLOCKS + instead. */ + __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */ + } ; + __I uint32_t RESERVED3[5]; + __I uint32_t CONFIGID; /*!< Configuration identifier. */ + __I uint32_t DEVICEID[2]; /*!< Device identifier. */ + __I uint32_t RESERVED4[6]; + __I uint32_t ER[4]; /*!< Encryption root. */ + __I uint32_t IR[4]; /*!< Identity root. */ + __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */ + __I uint32_t DEVICEADDR[2]; /*!< Device address. */ + __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */ + __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit + mode. */ + __I uint32_t RESERVED5[10]; + __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit + mode. */ +} NRF_FICR_Type; + + +/* ================================================================================ */ +/* ================ UICR ================ */ +/* ================================================================================ */ + + +/** + * @brief User Information Configuration. (UICR) + */ + +typedef struct { /*!< UICR Structure */ + __IO uint32_t CLENR0; /*!< Length of code region 0. */ + __IO uint32_t RBPCONF; /*!< Readback protection configuration. */ + __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */ + __I uint32_t RESERVED0; + __I uint32_t FWID; /*!< Firmware ID. */ + __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */ +} NRF_UICR_Type; + + +/* ================================================================================ */ +/* ================ GPIO ================ */ +/* ================================================================================ */ + + +/** + * @brief General purpose input and output. (GPIO) + */ + +typedef struct { /*!< GPIO Structure */ + __I uint32_t RESERVED0[321]; + __IO uint32_t OUT; /*!< Write GPIO port. */ + __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */ + __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */ + __I uint32_t IN; /*!< Read GPIO port. */ + __IO uint32_t DIR; /*!< Direction of GPIO pins. */ + __IO uint32_t DIRSET; /*!< DIR set register. */ + __IO uint32_t DIRCLR; /*!< DIR clear register. */ + __I uint32_t RESERVED1[120]; + __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */ +} NRF_GPIO_Type; + + +/* -------------------- End of section using anonymous unions ------------------- */ +#if defined(__CC_ARM) + #pragma pop +#elif defined(__ICCARM__) + /* leave anonymous unions enabled */ +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__TMS470__) + /* anonymous unions are enabled by default */ +#elif defined(__TASKING__) + #pragma warning restore +#else + #warning Not supported compiler type +#endif + + + + +/* ================================================================================ */ +/* ================ Peripheral memory map ================ */ +/* ================================================================================ */ + +#define NRF_POWER_BASE 0x40000000UL +#define NRF_CLOCK_BASE 0x40000000UL +#define NRF_MPU_BASE 0x40000000UL +#define NRF_PU_BASE 0x40000000UL +#define NRF_AMLI_BASE 0x40000000UL +#define NRF_RADIO_BASE 0x40001000UL +#define NRF_UART0_BASE 0x40002000UL +#define NRF_SPI0_BASE 0x40003000UL +#define NRF_TWI0_BASE 0x40003000UL +#define NRF_SPI1_BASE 0x40004000UL +#define NRF_TWI1_BASE 0x40004000UL +#define NRF_SPIS1_BASE 0x40004000UL +#define NRF_GPIOTE_BASE 0x40006000UL +#define NRF_ADC_BASE 0x40007000UL +#define NRF_TIMER0_BASE 0x40008000UL +#define NRF_TIMER1_BASE 0x40009000UL +#define NRF_TIMER2_BASE 0x4000A000UL +#define NRF_RTC0_BASE 0x4000B000UL +#define NRF_TEMP_BASE 0x4000C000UL +#define NRF_RNG_BASE 0x4000D000UL +#define NRF_ECB_BASE 0x4000E000UL +#define NRF_AAR_BASE 0x4000F000UL +#define NRF_CCM_BASE 0x4000F000UL +#define NRF_WDT_BASE 0x40010000UL +#define NRF_RTC1_BASE 0x40011000UL +#define NRF_QDEC_BASE 0x40012000UL +#define NRF_LPCOMP_BASE 0x40013000UL +#define NRF_SWI_BASE 0x40014000UL +#define NRF_NVMC_BASE 0x4001E000UL +#define NRF_PPI_BASE 0x4001F000UL +#define NRF_FICR_BASE 0x10000000UL +#define NRF_UICR_BASE 0x10001000UL +#define NRF_GPIO_BASE 0x50000000UL + + +/* ================================================================================ */ +/* ================ Peripheral declaration ================ */ +/* ================================================================================ */ + +#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE) +#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE) +#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE) +#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE) +#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE) +#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE) +#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE) +#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE) +#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE) +#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE) +#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE) +#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE) +#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE) +#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE) +#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE) +#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE) +#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE) +#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE) +#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE) +#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE) +#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE) +#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE) +#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE) +#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE) +#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE) +#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE) +#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE) +#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE) +#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE) +#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE) +#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE) +#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE) +#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE) + + +/** @} */ /* End of group Device_Peripheral_Registers */ +/** @} */ /* End of group nRF51 */ +/** @} */ /* End of group Nordic Semiconductor */ + +#ifdef __cplusplus +} +#endif + +#endif /* nRF51_H */ diff --git a/cpu/nrf51822/include/nrf51_bitfields.h b/cpu/nrf51822/include/nrf51_bitfields.h index 25c9b5b88..8cd093765 100644 --- a/cpu/nrf51822/include/nrf51_bitfields.h +++ b/cpu/nrf51822/include/nrf51_bitfields.h @@ -1,6901 +1,6901 @@ -/* Copyright (c) 2013, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -#ifndef __NRF51_BITS_H -#define __NRF51_BITS_H - -/*lint ++flb "Enter library region */ - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* Peripheral: AAR */ -/* Description: Accelerated Address Resolver. */ - -/* Register: AAR_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ -#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on RESOLVED event. */ -#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: AAR_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ -#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on RESOLVED event. */ -#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: AAR_STATUS */ -/* Description: Resolution status. */ - -/* Bits 3..0 : The IRK used last time an address was resolved. */ -#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ - -/* Register: AAR_ENABLE */ -/* Description: Enable AAR. */ - -/* Bits 1..0 : Enable AAR. */ -#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ -#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ - -/* Register: AAR_NIRK */ -/* Description: Number of Identity root Keys in the IRK data structure. */ - -/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ -#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ -#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ - -/* Register: AAR_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: ADC */ -/* Description: Analog to digital converter. */ - -/* Register: ADC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ADC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on END event. */ -#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ADC_BUSY */ -/* Description: ADC busy register. */ - -/* Bit 0 : ADC busy register. */ -#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ -#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ -#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ -#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ - -/* Register: ADC_ENABLE */ -/* Description: ADC enable. */ - -/* Bits 1..0 : ADC enable. */ -#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ -#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ - -/* Register: ADC_CONFIG */ -/* Description: ADC configuration register. */ - -/* Bits 17..16 : ADC external reference pin selection. */ -#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ - -/* Bits 15..8 : ADC analog pin selection. */ -#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ -#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ - -/* Bits 6..5 : ADC reference selection. */ -#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ -#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ -#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ -#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ -#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ - -/* Bits 4..2 : ADC input selection. */ -#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ -#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ -#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ - -/* Bits 1..0 : ADC resolution. */ -#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ -#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ -#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ -#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ -#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ - -/* Register: ADC_RESULT */ -/* Description: Result of ADC conversion. */ - -/* Bits 9..0 : Result of ADC conversion. */ -#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ - -/* Register: ADC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: AMLI */ -/* Description: AHB Multi-Layer Interface. */ - -/* Register: AMLI_RAMPRI_CPU0 */ -/* Description: Configurable priority configuration register for CPU0. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_SPIS1 */ -/* Description: Configurable priority configuration register for SPIS1. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_RADIO */ -/* Description: Configurable priority configuration register for RADIO. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_ECB */ -/* Description: Configurable priority configuration register for ECB. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_CCM */ -/* Description: Configurable priority configuration register for CCM. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_AAR */ -/* Description: Configurable priority configuration register for AAR. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Peripheral: CCM */ -/* Description: AES CCM Mode Encryption. */ - -/* Register: CCM_SHORTS */ -/* Description: Shortcuts for the CCM. */ - -/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: CCM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ERROR event. */ -#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ENDCRYPT event. */ -#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDKSGEN event. */ -#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CCM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ERROR event. */ -#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ENDCRYPT event. */ -#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CCM_MICSTATUS */ -/* Description: CCM RX MIC check result. */ - -/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ -#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ -#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ - -/* Register: CCM_ENABLE */ -/* Description: CCM enable. */ - -/* Bits 1..0 : CCM enable. */ -#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ -#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ - -/* Register: CCM_MODE */ -/* Description: Operation mode. */ - -/* Bit 0 : CCM mode operation. */ -#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ -#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ - -/* Register: CCM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: CLOCK */ -/* Description: Clock control. */ - -/* Register: CLOCK_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 4 : Enable interrupt on CTTO event. */ -#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on DONE event. */ -#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CLOCK_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 4 : Disable interrupt on CTTO event. */ -#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on DONE event. */ -#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CLOCK_HFCLKRUN */ -/* Description: Task HFCLKSTART trigger status. */ - -/* Bit 0 : Task HFCLKSTART trigger status. */ -#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ -#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ - -/* Register: CLOCK_HFCLKSTAT */ -/* Description: High frequency clock status. */ - -/* Bit 16 : State for the HFCLK. */ -#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ -#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ - -/* Bit 0 : Active clock source for the HF clock. */ -#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ -#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ - -/* Register: CLOCK_LFCLKRUN */ -/* Description: Task LFCLKSTART triggered status. */ - -/* Bit 0 : Task LFCLKSTART triggered status. */ -#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ -#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ - -/* Register: CLOCK_LFCLKSTAT */ -/* Description: Low frequency clock status. */ - -/* Bit 16 : State for the LF clock. */ -#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ -#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ - -/* Bits 1..0 : Active clock source for the LF clock. */ -#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ - -/* Register: CLOCK_LFCLKSRCCOPY */ -/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ - -/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_LFCLKSRC */ -/* Description: Clock source for the LFCLK clock. */ - -/* Bits 1..0 : Clock source. */ -#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_CTIV */ -/* Description: Calibration timer interval. */ - -/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ -#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ -#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ - -/* Register: CLOCK_XTALFREQ */ -/* Description: Crystal frequency. */ - -/* Bits 7..0 : External Xtal frequency selection. */ -#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ -#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ - - -/* Peripheral: ECB */ -/* Description: AES ECB Mode Encryption. */ - -/* Register: ECB_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 1 : Enable interrupt on ERRORECB event. */ -#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDECB event. */ -#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ECB_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 1 : Disable interrupt on ERRORECB event. */ -#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDECB event. */ -#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ECB_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: FICR */ -/* Description: Factory Information Configuration. */ - -/* Register: FICR_RBD */ -/* Description: RBD. */ - -/* Bits 31..0 : RBD. */ -#define FICR_RBD_RBD_Pos (0UL) /*!< Position of RBD field. */ -#define FICR_RBD_RBD_Msk (0xFFFFFFFFUL << FICR_RBD_RBD_Pos) /*!< Bit mask of RBD field. */ -#define FICR_RBD_RBD_NoRoyalty (0xFFFFFFFEUL) /*!< No royalty. */ -#define FICR_RBD_RBD_Royalty (0xFFFFFFFFUL) /*!< Royalty. */ - -/* Register: FICR_PPFC */ -/* Description: Pre-programmed factory code present. */ - -/* Bits 7..0 : Pre-programmed factory code present. */ -#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ -#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ -#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ -#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ - -/* Register: FICR_CONFIGID */ -/* Description: Configuration identifier. */ - -/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ -#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ -#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ - -/* Bits 15..0 : Hardware Identification Number. */ -#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ -#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ - -/* Register: FICR_DEVICEADDRTYPE */ -/* Description: Device address type. */ - -/* Bit 0 : Device address type. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ - -/* Register: FICR_OVERRIDEEN */ -/* Description: Radio calibration override enable. */ - -/* Bit 3 : Override default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ - -/* Bit 0 : Override default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ - - -/* Peripheral: GPIO */ -/* Description: General purpose input and output. */ - -/* Register: GPIO_OUT */ -/* Description: Write GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ - -/* Register: GPIO_OUTSET */ -/* Description: Set individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ - -/* Register: GPIO_OUTCLR */ -/* Description: Clear individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ - -/* Register: GPIO_IN */ -/* Description: Read GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ - -/* Register: GPIO_DIR */ -/* Description: Direction of GPIO pins. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ - -/* Register: GPIO_DIRSET */ -/* Description: DIR set register. */ - -/* Bit 31 : Set as output pin 31. */ -#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ - -/* Bit 30 : Set as output pin 30. */ -#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ - -/* Bit 29 : Set as output pin 29. */ -#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ - -/* Bit 28 : Set as output pin 28. */ -#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ - -/* Bit 27 : Set as output pin 27. */ -#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ - -/* Bit 26 : Set as output pin 26. */ -#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ - -/* Bit 25 : Set as output pin 25. */ -#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ - -/* Bit 24 : Set as output pin 24. */ -#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ - -/* Bit 23 : Set as output pin 23. */ -#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ - -/* Bit 22 : Set as output pin 22. */ -#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ - -/* Bit 21 : Set as output pin 21. */ -#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ - -/* Bit 20 : Set as output pin 20. */ -#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ - -/* Bit 19 : Set as output pin 19. */ -#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ - -/* Bit 18 : Set as output pin 18. */ -#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ - -/* Bit 17 : Set as output pin 17. */ -#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ - -/* Bit 16 : Set as output pin 16. */ -#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ - -/* Bit 15 : Set as output pin 15. */ -#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ - -/* Bit 14 : Set as output pin 14. */ -#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ - -/* Bit 13 : Set as output pin 13. */ -#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ - -/* Bit 12 : Set as output pin 12. */ -#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ - -/* Bit 11 : Set as output pin 11. */ -#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ - -/* Bit 10 : Set as output pin 10. */ -#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ - -/* Bit 9 : Set as output pin 9. */ -#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ - -/* Bit 8 : Set as output pin 8. */ -#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ - -/* Bit 7 : Set as output pin 7. */ -#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ - -/* Bit 6 : Set as output pin 6. */ -#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ - -/* Bit 5 : Set as output pin 5. */ -#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ - -/* Bit 4 : Set as output pin 4. */ -#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ - -/* Bit 3 : Set as output pin 3. */ -#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ - -/* Bit 2 : Set as output pin 2. */ -#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ - -/* Bit 1 : Set as output pin 1. */ -#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ - -/* Bit 0 : Set as output pin 0. */ -#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ - -/* Register: GPIO_DIRCLR */ -/* Description: DIR clear register. */ - -/* Bit 31 : Set as input pin 31. */ -#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 30 : Set as input pin 30. */ -#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 29 : Set as input pin 29. */ -#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 28 : Set as input pin 28. */ -#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 27 : Set as input pin 27. */ -#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 26 : Set as input pin 26. */ -#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 25 : Set as input pin 25. */ -#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 24 : Set as input pin 24. */ -#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 23 : Set as input pin 23. */ -#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 22 : Set as input pin 22. */ -#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 21 : Set as input pin 21. */ -#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 20 : Set as input pin 20. */ -#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 19 : Set as input pin 19. */ -#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 18 : Set as input pin 18. */ -#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 17 : Set as input pin 17. */ -#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 16 : Set as input pin 16. */ -#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 15 : Set as input pin 15. */ -#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 14 : Set as input pin 14. */ -#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 13 : Set as input pin 13. */ -#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 12 : Set as input pin 12. */ -#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 11 : Set as input pin 11. */ -#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 10 : Set as input pin 10. */ -#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 9 : Set as input pin 9. */ -#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 8 : Set as input pin 8. */ -#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 7 : Set as input pin 7. */ -#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 6 : Set as input pin 6. */ -#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 5 : Set as input pin 5. */ -#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 4 : Set as input pin 4. */ -#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 3 : Set as input pin 3. */ -#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 2 : Set as input pin 2. */ -#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 1 : Set as input pin 1. */ -#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 0 : Set as input pin 0. */ -#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ - -/* Register: GPIO_PIN_CNF */ -/* Description: Configuration of GPIO pins. */ - -/* Bits 17..16 : Pin sensing mechanism. */ -#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ -#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ - -/* Bits 10..8 : Drive configuration. */ -#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ - -/* Bits 3..2 : Pull-up or -down configuration. */ -#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ -#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ -#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ -#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ -#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ - -/* Bit 1 : Connect or disconnect input path. */ -#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ -#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ - -/* Bit 0 : Pin direction. */ -#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ -#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ -#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ -#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ - - -/* Peripheral: GPIOTE */ -/* Description: GPIO tasks and events. */ - -/* Register: GPIOTE_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 31 : Enable interrupt on PORT event. */ -#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on IN[3] event. */ -#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on IN[2] event. */ -#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on IN[1] event. */ -#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on IN[0] event. */ -#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: GPIOTE_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 31 : Disable interrupt on PORT event. */ -#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on IN[3] event. */ -#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on IN[2] event. */ -#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on IN[1] event. */ -#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on IN[0] event. */ -#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: GPIOTE_CONFIG */ -/* Description: Channel configuration registers. */ - -/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ -#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ -#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ - -/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ -#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ -#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ -#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ - -/* Bits 12..8 : Pin select. */ -#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ - -/* Bits 1..0 : Mode */ -#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ -#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ -#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ - -/* Register: GPIOTE_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: LPCOMP */ -/* Description: Low power comparator. */ - -/* Register: LPCOMP_SHORTS */ -/* Description: Shortcuts for the LPCOMP. */ - -/* Bit 4 : Shortcut between CROSS event and STOP task. */ -#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between UP event and STOP task. */ -#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DOWN event and STOP task. */ -#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between RADY event and STOP task. */ -#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and SAMPLE task. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: LPCOMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 3 : Enable interrupt on CROSS event. */ -#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on UP event. */ -#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on DOWN event. */ -#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: LPCOMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 3 : Disable interrupt on CROSS event. */ -#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on UP event. */ -#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on DOWN event. */ -#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: LPCOMP_RESULT */ -/* Description: Result of last compare. */ - -/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ -#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ -#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ - -/* Register: LPCOMP_ENABLE */ -/* Description: Enable the LPCOMP. */ - -/* Bits 1..0 : Enable or disable LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ - -/* Register: LPCOMP_PSEL */ -/* Description: Input pin select. */ - -/* Bits 2..0 : Analog input pin select. */ -#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ -#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ - -/* Register: LPCOMP_REFSEL */ -/* Description: Reference select. */ - -/* Bits 2..0 : Reference select. */ -#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ - -/* Register: LPCOMP_EXTREFSEL */ -/* Description: External reference select. */ - -/* Bit 0 : External analog reference pin selection. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ - -/* Register: LPCOMP_ANADETECT */ -/* Description: Analog detect configuration. */ - -/* Bits 1..0 : Analog detect configuration. */ -#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ -#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ -#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ - -/* Register: LPCOMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: MPU */ -/* Description: Memory Protection Unit. */ - -/* Register: MPU_PERR0 */ -/* Description: Configuration of peripherals in mpu regions. */ - -/* Bit 31 : PPI region configuration. */ -#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ -#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ -#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 30 : NVMC region configuration. */ -#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ -#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ -#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 19 : LPCOMP region configuration. */ -#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 18 : QDEC region configuration. */ -#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ -#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ -#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 17 : RTC1 region configuration. */ -#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ -#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ -#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 16 : WDT region configuration. */ -#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ -#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ -#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 15 : CCM and AAR region configuration. */ -#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 14 : ECB region configuration. */ -#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ -#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ -#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 13 : RNG region configuration. */ -#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ -#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ -#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 12 : TEMP region configuration. */ -#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ -#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ -#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 11 : RTC0 region configuration. */ -#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ -#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ -#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 10 : TIMER2 region configuration. */ -#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ -#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ -#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 9 : TIMER1 region configuration. */ -#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ -#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ -#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 8 : TIMER0 region configuration. */ -#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ -#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ -#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 7 : ADC region configuration. */ -#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ -#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ -#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 6 : GPIOTE region configuration. */ -#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 4 : SPI1 and TWI1 region configuration. */ -#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 3 : SPI0 and TWI0 region configuration. */ -#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 2 : UART0 region configuration. */ -#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ -#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ -#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 1 : RADIO region configuration. */ -#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ -#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ -#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 0 : POWER_CLOCK region configuration. */ -#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Register: MPU_PROTENSET0 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 31. */ -#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 30. */ -#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 29. */ -#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 28. */ -#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 27. */ -#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 26. */ -#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 25. */ -#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 24. */ -#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 23. */ -#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 22. */ -#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 21. */ -#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 20. */ -#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 19. */ -#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 18. */ -#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 17. */ -#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 16. */ -#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 15. */ -#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 14. */ -#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 13. */ -#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 12. */ -#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 11. */ -#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 10. */ -#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 9. */ -#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 8. */ -#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 7. */ -#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 6. */ -#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 5. */ -#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 4. */ -#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 3. */ -#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 2. */ -#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 1. */ -#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 0. */ -#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_PROTENSET1 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 63. */ -#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 62. */ -#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 61. */ -#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 60. */ -#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 59. */ -#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 58. */ -#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 57. */ -#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 56. */ -#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 55. */ -#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 54. */ -#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 53. */ -#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 52. */ -#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 51. */ -#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 50. */ -#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 49. */ -#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 48. */ -#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 47. */ -#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 46. */ -#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 45. */ -#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 44. */ -#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 43. */ -#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 42. */ -#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 41. */ -#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 40. */ -#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 39. */ -#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 38. */ -#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 37. */ -#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 36. */ -#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 35. */ -#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 34. */ -#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 33. */ -#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 32. */ -#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_DISABLEINDEBUG */ -/* Description: Disable erase and write protection mechanism in debug mode. */ - -/* Bit 0 : Disable protection mechanism in debug mode. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ - -/* Register: MPU_PROTBLOCKSIZE */ -/* Description: Erase and write protection block size. */ - -/* Bits 1..0 : Erase and write protection block size. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ - -/* Register: MPU_ENRBDREG */ -/* Description: Enable or disable RBD. */ - -/* Bit 0 : Enable or disable RBD. */ -#define MPU_ENRBDREG_ENRBDREG_Pos (0UL) /*!< Position of ENRBDREG field. */ -#define MPU_ENRBDREG_ENRBDREG_Msk (0x1UL << MPU_ENRBDREG_ENRBDREG_Pos) /*!< Bit mask of ENRBDREG field. */ -#define MPU_ENRBDREG_ENRBDREG_Disabled (0UL) /*!< RBD disabled. */ -#define MPU_ENRBDREG_ENRBDREG_Enabled (1UL) /*!< RBD enabled. */ - - -/* Peripheral: NVMC */ -/* Description: Non Volatile Memory Controller. */ - -/* Register: NVMC_READY */ -/* Description: Ready flag. */ - -/* Bit 0 : NVMC ready. */ -#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ -#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ -#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ -#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ - -/* Register: NVMC_CONFIG */ -/* Description: Configuration register. */ - -/* Bits 1..0 : Program write enable. */ -#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ -#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ -#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ -#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ -#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ - -/* Register: NVMC_ERASEALL */ -/* Description: Register for erasing all non-volatile user memory. */ - -/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ -#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ - -/* Register: NVMC_ERASEUICR */ -/* Description: Register for start erasing User Information Congfiguration Registers. */ - -/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ -#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ - - -/* Peripheral: POWER */ -/* Description: Power Control. */ - -/* Register: POWER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on POFWARN event. */ -#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: POWER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on POFWARN event. */ -#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: POWER_RESETREAS */ -/* Description: Reset reason. */ - -/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ -#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ -#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ - -/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ -#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ - -/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ -#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ -#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ - -/* Bit 3 : Reset from CPU lock-up detected. */ -#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ - -/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ -#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ -#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ - -/* Bit 1 : Reset from watchdog detected. */ -#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ -#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ - -/* Bit 0 : Reset from pin-reset detected. */ -#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ - -/* Register: POWER_RAMSTATUS */ -/* Description: Ram status register. */ - -/* Bit 3 : RAM block 3 status. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ - -/* Bit 2 : RAM block 2 status. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ - -/* Bit 1 : RAM block 1 status. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ - -/* Bit 0 : RAM block 0 status. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ - -/* Register: POWER_SYSTEMOFF */ -/* Description: System off register. */ - -/* Bit 0 : Enter system off mode. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ - -/* Register: POWER_POFCON */ -/* Description: Power failure configuration. */ - -/* Bits 2..1 : Set threshold level. */ -#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ -#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ -#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ -#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ - -/* Bit 0 : Power failure comparator enable. */ -#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ -#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ -#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ -#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ - -/* Register: POWER_GPREGRET */ -/* Description: General purpose retention register. This register is a retained register. */ - -/* Bits 7..0 : General purpose retention register. */ -#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ -#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ - -/* Register: POWER_RAMON */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 1 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ - -/* Bit 16 : RAM block 0 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ - -/* Bit 1 : RAM block 1 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ -#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ - -/* Bit 0 : RAM block 0 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ -#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ - -/* Register: POWER_RESET */ -/* Description: Pin reset functionality configuration register. This register is a retained register. */ - -/* Bit 0 : Enable or disable pin reset in debug interface mode. */ -#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ -#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ -#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ -#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ - -/* Register: POWER_RAMONB */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 3 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ - -/* Bit 16 : RAM block 2 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ - -/* Bit 1 : RAM block 3 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ - -/* Bit 0 : RAM block 2 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ - -/* Register: POWER_DCDCEN */ -/* Description: DCDC converter enable configuration register. */ - -/* Bit 0 : Enable DCDC converter. */ -#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ -#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ - -/* Register: POWER_DCDCFORCE */ -/* Description: DCDC power-up force register. */ - -/* Bit 1 : DCDC power-up force on. */ -#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ - -/* Bit 0 : DCDC power-up force off. */ -#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ - - -/* Peripheral: PPI */ -/* Description: PPI controller. */ - -/* Register: PPI_CHEN */ -/* Description: Channel enable. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ -#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ - -/* Register: PPI_CHENSET */ -/* Description: Channel enable set. