boards: fix doxygen @brief in periph.conf

boards/airfy-beacon/include/periph_conf.h

@@ -96,7 +96,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   I2C (TWI) configuration
+ * @name   I2C (TWI) configuration
  * @{
  */
 static const i2c_conf_t i2c_config[] = {
@@ -118,7 +118,7 @@ static const i2c_conf_t i2c_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/arduino-common/include/periph_conf.h

@@ -34,7 +34,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  *
  * The timer driver only supports the 16-bit timer (Timer1)
  * so this is the only one we can use here.
@@ -51,7 +51,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  *
  * Uno has only one UART, look in atmega_common
  * This is where magic happens
@@ -65,7 +65,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
  *
  * The atmega2560 has only one hardware SPI with fixed pin configuration, so all
  * we can do here, is to enable or disable it...

boards/arduino-mega2560/include/periph_conf.h

@@ -33,7 +33,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  *
  * The timer driver only supports the four 16-bit timers (Timer1, Timer3,
  * Timer4, Timer5), so those are the only onces we can use here.
@@ -58,7 +58,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  *
  * The UART devices have fixed pin mappings, so all we need to do, is to specify
  * which devices we would like to use and their corresponding RX interrupts. See
@@ -82,7 +82,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
  *
  * The atmega2560 has only one hardware SPI with fixed pin configuration, so all
  * we can do here, is to enable or disable it...

boards/avsextrem/include/periph_conf.h

@@ -26,7 +26,7 @@ extern "C" {
 #endif
 
 /**
- * @brief   Clock configuration
+ * @name   Clock configuration
  * @{
  */
 #define CLOCK_CORECLOCK     (72000000U)         /* this board runs with 72MHz */
@@ -35,28 +35,33 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration, select a number from 1 to 4
+ * @name   Timer configuration, select a number from 1 to 4
  * @{
  */
 #define TIMER_NUMOF         (1U)
 /** @} */
 
 /**
- * @brief Real Time Clock configuration
+ * @name Real Time Clock configuration
  */
-#define RTC_NUMOF           (1)
+#define RTC_NUMOF           (1U)
+/** @} */
 
 /**
- * @brief uart configuration
+ * @name UART configuration
+ * @{
  */
-#define UART_NUMOF          (1)
+#define UART_NUMOF          (1U)
 #define UART_0_EN           (1)
+/** @} */
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
+ * @{
  */
-#define SPI_NUMOF           (1)
+#define SPI_NUMOF           (1U)
 #define SPI_0_EN            (1)
+/** @} */
 
 #ifdef __cplusplus
 }

boards/calliope-mini/include/periph_conf.h

@@ -86,7 +86,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)
@@ -97,7 +97,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   I2C (TWI) configuration
+ * @name   I2C (TWI) configuration
  * @{
  */
 static const i2c_conf_t i2c_config[] = {
@@ -113,7 +113,7 @@ static const i2c_conf_t i2c_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/cc2650stk/include/periph_conf.h

@@ -34,7 +34,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -55,7 +55,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  *
  * The used CC26x0 CPU only supports a single UART device, so all we need to
  * configure are the RX and TX pins.

boards/chronos/include/periph_conf.