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ - -/* Register: PPI_CHENCLR */ -/* Description: Channel enable clear. */ - -/* Bit 31 : Disable PPI channel 31. */ -#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 30 : Disable PPI channel 30. */ -#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 29 : Disable PPI channel 29. */ -#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 28 : Disable PPI channel 28. */ -#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 27 : Disable PPI channel 27. */ -#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 26 : Disable PPI channel 26. */ -#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 25 : Disable PPI channel 25. */ -#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 24 : Disable PPI channel 24. */ -#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 23 : Disable PPI channel 23. */ -#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 22 : Disable PPI channel 22. */ -#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 21 : Disable PPI channel 21. */ -#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 20 : Disable PPI channel 20. */ -#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 15 : Disable PPI channel 15. */ -#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 14 : Disable PPI channel 14. */ -#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 13 : Disable PPI channel 13. */ -#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 12 : Disable PPI channel 12. */ -#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 11 : Disable PPI channel 11. */ -#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 10 : Disable PPI channel 10. */ -#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 9 : Disable PPI channel 9. */ -#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 8 : Disable PPI channel 8. */ -#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 7 : Disable PPI channel 7. */ -#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 6 : Disable PPI channel 6. */ -#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 5 : Disable PPI channel 5. */ -#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 4 : Disable PPI channel 4. */ -#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 3 : Disable PPI channel 3. */ -#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 2 : Disable PPI channel 2. */ -#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 1 : Disable PPI channel 1. */ -#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 0 : Disable PPI channel 0. */ -#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ - -/* Register: PPI_CHG */ -/* Description: Channel group configuration. */ - -/* Bit 31 : Include CH31 in channel group. */ -#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ - -/* Bit 30 : Include CH30 in channel group. */ -#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ - -/* Bit 29 : Include CH29 in channel group. */ -#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ - -/* Bit 28 : Include CH28 in channel group. */ -#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ - -/* Bit 27 : Include CH27 in channel group. */ -#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ - -/* Bit 26 : Include CH26 in channel group. */ -#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ - -/* Bit 25 : Include CH25 in channel group. */ -#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ - -/* Bit 24 : Include CH24 in channel group. */ -#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ - -/* Bit 23 : Include CH23 in channel group. */ -#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ - -/* Bit 22 : Include CH22 in channel group. */ -#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ - -/* Bit 21 : Include CH21 in channel group. */ -#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ - -/* Bit 20 : Include CH20 in channel group. */ -#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ - -/* Bit 15 : Include CH15 in channel group. */ -#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ - -/* Bit 14 : Include CH14 in channel group. */ -#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ - -/* Bit 13 : Include CH13 in channel group. */ -#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ - -/* Bit 12 : Include CH12 in channel group. */ -#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ - -/* Bit 11 : Include CH11 in channel group. */ -#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ - -/* Bit 10 : Include CH10 in channel group. */ -#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ - -/* Bit 9 : Include CH9 in channel group. */ -#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ - -/* Bit 8 : Include CH8 in channel group. */ -#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ - -/* Bit 7 : Include CH7 in channel group. */ -#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ - -/* Bit 6 : Include CH6 in channel group. */ -#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ - -/* Bit 5 : Include CH5 in channel group. */ -#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ - -/* Bit 4 : Include CH4 in channel group. */ -#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ - -/* Bit 3 : Include CH3 in channel group. */ -#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ - -/* Bit 2 : Include CH2 in channel group. */ -#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ - -/* Bit 1 : Include CH1 in channel group. */ -#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ - -/* Bit 0 : Include CH0 in channel group. */ -#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ - - -/* Peripheral: PU */ -/* Description: Patch unit. */ - -/* Register: PU_PATCHADDR */ -/* Description: Relative address of patch instructions. */ - -/* Bits 24..0 : Relative address of patch instructions. */ -#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ -#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ - -/* Register: PU_PATCHEN */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ - -/* Register: PU_PATCHENSET */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ - -/* Register: PU_PATCHENCLR */ -/* Description: Patch disable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ - - -/* Peripheral: QDEC */ -/* Description: Rotary decoder. */ - -/* Register: QDEC_SHORTS */ -/* Description: Shortcuts for the QDEC. */ - -/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: QDEC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ACCOF event. */ -#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on REPORTRDY event. */ -#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on SAMPLERDY event. */ -#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: QDEC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ACCOF event. */ -#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on REPORTRDY event. */ -#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on SAMPLERDY event. */ -#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: QDEC_ENABLE */ -/* Description: Enable the QDEC. */ - -/* Bit 0 : Enable or disable QDEC. */ -#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ -#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ - -/* Register: QDEC_LEDPOL */ -/* Description: LED output pin polarity. */ - -/* Bit 0 : LED output pin polarity. */ -#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ -#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ - -/* Register: QDEC_SAMPLEPER */ -/* Description: Sample period. */ - -/* Bits 2..0 : Sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ - -/* Register: QDEC_SAMPLE */ -/* Description: Motion sample value. */ - -/* Bits 31..0 : Last sample taken in compliment to 2. */ -#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ -#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ - -/* Register: QDEC_REPORTPER */ -/* Description: Number of samples to generate an EVENT_REPORTRDY. */ - -/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ -#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ - -/* Register: QDEC_DBFEN */ -/* Description: Enable debouncer input filters. */ - -/* Bit 0 : Enable debounce input filters. */ -#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ -#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ - -/* Register: QDEC_LEDPRE */ -/* Description: Time LED is switched ON before the sample. */ - -/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ -#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ -#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ - -/* Register: QDEC_ACCDBL */ -/* Description: Accumulated double (error) transitions register. */ - -/* Bits 3..0 : Accumulated double (error) transitions. */ -#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ -#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ - -/* Register: QDEC_ACCDBLREAD */ -/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ - -/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ - -/* Register: QDEC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RADIO */ -/* Description: The radio. */ - -/* Register: RADIO_SHORTS */ -/* Description: Shortcuts for the radio. */ - -/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 5 : Shortcut between END event and START task. */ -#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ -#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ -#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ -#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between END event and DISABLE task. */ -#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and START task. */ -#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ -#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ -#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RADIO_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on BCMATCH event. */ -#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on RSSIEND event. */ -#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on DEVMISS event. */ -#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 5 : Enable interrupt on DEVMATCH event. */ -#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on DISABLED event. */ -#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on END event. */ -#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on PAYLOAD event. */ -#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ADDRESS event. */ -#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RADIO_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on BCMATCH event. */ -#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on RSSIEND event. */ -#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on DEVMISS event. */ -#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 5 : Disable interrupt on DEVMATCH event. */ -#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on DISABLED event. */ -#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on END event. */ -#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on PAYLOAD event. */ -#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ADDRESS event. */ -#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RADIO_CRCSTATUS */ -/* Description: CRC status of received packet. */ - -/* Bit 0 : CRC status of received packet. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ - -/* Register: RADIO_CD */ -/* Description: Carrier detect. */ - -/* Bit 0 : Carrier detect. */ -#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ -#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ - -/* Register: RADIO_RXMATCH */ -/* Description: Received address. */ - -/* Bits 2..0 : Logical address in which previous packet was received. */ -#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ -#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ - -/* Register: RADIO_RXCRC */ -/* Description: Received CRC. */ - -/* Bits 23..0 : CRC field of previously received packet. */ -#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ -#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ - -/* Register: RADIO_DAI */ -/* Description: Device address match index. */ - -/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ -#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ -#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ - -/* Register: RADIO_FREQUENCY */ -/* Description: Frequency. */ - -/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ -#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ - -/* Register: RADIO_TXPOWER */ -/* Description: Output power. */ - -/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ -#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ -#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ - -/* Register: RADIO_MODE */ -/* Description: Data rate and modulation. */ - -/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ -#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ - -/* Register: RADIO_PCNF0 */ -/* Description: Packet configuration 0. */ - -/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ -#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ - -/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ -#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ -#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ - -/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ -#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ - -/* Register: RADIO_PCNF1 */ -/* Description: Packet configuration 1. */ - -/* Bit 25 : Packet whitening enable. */ -#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ -#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ - -/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ -#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ -#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ - -/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ -#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ - -/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ -#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ - -/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ -#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ -#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ - -/* Register: RADIO_PREFIX0 */ -/* Description: Prefixes bytes for logical addresses 0 to 3. */ - -/* Bits 31..24 : Address prefix 3. Decision point: START task. */ -#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ -#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ - -/* Bits 23..16 : Address prefix 2. Decision point: START task. */ -#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ -#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ - -/* Bits 15..8 : Address prefix 1. Decision point: START task. */ -#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ -#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ - -/* Bits 7..0 : Address prefix 0. Decision point: START task. */ -#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ -#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ - -/* Register: RADIO_PREFIX1 */ -/* Description: Prefixes bytes for logical addresses 4 to 7. */ - -/* Bits 31..24 : Address prefix 7. Decision point: START task. */ -#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ -#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ - -/* Bits 23..16 : Address prefix 6. Decision point: START task. */ -#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ -#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ - -/* Bits 15..8 : Address prefix 5. Decision point: START task. */ -#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ -#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ - -/* Bits 7..0 : Address prefix 4. Decision point: START task. */ -#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ -#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ - -/* Register: RADIO_TXADDRESS */ -/* Description: Transmit address select. */ - -/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ -#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ -#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ - -/* Register: RADIO_RXADDRESSES */ -/* Description: Receive address select. */ - -/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ - -/* Register: RADIO_CRCCNF */ -/* Description: CRC configuration. */ - -/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ -#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ -#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ - -/* Bits 1..0 : CRC length. Decision point: START task. */ -#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ -#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ -#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ -#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ -#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ -#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ - -/* Register: RADIO_CRCPOLY */ -/* Description: CRC polynomial. */ - -/* Bits 23..0 : CRC polynomial. Decision point: START task. */ -#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ -#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ - -/* Register: RADIO_CRCINIT */ -/* Description: CRC initial value. */ - -/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ -#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ -#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ - -/* Register: RADIO_TEST */ -/* Description: Test features enable register. */ - -/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ -#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ -#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ - -/* Bit 0 : Constant carrier. Decision point: TXEN task. */ -#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ -#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ - -/* Register: RADIO_TIFS */ -/* Description: Inter Frame Spacing in microseconds. */ - -/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ -#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ -#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ - -/* Register: RADIO_RSSISAMPLE */ -/* Description: RSSI sample. */ - -/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ - -/* Register: RADIO_STATE */ -/* Description: Current radio state. */ - -/* Bits 3..0 : Current radio state. */ -#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ -#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ -#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ -#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ -#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ -#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ -#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ -#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ -#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ -#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ -#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ - -/* Register: RADIO_DATAWHITEIV */ -/* Description: Data whitening initial value. */ - -/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ - -/* Register: RADIO_DAP */ -/* Description: Device address prefix. */ - -/* Bits 15..0 : Device address prefix. */ -#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ -#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ - -/* Register: RADIO_DACNF */ -/* Description: Device address match configuration. */ - -/* Bit 15 : TxAdd for device address 7. */ -#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ -#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ - -/* Bit 14 : TxAdd for device address 6. */ -#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ -#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ - -/* Bit 13 : TxAdd for device address 5. */ -#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ -#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ - -/* Bit 12 : TxAdd for device address 4. */ -#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ -#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ - -/* Bit 11 : TxAdd for device address 3. */ -#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ -#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ - -/* Bit 10 : TxAdd for device address 2. */ -#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ -#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ - -/* Bit 9 : TxAdd for device address 1. */ -#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ -#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ - -/* Bit 8 : TxAdd for device address 0. */ -#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ -#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ - -/* Bit 7 : Enable or disable device address matching using device address 7. */ -#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ -#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ -#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ - -/* Bit 6 : Enable or disable device address matching using device address 6. */ -#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ -#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ -#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ - -/* Bit 5 : Enable or disable device address matching using device address 5. */ -#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ -#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ -#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ - -/* Bit 4 : Enable or disable device address matching using device address 4. */ -#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ -#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ -#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ - -/* Bit 3 : Enable or disable device address matching using device address 3. */ -#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ -#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ -#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ - -/* Bit 2 : Enable or disable device address matching using device address 2. */ -#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ -#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ -#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ - -/* Bit 1 : Enable or disable device address matching using device address 1. */ -#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ -#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ -#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ - -/* Bit 0 : Enable or disable device address matching using device address 0. */ -#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ -#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ -#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ - -/* Register: RADIO_OVERRIDE0 */ -/* Description: Trim value override register 0. */ - -/* Bits 31..0 : Trim value override 0. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ - -/* Register: RADIO_OVERRIDE1 */ -/* Description: Trim value override register 1. */ - -/* Bits 31..0 : Trim value override 1. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ - -/* Register: RADIO_OVERRIDE2 */ -/* Description: Trim value override register 2. */ - -/* Bits 31..0 : Trim value override 2. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ - -/* Register: RADIO_OVERRIDE3 */ -/* Description: Trim value override register 3. */ - -/* Bits 31..0 : Trim value override 3. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ - -/* Register: RADIO_OVERRIDE4 */ -/* Description: Trim value override register 4. */ - -/* Bit 31 : Enable or disable override of default trim values. */ -#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ -#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ - -/* Bits 27..0 : Trim value override 4. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ - -/* Register: RADIO_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RNG */ -/* Description: Random Number Generator. */ - -/* Register: RNG_SHORTS */ -/* Description: Shortcuts for the RNG. */ - -/* Bit 0 : Shortcut between VALRDY event and STOP task. */ -#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RNG_INTENSET */ -/* Description: Interrupt enable set register */ - -/* Bit 0 : Enable interrupt on VALRDY event. */ -#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RNG_INTENCLR */ -/* Description: Interrupt enable clear register */ - -/* Bit 0 : Disable interrupt on VALRDY event. */ -#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RNG_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 0 : Digital error correction enable. */ -#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ -#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ - -/* Register: RNG_VALUE */ -/* Description: RNG random number. */ - -/* Bits 7..0 : Generated random number. */ -#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ -#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ - -/* Register: RNG_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RTC */ -/* Description: Real time counter 0. */ - -/* Register: RTC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] event. */ -#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] event. */ -#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] event. */ -#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] event. */ -#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on OVRFLW event. */ -#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on TICK event. */ -#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RTC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] event. */ -#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] event. */ -#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] event. */ -#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] event. */ -#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on OVRFLW event. */ -#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on TICK event. */ -#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RTC_EVTEN */ -/* Description: Configures event enable routing to PPI for each RTC event. */ - -/* Bit 19 : COMPARE[3] event enable. */ -#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 18 : COMPARE[2] event enable. */ -#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 17 : COMPARE[1] event enable. */ -#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 16 : COMPARE[0] event enable. */ -#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 1 : OVRFLW event enable. */ -#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 0 : TICK event enable. */ -#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ - -/* Register: RTC_EVTENSET */ -/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ - -/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ - -/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ - -/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ - -/* Bit 1 : Enable routing to PPI of OVRFLW event. */ -#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ - -/* Bit 0 : Enable routing to PPI of TICK event. */ -#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ - -/* Register: RTC_EVTENCLR */ -/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 1 : Disable routing to PPI of OVRFLW event. */ -#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 0 : Disable routing to PPI of TICK event. */ -#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ - -/* Register: RTC_COUNTER */ -/* Description: Current COUNTER value. */ - -/* Bits 23..0 : Counter value. */ -#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ -#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ - -/* Register: RTC_PRESCALER */ -/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ - -/* Bits 11..0 : RTC PRESCALER value. */ -#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: RTC_CC */ -/* Description: Capture/compare registers. */ - -/* Bits 23..0 : Compare value. */ -#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ -#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ - -/* Register: RTC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPI */ -/* Description: SPI master 0. */ - -/* Register: SPI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on READY event. */ -#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPI_ENABLE */ -/* Description: Enable SPI. */ - -/* Bits 2..0 : Enable or disable SPI. */ -#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ -#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ - -/* Register: SPI_RXD */ -/* Description: RX data. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: SPI_TXD */ -/* Description: TX data. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: SPI_FREQUENCY */ -/* Description: SPI frequency */ - -/* Bits 31..0 : SPI data rate. */ -#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ -#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ - -/* Register: SPI_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIS */ -/* Description: SPI slave 1. */ - -/* Register: SPIS_SHORTS */ -/* Description: Shortcuts for SPIS. */ - -/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ -#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIS_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on ACQUIRED event. */ -#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on END event. */ -#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIS_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on ACQUIRED event. */ -#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on END event. */ -#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIS_SEMSTAT */ -/* Description: Semaphore status. */ - -/* Bits 1..0 : Semaphore status. */ -#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ -#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ -#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ -#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ - -/* Register: SPIS_STATUS */ -/* Description: Status from last transaction. */ - -/* Bit 1 : RX buffer overflow detected, and prevented. */ -#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ - -/* Bit 0 : TX buffer overread detected, and prevented. */ -#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ - -/* Register: SPIS_ENABLE */ -/* Description: Enable SPIS. */ - -/* Bits 2..0 : Enable or disable SPIS. */ -#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ -#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ - -/* Register: SPIS_MAXRX */ -/* Description: Maximum number of bytes in the receive buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ -#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ -#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ - -/* Register: SPIS_AMOUNTRX */ -/* Description: Number of bytes received in last granted transaction. */ - -/* Bits 7..0 : Number of bytes received in last granted transaction. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ - -/* Register: SPIS_MAXTX */ -/* Description: Maximum number of bytes in the transmit buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ -#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ -#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ - -/* Register: SPIS_AMOUNTTX */ -/* Description: Number of bytes transmitted in last granted transaction. */ - -/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ - -/* Register: SPIS_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIS_DEF */ -/* Description: Default character. */ - -/* Bits 7..0 : Default character. */ -#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ -#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ - -/* Register: SPIS_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIS_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TEMP */ -/* Description: Temperature Sensor. */ - -/* Register: TEMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on DATARDY event. */ -#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TEMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on DATARDY event. */ -#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TEMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TIMER */ -/* Description: Timer 0. */ - -/* Register: TIMER_SHORTS */ -/* Description: Shortcuts for Timer. */ - -/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TIMER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] */ -#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] */ -#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] */ -#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] */ -#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TIMER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] */ -#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] */ -#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] */ -#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] */ -#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TIMER_MODE */ -/* Description: Timer Mode selection. */ - -/* Bit 0 : Select Normal or Counter mode. */ -#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ -#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ - -/* Register: TIMER_BITMODE */ -/* Description: Sets timer behaviour. */ - -/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ -#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ - -/* Register: TIMER_PRESCALER */ -/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ - -/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ -#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: TIMER_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TWI */ -/* Description: Two-wire interface master 0. */ - -/* Register: TWI_SHORTS */ -/* Description: Shortcuts for TWI. */ - -/* Bit 1 : Shortcut between BB event and the STOP task. */ -#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ -#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TWI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 18 : Enable interrupt on SUSPENDED event. */ -#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 14 : Enable interrupt on BB event. */ -#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXDSENT event. */ -#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TWI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 18 : Disable interrupt on SUSPENDED event. */ -#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 14 : Disable interrupt on BB event. */ -#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXDSENT event. */ -#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXDREADY event. */ -#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TWI_ERRORSRC */ -/* Description: Two-wire error source. Write error field to 1 to clear error. */ - -/* Bit 2 : NACK received after sending a data byte. */ -#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ -#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ -#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : NACK received after sending the address. */ -#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ -#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ -#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ - -/* Register: TWI_ENABLE */ -/* Description: Enable two-wire master. */ - -/* Bits 2..0 : Enable or disable W2M */ -#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ -#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ - -/* Register: TWI_RXD */ -/* Description: RX data register. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: TWI_TXD */ -/* Description: TX data register. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: TWI_FREQUENCY */ -/* Description: Two-wire frequency. */ - -/* Bits 31..0 : Two-wire master clock frequency. */ -#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ - -/* Register: TWI_ADDRESS */ -/* Description: Address used in the two-wire transfer. */ - -/* Bits 6..0 : Two-wire address. */ -#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ -#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ - -/* Register: TWI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UART */ -/* Description: Universal Asynchronous Receiver/Transmitter. */ - -/* Register: UART_SHORTS */ -/* Description: Shortcuts for UART. */ - -/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ -#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ -#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: UART_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 17 : Enable interrupt on RXTO event. */ -#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXRDY event. */ -#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on RXRDY event. */ -#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on NCTS event. */ -#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on CTS event. */ -#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: UART_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 17 : Disable interrupt on RXTO event. */ -#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXRDY event. */ -#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXRDY event. */ -#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on NCTS event. */ -#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on CTS event. */ -#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: UART_ERRORSRC */ -/* Description: Error source. Write error field to 1 to clear error. */ - -/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ -#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ -#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ -#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ -#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ -#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ -#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: UART_ENABLE */ -/* Description: Enable UART and acquire IOs. */ - -/* Bits 2..0 : Enable or disable UART and acquire IOs. */ -#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ -#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ - -/* Register: UART_RXD */ -/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consummed. If read when no character available, the UART will stop working. */ - -/* Bits 7..0 : RX data from previous transfer. Double buffered. */ -#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: UART_TXD */ -/* Description: TXD register. */ - -/* Bits 7..0 : TX data for transfer. */ -#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: UART_BAUDRATE */ -/* Description: UART Baudrate. */ - -/* Bits 31..0 : UART baudrate. */ -#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ - -/* Register: UART_CONFIG */ -/* Description: Configuration of parity and hardware flow control register. */ - -/* Bits 3..1 : Include parity bit. */ -#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ -#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ - -/* Bit 0 : Hardware flow control. */ -#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ -#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ -#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ -#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ - -/* Register: UART_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UICR */ -/* Description: User Information Configuration. */ - -/* Register: UICR_RBPCONF */ -/* Description: Readback protection configuration. */ - -/* Bits 15..8 : Readback protect all code in the device. */ -#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ -#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ -#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ -#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ - -/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ -#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ -#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ -#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ -#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ - -/* Register: UICR_XTALFREQ */ -/* Description: Reset value for CLOCK XTALFREQ register. */ - -/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ -#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ -#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ - -/* Register: UICR_FWID */ -/* Description: Firmware ID. */ - -/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ -#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ -#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ - - -/* Peripheral: WDT */ -/* Description: Watchdog Timer. */ - -/* Register: WDT_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on TIMEOUT event. */ -#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: WDT_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on TIMEOUT event. */ -#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: WDT_RUNSTATUS */ -/* Description: Watchdog running status. */ - -/* Bit 0 : Watchdog running status. */ -#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ -#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ - -/* Register: WDT_REQSTATUS */ -/* Description: Request status. */ - -/* Bit 7 : Request status for RR[7]. */ -#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ - -/* Bit 6 : Request status for RR[6]. */ -#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ - -/* Bit 5 : Request status for RR[5]. */ -#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ - -/* Bit 4 : Request status for RR[4]. */ -#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ - -/* Bit 3 : Request status for RR[3]. */ -#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ - -/* Bit 2 : Request status for RR[2]. */ -#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ - -/* Bit 1 : Request status for RR[1]. */ -#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ - -/* Bit 0 : Request status for RR[0]. */ -#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ - -/* Register: WDT_RREN */ -/* Description: Reload request enable. */ - -/* Bit 7 : Enable or disable RR[7] register. */ -#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ -#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ - -/* Bit 6 : Enable or disable RR[6] register. */ -#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ -#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ - -/* Bit 5 : Enable or disable RR[5] register. */ -#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ -#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ - -/* Bit 4 : Enable or disable RR[4] register. */ -#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ -#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ - -/* Bit 3 : Enable or disable RR[3] register. */ -#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ -#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ - -/* Bit 2 : Enable or disable RR[2] register. */ -#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ -#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ - -/* Bit 1 : Enable or disable RR[1] register. */ -#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ -#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ - -/* Bit 0 : Enable or disable RR[0] register. */ -#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ -#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ - -/* Register: WDT_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ -#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ -#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ - -/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ -#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ -#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ - -/* Register: WDT_RR */ -/* Description: Reload requests registers. */ - -/* Bits 31..0 : Reload register. */ -#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ -#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ -#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ - -/* Register: WDT_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - -#ifdef __cplusplus -} -#endif - -/*lint --flb "Leave library region" */ -#endif +/* Copyright (c) 2013, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef __NRF51_BITS_H +#define __NRF51_BITS_H + +/*lint ++flb "Enter library region */ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* Peripheral: AAR */ +/* Description: Accelerated Address Resolver. */ + +/* Register: AAR_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ +#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on RESOLVED event. */ +#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: AAR_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ +#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on RESOLVED event. */ +#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: AAR_STATUS */ +/* Description: Resolution status. */ + +/* Bits 3..0 : The IRK used last time an address was resolved. */ +#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ + +/* Register: AAR_ENABLE */ +/* Description: Enable AAR. */ + +/* Bits 1..0 : Enable AAR. */ +#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ +#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ + +/* Register: AAR_NIRK */ +/* Description: Number of Identity root Keys in the IRK data structure. */ + +/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ +#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ +#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ + +/* Register: AAR_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ADC */ +/* Description: Analog to digital converter. */ + +/* Register: ADC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ADC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on END event. */ +#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ADC_BUSY */ +/* Description: ADC busy register. */ + +/* Bit 0 : ADC busy register. */ +#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ +#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ +#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ +#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ + +/* Register: ADC_ENABLE */ +/* Description: ADC enable. */ + +/* Bits 1..0 : ADC enable. */ +#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ +#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ + +/* Register: ADC_CONFIG */ +/* Description: ADC configuration register. */ + +/* Bits 17..16 : ADC external reference pin selection. */ +#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ + +/* Bits 15..8 : ADC analog pin selection. */ +#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ +#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ + +/* Bits 6..5 : ADC reference selection. */ +#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ +#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ +#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ +#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ +#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ + +/* Bits 4..2 : ADC input selection. */ +#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ +#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ +#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ + +/* Bits 1..0 : ADC resolution. */ +#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ +#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ +#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ +#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ +#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ + +/* Register: ADC_RESULT */ +/* Description: Result of ADC conversion. */ + +/* Bits 9..0 : Result of ADC conversion. */ +#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ + +/* Register: ADC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: AMLI */ +/* Description: AHB Multi-Layer Interface. */ + +/* Register: AMLI_RAMPRI_CPU0 */ +/* Description: Configurable priority configuration register for CPU0. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_SPIS1 */ +/* Description: Configurable priority configuration register for SPIS1. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_RADIO */ +/* Description: Configurable priority configuration register for RADIO. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_ECB */ +/* Description: Configurable priority configuration register for ECB. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_CCM */ +/* Description: Configurable priority configuration register for CCM. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_AAR */ +/* Description: Configurable priority configuration register for AAR. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Peripheral: CCM */ +/* Description: AES CCM Mode Encryption. */ + +/* Register: CCM_SHORTS */ +/* Description: Shortcuts for the CCM. */ + +/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: CCM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ERROR event. */ +#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ENDCRYPT event. */ +#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDKSGEN event. */ +#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CCM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ERROR event. */ +#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ENDCRYPT event. */ +#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CCM_MICSTATUS */ +/* Description: CCM RX MIC check result. */ + +/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ +#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ +#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ + +/* Register: CCM_ENABLE */ +/* Description: CCM enable. */ + +/* Bits 1..0 : CCM enable. */ +#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ +#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ + +/* Register: CCM_MODE */ +/* Description: Operation mode. */ + +/* Bit 0 : CCM mode operation. */ +#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ +#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ + +/* Register: CCM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: CLOCK */ +/* Description: Clock control. */ + +/* Register: CLOCK_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 4 : Enable interrupt on CTTO event. */ +#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on DONE event. */ +#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CLOCK_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 4 : Disable interrupt on CTTO event. */ +#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on DONE event. */ +#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CLOCK_HFCLKRUN */ +/* Description: Task HFCLKSTART trigger status. */ + +/* Bit 0 : Task HFCLKSTART trigger status. */ +#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ +#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ + +/* Register: CLOCK_HFCLKSTAT */ +/* Description: High frequency clock status. */ + +/* Bit 16 : State for the HFCLK. */ +#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ +#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ + +/* Bit 0 : Active clock source for the HF clock. */ +#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ +#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ + +/* Register: CLOCK_LFCLKRUN */ +/* Description: Task LFCLKSTART triggered status. */ + +/* Bit 0 : Task LFCLKSTART triggered status. */ +#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ +#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ + +/* Register: CLOCK_LFCLKSTAT */ +/* Description: Low frequency clock status. */ + +/* Bit 16 : State for the LF clock. */ +#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ +#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ + +/* Bits 1..0 : Active clock source for the LF clock. */ +#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ + +/* Register: CLOCK_LFCLKSRCCOPY */ +/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ + +/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_LFCLKSRC */ +/* Description: Clock source for the LFCLK clock. */ + +/* Bits 1..0 : Clock source. */ +#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_CTIV */ +/* Description: Calibration timer interval. */ + +/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ +#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ +#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ + +/* Register: CLOCK_XTALFREQ */ +/* Description: Crystal frequency. */ + +/* Bits 7..0 : External Xtal frequency selection. */ +#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ +#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ + + +/* Peripheral: ECB */ +/* Description: AES ECB Mode Encryption. */ + +/* Register: ECB_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 1 : Enable interrupt on ERRORECB event. */ +#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDECB event. */ +#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ECB_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 1 : Disable interrupt on ERRORECB event. */ +#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDECB event. */ +#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ECB_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: FICR */ +/* Description: Factory Information Configuration. */ + +/* Register: FICR_RBD */ +/* Description: RBD. */ + +/* Bits 31..0 : RBD. */ +#define FICR_RBD_RBD_Pos (0UL) /*!< Position of RBD field. */ +#define FICR_RBD_RBD_Msk (0xFFFFFFFFUL << FICR_RBD_RBD_Pos) /*!< Bit mask of RBD field. */ +#define FICR_RBD_RBD_NoRoyalty (0xFFFFFFFEUL) /*!< No royalty. */ +#define FICR_RBD_RBD_Royalty (0xFFFFFFFFUL) /*!< Royalty. */ + +/* Register: FICR_PPFC */ +/* Description: Pre-programmed factory code present. */ + +/* Bits 7..0 : Pre-programmed factory code present. */ +#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ +#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ +#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ +#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ + +/* Register: FICR_CONFIGID */ +/* Description: Configuration identifier. */ + +/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ +#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ +#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ + +/* Bits 15..0 : Hardware Identification Number. */ +#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ +#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ + +/* Register: FICR_DEVICEADDRTYPE */ +/* Description: Device address type. */ + +/* Bit 0 : Device address type. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ + +/* Register: FICR_OVERRIDEEN */ +/* Description: Radio calibration override enable. */ + +/* Bit 3 : Override default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ + +/* Bit 0 : Override default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ + + +/* Peripheral: GPIO */ +/* Description: General purpose input and output. */ + +/* Register: GPIO_OUT */ +/* Description: Write GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ + +/* Register: GPIO_OUTSET */ +/* Description: Set individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ + +/* Register: GPIO_OUTCLR */ +/* Description: Clear individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ + +/* Register: GPIO_IN */ +/* Description: Read GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ + +/* Register: GPIO_DIR */ +/* Description: Direction of GPIO pins. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ + +/* Register: GPIO_DIRSET */ +/* Description: DIR set register. */ + +/* Bit 31 : Set as output pin 31. */ +#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ + +/* Bit 30 : Set as output pin 30. */ +#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ + +/* Bit 29 : Set as output pin 29. */ +#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ + +/* Bit 28 : Set as output pin 28. */ +#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ + +/* Bit 27 : Set as output pin 27. */ +#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ + +/* Bit 26 : Set as output pin 26. */ +#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ + +/* Bit 25 : Set as output pin 25. */ +#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ + +/* Bit 24 : Set as output pin 24. */ +#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ + +/* Bit 23 : Set as output pin 23. */ +#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ + +/* Bit 22 : Set as output pin 22. */ +#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ + +/* Bit 21 : Set as output pin 21. */ +#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ + +/* Bit 20 : Set as output pin 20. */ +#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ + +/* Bit 19 : Set as output pin 19. */ +#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ + +/* Bit 18 : Set as output pin 18. */ +#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ + +/* Bit 17 : Set as output pin 17. */ +#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ + +/* Bit 16 : Set as output pin 16. */ +#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ + +/* Bit 15 : Set as output pin 15. */ +#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ + +/* Bit 14 : Set as output pin 14. */ +#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ + +/* Bit 13 : Set as output pin 13. */ +#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ + +/* Bit 12 : Set as output pin 12. */ +#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ + +/* Bit 11 : Set as output pin 11. */ +#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ + +/* Bit 10 : Set as output pin 10. */ +#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ + +/* Bit 9 : Set as output pin 9. */ +#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ + +/* Bit 8 : Set as output pin 8. */ +#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ + +/* Bit 7 : Set as output pin 7. */ +#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ + +/* Bit 6 : Set as output pin 6. */ +#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ + +/* Bit 5 : Set as output pin 5. */ +#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ + +/* Bit 4 : Set as output pin 4. */ +#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ + +/* Bit 3 : Set as output pin 3. */ +#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ + +/* Bit 2 : Set as output pin 2. */ +#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ + +/* Bit 1 : Set as output pin 1. */ +#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ + +/* Bit 0 : Set as output pin 0. */ +#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ + +/* Register: GPIO_DIRCLR */ +/* Description: DIR clear register. */ + +/* Bit 31 : Set as input pin 31. */ +#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 30 : Set as input pin 30. */ +#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 29 : Set as input pin 29. */ +#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 28 : Set as input pin 28. */ +#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 27 : Set as input pin 27. */ +#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 26 : Set as input pin 26. */ +#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 25 : Set as input pin 25. */ +#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 24 : Set as input pin 24. */ +#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 23 : Set as input pin 23. */ +#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 22 : Set as input pin 22. */ +#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 21 : Set as input pin 21. */ +#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 20 : Set as input pin 20. */ +#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 19 : Set as input pin 19. */ +#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 18 : Set as input pin 18. */ +#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 17 : Set as input pin 17. */ +#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 16 : Set as input pin 16. */ +#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 15 : Set as input pin 15. */ +#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 14 : Set as input pin 14. */ +#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 13 : Set as input pin 13. */ +#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 12 : Set as input pin 12. */ +#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 11 : Set as input pin 11. */ +#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 10 : Set as input pin 10. */ +#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 9 : Set as input pin 9. */ +#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 8 : Set as input pin 8. */ +#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 7 : Set as input pin 7. */ +#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 6 : Set as input pin 6. */ +#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 5 : Set as input pin 5. */ +#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 4 : Set as input pin 4. */ +#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 3 : Set as input pin 3. */ +#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 2 : Set as input pin 2. */ +#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 1 : Set as input pin 1. */ +#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 0 : Set as input pin 0. */ +#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ + +/* Register: GPIO_PIN_CNF */ +/* Description: Configuration of GPIO pins. */ + +/* Bits 17..16 : Pin sensing mechanism. */ +#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ +#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ + +/* Bits 10..8 : Drive configuration. */ +#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ + +/* Bits 3..2 : Pull-up or -down configuration. */ +#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ +#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ +#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ +#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ +#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ + +/* Bit 1 : Connect or disconnect input path. */ +#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ +#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ + +/* Bit 0 : Pin direction. */ +#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ +#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ +#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ +#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ + + +/* Peripheral: GPIOTE */ +/* Description: GPIO tasks and events. */ + +/* Register: GPIOTE_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 31 : Enable interrupt on PORT event. */ +#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on IN[3] event. */ +#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on IN[2] event. */ +#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on IN[1] event. */ +#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on IN[0] event. */ +#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: GPIOTE_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 31 : Disable interrupt on PORT event. */ +#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on IN[3] event. */ +#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on IN[2] event. */ +#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on IN[1] event. */ +#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on IN[0] event. */ +#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: GPIOTE_CONFIG */ +/* Description: Channel configuration registers. */ + +/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ +#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ +#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ + +/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ +#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ +#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ +#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ + +/* Bits 12..8 : Pin select. */ +#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ + +/* Bits 1..0 : Mode */ +#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ +#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ +#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ + +/* Register: GPIOTE_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: LPCOMP */ +/* Description: Low power comparator. */ + +/* Register: LPCOMP_SHORTS */ +/* Description: Shortcuts for the LPCOMP. */ + +/* Bit 4 : Shortcut between CROSS event and STOP task. */ +#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between UP event and STOP task. */ +#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DOWN event and STOP task. */ +#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between RADY event and STOP task. */ +#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and SAMPLE task. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: LPCOMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: LPCOMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: LPCOMP_RESULT */ +/* Description: Result of last compare. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: LPCOMP_ENABLE */ +/* Description: Enable the LPCOMP. */ + +/* Bits 1..0 : Enable or disable LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ + +/* Register: LPCOMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: LPCOMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ + +/* Register: LPCOMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: LPCOMP_ANADETECT */ +/* Description: Analog detect configuration. */ + +/* Bits 1..0 : Analog detect configuration. */ +#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ +#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ +#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ + +/* Register: LPCOMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: MPU */ +/* Description: Memory Protection Unit. */ + +/* Register: MPU_PERR0 */ +/* Description: Configuration of peripherals in mpu regions. */ + +/* Bit 31 : PPI region configuration. */ +#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ +#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ +#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 30 : NVMC region configuration. */ +#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ +#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ +#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 19 : LPCOMP region configuration. */ +#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ +#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ +#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 18 : QDEC region configuration. */ +#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ +#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ +#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 17 : RTC1 region configuration. */ +#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ +#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ +#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 16 : WDT region configuration. */ +#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ +#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ +#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 15 : CCM and AAR region configuration. */ +#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 14 : ECB region configuration. */ +#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ +#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ +#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 13 : RNG region configuration. */ +#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ +#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ +#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 12 : TEMP region configuration. */ +#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ +#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ +#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 11 : RTC0 region configuration. */ +#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ +#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ +#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 10 : TIMER2 region configuration. */ +#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ +#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ +#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 9 : TIMER1 region configuration. */ +#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ +#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ +#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 8 : TIMER0 region configuration. */ +#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ +#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ +#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 7 : ADC region configuration. */ +#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ +#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ +#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 6 : GPIOTE region configuration. */ +#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 4 : SPI1 and TWI1 region configuration. */ +#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 3 : SPI0 and TWI0 region configuration. */ +#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 2 : UART0 region configuration. */ +#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ +#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ +#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 1 : RADIO region configuration. */ +#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ +#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ +#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 0 : POWER_CLOCK region configuration. */ +#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Register: MPU_PROTENSET0 */ +/* Description: Erase and write protection bit enable set register. */ + +/* Bit 31 : Protection enable for region 31. */ +#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 30. */ +#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 29. */ +#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 28. */ +#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 27. */ +#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 26. */ +#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 25. */ +#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 24. */ +#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 23. */ +#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 22. */ +#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 21. */ +#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 20. */ +#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 19. */ +#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 18. */ +#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 17. */ +#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 16. */ +#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 15. */ +#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 14. */ +#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 13. */ +#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 12. */ +#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 11. */ +#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 10. */ +#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 9. */ +#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 8. */ +#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 7. */ +#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 6. */ +#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 5. */ +#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 4. */ +#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 3. */ +#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 2. */ +#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 1. */ +#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 0. */ +#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_PROTENSET1 */ +/* Description: Erase and write protection bit enable set register. */ + +/* Bit 31 : Protection enable for region 63. */ +#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 62. */ +#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 61. */ +#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 60. */ +#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 59. */ +#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 58. */ +#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 57. */ +#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 56. */ +#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 55. */ +#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 54. */ +#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 53. */ +#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 52. */ +#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 51. */ +#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 50. */ +#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 49. */ +#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 48. */ +#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 47. */ +#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 46. */ +#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 45. */ +#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 44. */ +#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 43. */ +#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 42. */ +#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 41. */ +#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 40. */ +#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 39. */ +#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 38. */ +#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 37. */ +#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 36. */ +#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 35. */ +#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 34. */ +#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 33. */ +#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 32. */ +#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_DISABLEINDEBUG */ +/* Description: Disable erase and write protection mechanism in debug mode. */ + +/* Bit 0 : Disable protection mechanism in debug mode. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ + +/* Register: MPU_PROTBLOCKSIZE */ +/* Description: Erase and write protection block size. */ + +/* Bits 1..0 : Erase and write protection block size. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ + +/* Register: MPU_ENRBDREG */ +/* Description: Enable or disable RBD. */ + +/* Bit 0 : Enable or disable RBD. */ +#define MPU_ENRBDREG_ENRBDREG_Pos (0UL) /*!< Position of ENRBDREG field. */ +#define MPU_ENRBDREG_ENRBDREG_Msk (0x1UL << MPU_ENRBDREG_ENRBDREG_Pos) /*!< Bit mask of ENRBDREG field. */ +#define MPU_ENRBDREG_ENRBDREG_Disabled (0UL) /*!< RBD disabled. */ +#define MPU_ENRBDREG_ENRBDREG_Enabled (1UL) /*!< RBD enabled. */ + + +/* Peripheral: NVMC */ +/* Description: Non Volatile Memory Controller. */ + +/* Register: NVMC_READY */ +/* Description: Ready flag. */ + +/* Bit 0 : NVMC ready. */ +#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ +#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ +#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ +#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ + +/* Register: NVMC_CONFIG */ +/* Description: Configuration register. */ + +/* Bits 1..0 : Program write enable. */ +#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ +#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ +#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ +#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ +#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ + +/* Register: NVMC_ERASEALL */ +/* Description: Register for erasing all non-volatile user memory. */ + +/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ +#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ + +/* Register: NVMC_ERASEUICR */ +/* Description: Register for start erasing User Information Congfiguration Registers. */ + +/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ +#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ + + +/* Peripheral: POWER */ +/* Description: Power Control. */ + +/* Register: POWER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on POFWARN event. */ +#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: POWER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on POFWARN event. */ +#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: POWER_RESETREAS */ +/* Description: Reset reason. */ + +/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ +#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ +#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ + +/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ +#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ +#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ + +/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ +#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ +#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ + +/* Bit 3 : Reset from CPU lock-up detected. */ +#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ +#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ + +/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ +#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ +#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ + +/* Bit 1 : Reset from watchdog detected. */ +#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ +#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ + +/* Bit 0 : Reset from pin-reset detected. */ +#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ +#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ + +/* Register: POWER_RAMSTATUS */ +/* Description: Ram status register. */ + +/* Bit 3 : RAM block 3 status. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ + +/* Bit 2 : RAM block 2 status. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ + +/* Bit 1 : RAM block 1 status. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ + +/* Bit 0 : RAM block 0 status. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ + +/* Register: POWER_SYSTEMOFF */ +/* Description: System off register. */ + +/* Bit 0 : Enter system off mode. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ + +/* Register: POWER_POFCON */ +/* Description: Power failure configuration. */ + +/* Bits 2..1 : Set threshold level. */ +#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ +#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ +#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ +#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ + +/* Bit 0 : Power failure comparator enable. */ +#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ +#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ +#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ +#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ + +/* Register: POWER_GPREGRET */ +/* Description: General purpose retention register. This register is a retained register. */ + +/* Bits 7..0 : General purpose retention register. */ +#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ +#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ + +/* Register: POWER_RAMON */ +/* Description: Ram on/off. */ + +/* Bit 17 : RAM block 1 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ + +/* Bit 16 : RAM block 0 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ + +/* Bit 1 : RAM block 1 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ +#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ + +/* Bit 0 : RAM block 0 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ +#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ + +/* Register: POWER_RESET */ +/* Description: Pin reset functionality configuration register. This register is a retained register. */ + +/* Bit 0 : Enable or disable pin reset in debug interface mode. */ +#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ +#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ +#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ +#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ + +/* Register: POWER_RAMONB */ +/* Description: Ram on/off. */ + +/* Bit 17 : RAM block 3 behaviour in OFF mode. */ +#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ +#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ +#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ +#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ + +/* Bit 16 : RAM block 2 behaviour in OFF mode. */ +#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ +#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ +#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ +#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ + +/* Bit 1 : RAM block 3 behaviour in ON mode. */ +#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ +#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ +#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ +#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ + +/* Bit 0 : RAM block 2 behaviour in ON mode. */ +#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ +#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ +#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ +#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ + +/* Register: POWER_DCDCEN */ +/* Description: DCDC converter enable configuration register. */ + +/* Bit 0 : Enable DCDC converter. */ +#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ +#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ + +/* Register: POWER_DCDCFORCE */ +/* Description: DCDC power-up force register. */ + +/* Bit 1 : DCDC power-up force on. */ +#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ +#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ +#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ +#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ + +/* Bit 0 : DCDC power-up force off. */ +#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ +#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ +#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ +#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ + + +/* Peripheral: PPI */ +/* Description: PPI controller. */ + +/* Register: PPI_CHEN */ +/* Description: Channel enable. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ +#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ + +/* Register: PPI_CHENSET */ +/* Description: Channel enable set. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ + +/* Register: PPI_CHENCLR */ +/* Description: Channel enable clear. */ + +/* Bit 31 : Disable PPI channel 31. */ +#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 30 : Disable PPI channel 30. */ +#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 29 : Disable PPI channel 29. */ +#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 28 : Disable PPI channel 28. */ +#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 27 : Disable PPI channel 27. */ +#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 26 : Disable PPI channel 26. */ +#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 25 : Disable PPI channel 25. */ +#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 24 : Disable PPI channel 24. */ +#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 23 : Disable PPI channel 23. */ +#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 22 : Disable PPI channel 22. */ +#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 21 : Disable PPI channel 21. */ +#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 20 : Disable PPI channel 20. */ +#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 15 : Disable PPI channel 15. */ +#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 14 : Disable PPI channel 14. */ +#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 13 : Disable PPI channel 13. */ +#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 12 : Disable PPI channel 12. */ +#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 11 : Disable PPI channel 11. */ +#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 10 : Disable PPI channel 10. */ +#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 9 : Disable PPI channel 9. */ +#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 8 : Disable PPI channel 8. */ +#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 7 : Disable PPI channel 7. */ +#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 6 : Disable PPI channel 6. */ +#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 5 : Disable PPI channel 5. */ +#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 4 : Disable PPI channel 4. */ +#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 3 : Disable PPI channel 3. */ +#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 2 : Disable PPI channel 2. */ +#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 1 : Disable PPI channel 1. */ +#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 0 : Disable PPI channel 0. */ +#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ + +/* Register: PPI_CHG */ +/* Description: Channel group configuration. */ + +/* Bit 31 : Include CH31 in channel group. */ +#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ + +/* Bit 30 : Include CH30 in channel group. */ +#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ + +/* Bit 29 : Include CH29 in channel group. */ +#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ + +/* Bit 28 : Include CH28 in channel group. */ +#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ + +/* Bit 27 : Include CH27 in channel group. */ +#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ + +/* Bit 26 : Include CH26 in channel group. */ +#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ + +/* Bit 25 : Include CH25 in channel group. */ +#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ + +/* Bit 24 : Include CH24 in channel group. */ +#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ + +/* Bit 23 : Include CH23 in channel group. */ +#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ + +/* Bit 22 : Include CH22 in channel group. */ +#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ + +/* Bit 21 : Include CH21 in channel group. */ +#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ + +/* Bit 20 : Include CH20 in channel group. */ +#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ + +/* Bit 15 : Include CH15 in channel group. */ +#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ + +/* Bit 14 : Include CH14 in channel group. */ +#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ + +/* Bit 13 : Include CH13 in channel group. */ +#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ + +/* Bit 12 : Include CH12 in channel group. */ +#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ + +/* Bit 11 : Include CH11 in channel group. */ +#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ + +/* Bit 10 : Include CH10 in channel group. */ +#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ + +/* Bit 9 : Include CH9 in channel group. */ +#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ + +/* Bit 8 : Include CH8 in channel group. */ +#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ + +/* Bit 7 : Include CH7 in channel group. */ +#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ + +/* Bit 6 : Include CH6 in channel group. */ +#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ + +/* Bit 5 : Include CH5 in channel group. */ +#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ + +/* Bit 4 : Include CH4 in channel group. */ +#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ + +/* Bit 3 : Include CH3 in channel group. */ +#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ + +/* Bit 2 : Include CH2 in channel group. */ +#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ + +/* Bit 1 : Include CH1 in channel group. */ +#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ + +/* Bit 0 : Include CH0 in channel group. */ +#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ + + +/* Peripheral: PU */ +/* Description: Patch unit. */ + +/* Register: PU_PATCHADDR */ +/* Description: Relative address of patch instructions. */ + +/* Bits 24..0 : Relative address of patch instructions. */ +#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ +#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ + +/* Register: PU_PATCHEN */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ + +/* Register: PU_PATCHENSET */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ + +/* Register: PU_PATCHENCLR */ +/* Description: Patch disable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ + + +/* Peripheral: QDEC */ +/* Description: Rotary decoder. */ + +/* Register: QDEC_SHORTS */ +/* Description: Shortcuts for the QDEC. */ + +/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: QDEC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ACCOF event. */ +#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on REPORTRDY event. */ +#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on SAMPLERDY event. */ +#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: QDEC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ACCOF event. */ +#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on REPORTRDY event. */ +#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on SAMPLERDY event. */ +#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: QDEC_ENABLE */ +/* Description: Enable the QDEC. */ + +/* Bit 0 : Enable or disable QDEC. */ +#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ +#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ + +/* Register: QDEC_LEDPOL */ +/* Description: LED output pin polarity. */ + +/* Bit 0 : LED output pin polarity. */ +#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ +#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ + +/* Register: QDEC_SAMPLEPER */ +/* Description: Sample period. */ + +/* Bits 2..0 : Sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ + +/* Register: QDEC_SAMPLE */ +/* Description: Motion sample value. */ + +/* Bits 31..0 : Last sample taken in compliment to 2. */ +#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ +#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ + +/* Register: QDEC_REPORTPER */ +/* Description: Number of samples to generate an EVENT_REPORTRDY. */ + +/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ +#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ + +/* Register: QDEC_DBFEN */ +/* Description: Enable debouncer input filters. */ + +/* Bit 0 : Enable debounce input filters. */ +#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ +#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ + +/* Register: QDEC_LEDPRE */ +/* Description: Time LED is switched ON before the sample. */ + +/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ +#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ +#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ + +/* Register: QDEC_ACCDBL */ +/* Description: Accumulated double (error) transitions register. */ + +/* Bits 3..0 : Accumulated double (error) transitions. */ +#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ +#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ + +/* Register: QDEC_ACCDBLREAD */ +/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ + +/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ + +/* Register: QDEC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RADIO */ +/* Description: The radio. */ + +/* Register: RADIO_SHORTS */ +/* Description: Shortcuts for the radio. */ + +/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 5 : Shortcut between END event and START task. */ +#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ +#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ +#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ +#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ +#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between END event and DISABLE task. */ +#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and START task. */ +#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ +#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ +#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RADIO_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on BCMATCH event. */ +#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on RSSIEND event. */ +#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 6 : Enable interrupt on DEVMISS event. */ +#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 5 : Enable interrupt on DEVMATCH event. */ +#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 4 : Enable interrupt on DISABLED event. */ +#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on END event. */ +#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on PAYLOAD event. */ +#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ADDRESS event. */ +#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RADIO_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on BCMATCH event. */ +#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on RSSIEND event. */ +#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 6 : Disable interrupt on DEVMISS event. */ +#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 5 : Disable interrupt on DEVMATCH event. */ +#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 4 : Disable interrupt on DISABLED event. */ +#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on END event. */ +#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on PAYLOAD event. */ +#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ADDRESS event. */ +#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RADIO_CRCSTATUS */ +/* Description: CRC status of received packet. */ + +/* Bit 0 : CRC status of received packet. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ + +/* Register: RADIO_CD */ +/* Description: Carrier detect. */ + +/* Bit 0 : Carrier detect. */ +#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ +#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ + +/* Register: RADIO_RXMATCH */ +/* Description: Received address. */ + +/* Bits 2..0 : Logical address in which previous packet was received. */ +#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ +#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ + +/* Register: RADIO_RXCRC */ +/* Description: Received CRC. */ + +/* Bits 23..0 : CRC field of previously received packet. */ +#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ +#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ + +/* Register: RADIO_DAI */ +/* Description: Device address match index. */ + +/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ +#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ +#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ + +/* Register: RADIO_FREQUENCY */ +/* Description: Frequency. */ + +/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ +#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ + +/* Register: RADIO_TXPOWER */ +/* Description: Output power. */ + +/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ +#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ +#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ + +/* Register: RADIO_MODE */ +/* Description: Data rate and modulation. */ + +/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ +#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ + +/* Register: RADIO_PCNF0 */ +/* Description: Packet configuration 0. */ + +/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ +#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ + +/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ +#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ +#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ + +/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ +#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ + +/* Register: RADIO_PCNF1 */ +/* Description: Packet configuration 1. */ + +/* Bit 25 : Packet whitening enable. */ +#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ +#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ + +/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ +#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ +#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ + +/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ +#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ + +/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ +#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ + +/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ +#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ +#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ + +/* Register: RADIO_PREFIX0 */ +/* Description: Prefixes bytes for logical addresses 0 to 3. */ + +/* Bits 31..24 : Address prefix 3. Decision point: START task. */ +#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ +#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ + +/* Bits 23..16 : Address prefix 2. Decision point: START task. */ +#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ +#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ + +/* Bits 15..8 : Address prefix 1. Decision point: START task. */ +#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ +#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ + +/* Bits 7..0 : Address prefix 0. Decision point: START task. */ +#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ +#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ + +/* Register: RADIO_PREFIX1 */ +/* Description: Prefixes bytes for logical addresses 4 to 7. */ + +/* Bits 31..24 : Address prefix 7. Decision point: START task. */ +#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ +#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ + +/* Bits 23..16 : Address prefix 6. Decision point: START task. */ +#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ +#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ + +/* Bits 15..8 : Address prefix 5. Decision point: START task. */ +#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ +#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ + +/* Bits 7..0 : Address prefix 4. Decision point: START task. */ +#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ +#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ + +/* Register: RADIO_TXADDRESS */ +/* Description: Transmit address select. */ + +/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ +#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ +#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ + +/* Register: RADIO_RXADDRESSES */ +/* Description: Receive address select. */ + +/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ + +/* Register: RADIO_CRCCNF */ +/* Description: CRC configuration. */ + +/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ +#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ +#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ +#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ +#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ + +/* Bits 1..0 : CRC length. Decision point: START task. */ +#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ +#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ +#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ +#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ +#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ +#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ + +/* Register: RADIO_CRCPOLY */ +/* Description: CRC polynomial. */ + +/* Bits 23..0 : CRC polynomial. Decision point: START task. */ +#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ +#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ + +/* Register: RADIO_CRCINIT */ +/* Description: CRC initial value. */ + +/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ +#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ +#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ + +/* Register: RADIO_TEST */ +/* Description: Test features enable register. */ + +/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ +#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ +#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ +#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ +#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ + +/* Bit 0 : Constant carrier. Decision point: TXEN task. */ +#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ +#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ +#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ +#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ + +/* Register: RADIO_TIFS */ +/* Description: Inter Frame Spacing in microseconds. */ + +/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ +#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ +#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ + +/* Register: RADIO_RSSISAMPLE */ +/* Description: RSSI sample. */ + +/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ + +/* Register: RADIO_STATE */ +/* Description: Current radio state. */ + +/* Bits 3..0 : Current radio state. */ +#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ +#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ +#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ +#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ +#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ +#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ +#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ +#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ +#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ +#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ +#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ + +/* Register: RADIO_DATAWHITEIV */ +/* Description: Data whitening initial value. */ + +/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ + +/* Register: RADIO_DAP */ +/* Description: Device address prefix. */ + +/* Bits 15..0 : Device address prefix. */ +#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ +#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ + +/* Register: RADIO_DACNF */ +/* Description: Device address match configuration. */ + +/* Bit 15 : TxAdd for device address 7. */ +#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ +#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ + +/* Bit 14 : TxAdd for device address 6. */ +#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ +#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ + +/* Bit 13 : TxAdd for device address 5. */ +#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ +#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ + +/* Bit 12 : TxAdd for device address 4. */ +#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ +#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ + +/* Bit 11 : TxAdd for device address 3. */ +#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ +#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ + +/* Bit 10 : TxAdd for device address 2. */ +#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ +#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ + +/* Bit 9 : TxAdd for device address 1. */ +#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ +#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ + +/* Bit 8 : TxAdd for device address 0. */ +#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ +#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ + +/* Bit 7 : Enable or disable device address matching using device address 7. */ +#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ +#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ +#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ + +/* Bit 6 : Enable or disable device address matching using device address 6. */ +#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ +#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ +#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ + +/* Bit 5 : Enable or disable device address matching using device address 5. */ +#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ +#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ +#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ + +/* Bit 4 : Enable or disable device address matching using device address 4. */ +#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ +#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ +#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ + +/* Bit 3 : Enable or disable device address matching using device address 3. */ +#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ +#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ +#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ + +/* Bit 2 : Enable or disable device address matching using device address 2. */ +#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ +#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ +#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ + +/* Bit 1 : Enable or disable device address matching using device address 1. */ +#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ +#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ +#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ + +/* Bit 0 : Enable or disable device address matching using device address 0. */ +#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ +#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ +#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ + +/* Register: RADIO_OVERRIDE0 */ +/* Description: Trim value override register 0. */ + +/* Bits 31..0 : Trim value override 0. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ + +/* Register: RADIO_OVERRIDE1 */ +/* Description: Trim value override register 1. */ + +/* Bits 31..0 : Trim value override 1. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ + +/* Register: RADIO_OVERRIDE2 */ +/* Description: Trim value override register 2. */ + +/* Bits 31..0 : Trim value override 2. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ + +/* Register: RADIO_OVERRIDE3 */ +/* Description: Trim value override register 3. */ + +/* Bits 31..0 : Trim value override 3. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ + +/* Register: RADIO_OVERRIDE4 */ +/* Description: Trim value override register 4. */ + +/* Bit 31 : Enable or disable override of default trim values. */ +#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ +#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ + +/* Bits 27..0 : Trim value override 4. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ + +/* Register: RADIO_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RNG */ +/* Description: Random Number Generator. */ + +/* Register: RNG_SHORTS */ +/* Description: Shortcuts for the RNG. */ + +/* Bit 0 : Shortcut between VALRDY event and STOP task. */ +#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RNG_INTENSET */ +/* Description: Interrupt enable set register */ + +/* Bit 0 : Enable interrupt on VALRDY event. */ +#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RNG_INTENCLR */ +/* Description: Interrupt enable clear register */ + +/* Bit 0 : Disable interrupt on VALRDY event. */ +#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RNG_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 0 : Digital error correction enable. */ +#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ +#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ + +/* Register: RNG_VALUE */ +/* Description: RNG random number. */ + +/* Bits 7..0 : Generated random number. */ +#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ +#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ + +/* Register: RNG_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RTC */ +/* Description: Real time counter 0. */ + +/* Register: RTC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] event. */ +#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] event. */ +#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] event. */ +#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] event. */ +#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on OVRFLW event. */ +#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on TICK event. */ +#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RTC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] event. */ +#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] event. */ +#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] event. */ +#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] event. */ +#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on OVRFLW event. */ +#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on TICK event. */ +#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RTC_EVTEN */ +/* Description: Configures event enable routing to PPI for each RTC event. */ + +/* Bit 19 : COMPARE[3] event enable. */ +#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 18 : COMPARE[2] event enable. */ +#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 17 : COMPARE[1] event enable. */ +#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 16 : COMPARE[0] event enable. */ +#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 1 : OVRFLW event enable. */ +#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 0 : TICK event enable. */ +#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ + +/* Register: RTC_EVTENSET */ +/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ + +/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ + +/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ + +/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ + +/* Bit 1 : Enable routing to PPI of OVRFLW event. */ +#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ + +/* Bit 0 : Enable routing to PPI of TICK event. */ +#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ + +/* Register: RTC_EVTENCLR */ +/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 1 : Disable routing to PPI of OVRFLW event. */ +#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 0 : Disable routing to PPI of TICK event. */ +#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ + +/* Register: RTC_COUNTER */ +/* Description: Current COUNTER value. */ + +/* Bits 23..0 : Counter value. */ +#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ +#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ + +/* Register: RTC_PRESCALER */ +/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ + +/* Bits 11..0 : RTC PRESCALER value. */ +#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: RTC_CC */ +/* Description: Capture/compare registers. */ + +/* Bits 23..0 : Compare value. */ +#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ +#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ + +/* Register: RTC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPI */ +/* Description: SPI master 0. */ + +/* Register: SPI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on READY event. */ +#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPI_ENABLE */ +/* Description: Enable SPI. */ + +/* Bits 2..0 : Enable or disable SPI. */ +#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ +#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ + +/* Register: SPI_RXD */ +/* Description: RX data. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: SPI_TXD */ +/* Description: TX data. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: SPI_FREQUENCY */ +/* Description: SPI frequency */ + +/* Bits 31..0 : SPI data rate. */ +#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ +#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ + +/* Register: SPI_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPIS */ +/* Description: SPI slave 1. */ + +/* Register: SPIS_SHORTS */ +/* Description: Shortcuts for SPIS. */ + +/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ +#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ +#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: SPIS_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on ACQUIRED event. */ +#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on END event. */ +#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPIS_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on ACQUIRED event. */ +#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on END event. */ +#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPIS_SEMSTAT */ +/* Description: Semaphore status. */ + +/* Bits 1..0 : Semaphore status. */ +#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ +#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ +#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ +#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ + +/* Register: SPIS_STATUS */ +/* Description: Status from last transaction. */ + +/* Bit 1 : RX buffer overflow detected, and prevented. */ +#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ + +/* Bit 0 : TX buffer overread detected, and prevented. */ +#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ + +/* Register: SPIS_ENABLE */ +/* Description: Enable SPIS. */ + +/* Bits 2..0 : Enable or disable SPIS. */ +#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ +#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ + +/* Register: SPIS_MAXRX */ +/* Description: Maximum number of bytes in the receive buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ +#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ +#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ + +/* Register: SPIS_AMOUNTRX */ +/* Description: Number of bytes received in last granted transaction. */ + +/* Bits 7..0 : Number of bytes received in last granted transaction. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ + +/* Register: SPIS_MAXTX */ +/* Description: Maximum number of bytes in the transmit buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ +#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ +#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ + +/* Register: SPIS_AMOUNTTX */ +/* Description: Number of bytes transmitted in last granted transaction. */ + +/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ + +/* Register: SPIS_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPIS_DEF */ +/* Description: Default character. */ + +/* Bits 7..0 : Default character. */ +#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ +#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ + +/* Register: SPIS_ORC */ +/* Description: Over-read character. */ + +/* Bits 7..0 : Over-read character. */ +#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ +#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ + +/* Register: SPIS_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TEMP */ +/* Description: Temperature Sensor. */ + +/* Register: TEMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on DATARDY event. */ +#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TEMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on DATARDY event. */ +#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TEMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TIMER */ +/* Description: Timer 0. */ + +/* Register: TIMER_SHORTS */ +/* Description: Shortcuts for Timer. */ + +/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TIMER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] */ +#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] */ +#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] */ +#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] */ +#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TIMER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] */ +#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] */ +#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] */ +#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] */ +#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TIMER_MODE */ +/* Description: Timer Mode selection. */ + +/* Bit 0 : Select Normal or Counter mode. */ +#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ +#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ + +/* Register: TIMER_BITMODE */ +/* Description: Sets timer behaviour. */ + +/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ +#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ + +/* Register: TIMER_PRESCALER */ +/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ + +/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ +#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: TIMER_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TWI */ +/* Description: Two-wire interface master 0. */ + +/* Register: TWI_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 1 : Shortcut between BB event and the STOP task. */ +#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ +#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TWI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 18 : Enable interrupt on SUSPENDED event. */ +#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ +#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ +#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 14 : Enable interrupt on BB event. */ +#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXDSENT event. */ +#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on STOPPED event. */ +#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TWI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 18 : Disable interrupt on SUSPENDED event. */ +#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ +#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ +#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 14 : Disable interrupt on BB event. */ +#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXDSENT event. */ +#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXDREADY event. */ +#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on STOPPED event. */ +#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TWI_ERRORSRC */ +/* Description: Two-wire error source. Write error field to 1 to clear error. */ + +/* Bit 2 : NACK received after sending a data byte. */ +#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ +#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ +#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : NACK received after sending the address. */ +#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ +#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ +#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ + +/* Register: TWI_ENABLE */ +/* Description: Enable two-wire master. */ + +/* Bits 2..0 : Enable or disable W2M */ +#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ +#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ + +/* Register: TWI_RXD */ +/* Description: RX data register. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: TWI_TXD */ +/* Description: TX data register. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: TWI_FREQUENCY */ +/* Description: Two-wire frequency. */ + +/* Bits 31..0 : Two-wire master clock frequency. */ +#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ + +/* Register: TWI_ADDRESS */ +/* Description: Address used in the two-wire transfer. */ + +/* Bits 6..0 : Two-wire address. */ +#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ +#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ + +/* Register: TWI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UART */ +/* Description: Universal Asynchronous Receiver/Transmitter. */ + +/* Register: UART_SHORTS */ +/* Description: Shortcuts for UART. */ + +/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ +#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ +#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: UART_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 17 : Enable interrupt on RXTO event. */ +#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXRDY event. */ +#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on RXRDY event. */ +#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on NCTS event. */ +#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on CTS event. */ +#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: UART_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 17 : Disable interrupt on RXTO event. */ +#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXRDY event. */ +#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXRDY event. */ +#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on NCTS event. */ +#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on CTS event. */ +#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: UART_ERRORSRC */ +/* Description: Error source. Write error field to 1 to clear error. */ + +/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ +#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ +#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ +#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ +#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ +#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ +#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ + +/* Register: UART_ENABLE */ +/* Description: Enable UART and acquire IOs. */ + +/* Bits 2..0 : Enable or disable UART and acquire IOs. */ +#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ +#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ + +/* Register: UART_RXD */ +/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consummed. If read when no character available, the UART will stop working. */ + +/* Bits 7..0 : RX data from previous transfer. Double buffered. */ +#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: UART_TXD */ +/* Description: TXD register. */ + +/* Bits 7..0 : TX data for transfer. */ +#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: UART_BAUDRATE */ +/* Description: UART Baudrate. */ + +/* Bits 31..0 : UART baudrate. */ +#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ + +/* Register: UART_CONFIG */ +/* Description: Configuration of parity and hardware flow control register. */ + +/* Bits 3..1 : Include parity bit. */ +#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ +#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ + +/* Bit 0 : Hardware flow control. */ +#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ +#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ +#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ +#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ + +/* Register: UART_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UICR */ +/* Description: User Information Configuration. */ + +/* Register: UICR_RBPCONF */ +/* Description: Readback protection configuration. */ + +/* Bits 15..8 : Readback protect all code in the device. */ +#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ +#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ +#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ + +/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ +#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ +#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ +#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ + +/* Register: UICR_XTALFREQ */ +/* Description: Reset value for CLOCK XTALFREQ register. */ + +/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ +#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ +#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ + +/* Register: UICR_FWID */ +/* Description: Firmware ID. */ + +/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ +#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ +#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ + + +/* Peripheral: WDT */ +/* Description: Watchdog Timer. */ + +/* Register: WDT_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on TIMEOUT event. */ +#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: WDT_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on TIMEOUT event. */ +#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: WDT_RUNSTATUS */ +/* Description: Watchdog running status. */ + +/* Bit 0 : Watchdog running status. */ +#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ +#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ + +/* Register: WDT_REQSTATUS */ +/* Description: Request status. */ + +/* Bit 7 : Request status for RR[7]. */ +#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ + +/* Bit 6 : Request status for RR[6]. */ +#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ + +/* Bit 5 : Request status for RR[5]. */ +#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ + +/* Bit 4 : Request status for RR[4]. */ +#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ + +/* Bit 3 : Request status for RR[3]. */ +#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ + +/* Bit 2 : Request status for RR[2]. */ +#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ + +/* Bit 1 : Request status for RR[1]. */ +#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ + +/* Bit 0 : Request status for RR[0]. */ +#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ + +/* Register: WDT_RREN */ +/* Description: Reload request enable. */ + +/* Bit 7 : Enable or disable RR[7] register. */ +#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ +#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ + +/* Bit 6 : Enable or disable RR[6] register. */ +#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ +#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ + +/* Bit 5 : Enable or disable RR[5] register. */ +#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ +#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ + +/* Bit 4 : Enable or disable RR[4] register. */ +#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ +#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ + +/* Bit 3 : Enable or disable RR[3] register. */ +#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ +#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ + +/* Bit 2 : Enable or disable RR[2] register. */ +#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ +#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ + +/* Bit 1 : Enable or disable RR[1] register. */ +#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ +#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ + +/* Bit 0 : Enable or disable RR[0] register. */ +#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ +#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ + +/* Register: WDT_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ +#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ +#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ + +/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ +#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ +#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ + +/* Register: WDT_RR */ +/* Description: Reload requests registers. */ + +/* Bits 31..0 : Reload register. */ +#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ +#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ +#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ + +/* Register: WDT_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + +#ifdef __cplusplus +} +#endif + +/*lint --flb "Leave library region" */ +#endif diff --git a/cpu/stm32f3/include/stm32f334x8.h b/cpu/stm32f3/include/stm32f334x8.h index 4c13b9b38..63d01cac9 100644 --- a/cpu/stm32f3/include/stm32f334x8.h +++ b/cpu/stm32f3/include/stm32f334x8.h @@ -1,7603 +1,7603 @@ -/** - ****************************************************************************** - * @file stm32f334x8.h - * @author MCD Application Team - * @version V1.1.0 - * @date 12-Sept-2014 - * @brief CMSIS STM32F334x4/STM32F334x6/STM32F334x8 Devices Peripheral Access Layer Header File. - * - * This file contains: - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral’s registers hardware - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2014 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS_Device - * @{ - */ - -/** @addtogroup stm32f334x8 - * @{ - */ - -#ifndef __STM32F334x8_H -#define __STM32F334x8_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /*!< Core revision r0p1 */ -#define __MPU_PRESENT 0 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices do not provide an MPU */ -#define __NVIC_PRIO_BITS 4 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices use 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -#define __FPU_PRESENT 1 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices provide an FPU */ - -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - -/** - * @brief STM32F334x4/STM32F334x6/STM32F334x8 device Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum -{ -/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ -/****** STM32 specific Interrupt Numbers **********************************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */ - RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ - ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */ - CAN_TX_IRQn = 19, /*!< CAN TX Interrupts */ - CAN_RX0_IRQn = 20, /*!< CAN RX0 Interrupts */ - CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */ - CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ - TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ - TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ - USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */ - USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */ - TIM6_DAC1_IRQn = 54, /*!< TIM6 global and DAC1 channel1 & 2 underrun error interrupts */ - TIM7_DAC2_IRQn = 55, /*!< TIM7 global and DAC2 channel1 underrun error Interrupt */ - COMP2_IRQn = 64, /*!< COMP2 global Interrupt via EXT Line22 */ - COMP4_6_IRQn = 65, /*!< COMP4 and COMP6 global Interrupt via EXT Line30 and 32 */ - HRTIM1_Master_IRQn = 67, /*!< HRTIM Master Timer global Interrupts */ - HRTIM1_TIMA_IRQn = 68, /*!< HRTIM Timer A global Interrupt */ - HRTIM1_TIMB_IRQn = 69, /*!< HRTIM Timer B global Interrupt */ - HRTIM1_TIMC_IRQn = 70, /*!< HRTIM Timer C global Interrupt */ - HRTIM1_TIMD_IRQn = 71, /*!< HRTIM Timer D global Interrupt */ - HRTIM1_TIME_IRQn = 72, /*!< HRTIM Timer E global Interrupt */ - HRTIM1_FLT_IRQn = 73, /*!< HRTIM Fault global Interrupt */ - FPU_IRQn = 81 /*!< Floating point Interrupt */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ -#include - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */ - __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */ - __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ - __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */ - uint32_t RESERVED0; /*!< Reserved, 0x010 */ - __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */ - __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */ - uint32_t RESERVED1; /*!< Reserved, 0x01C */ - __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */ - __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */ - __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */ - uint32_t RESERVED2; /*!< Reserved, 0x02C */ - __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ - __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ - __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ - __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ - __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */ - uint32_t RESERVED3; /*!< Reserved, 0x044 */ - uint32_t RESERVED4; /*!< Reserved, 0x048 */ - __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */ - uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */ - __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ - __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ - __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ - __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ - uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */ - __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */ - __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */ - __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */ - __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */ - uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ - __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */ - __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */ - uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ - uint32_t RESERVED9; /*!< Reserved, 0x0AC */ - __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */ - __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */ - -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */ - uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */ - __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */ - __IO uint32_t CDR; /*!< ADC common regular data register for dual - AND triple modes, Address offset: ADC1/3 base address + 0x30C */ -} ADC_Common_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ -typedef struct -{ - __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ - __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ - __IO uint32_t TDLR; /*!< CAN mailbox data low register */ - __IO uint32_t TDHR; /*!< CAN mailbox data high register */ -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ -typedef struct -{ - __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ - __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ - __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ - __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ -typedef struct -{ - __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ - __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ -typedef struct -{ - __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ - __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ - __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ - __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ - __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ - __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ - __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ - __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ - uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ - CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ - uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ - __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ - __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ - uint32_t RESERVED2; /*!< Reserved, 0x208 */ - __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ - uint32_t RESERVED3; /*!< Reserved, 0x210 */ - __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ - uint32_t RESERVED4; /*!< Reserved, 0x218 */ - __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ - uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ - CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ -} CAN_TypeDef; - -/** - * @brief Analog Comparators - */ - -typedef struct -{ - __IO uint32_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */ -} COMP_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, 0x05 */ - uint16_t RESERVED1; /*!< Reserved, 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ - uint32_t RESERVED2; /*!< Reserved, 0x0C */ - __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ - __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ - __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ - __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ - __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ - __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ - __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ - __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ - __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ - __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ - __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ - __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ - __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ - __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ - __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ - __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ - __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ - __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; /*!< DMA channel x configuration register */ - __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ - __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ - __IO uint32_t CMAR; /*!< DMA channel x memory address register */ -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ - __IO uint32_t IFCR; /*!< DMA interrupt clear flag register, Address offset: 0x04 */ -} DMA_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ - __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ - __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ - __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ - __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ - __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ - uint32_t RESERVED1; /*!< Reserved, 0x18 */ - uint32_t RESERVED2; /*!< Reserved, 0x1C */ - __IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x20 */ - __IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x24 */ - __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x28 */ - __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x2C */ - __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x30 */ - __IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x34 */ -}EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ - __IO uint32_t AR; /*!< FLASH address register, Address offset: 0x14 */ - uint32_t RESERVED; /*!< Reserved, 0x18 */ - __IO uint32_t OBR; /*!< FLASH Option byte register, Address offset: 0x1C */ - __IO uint32_t WRPR; /*!< FLASH Write register, Address offset: 0x20 */ - -} FLASH_TypeDef; - -/** - * @brief Option Bytes Registers - */ -typedef struct -{ - __IO uint16_t RDP; /*!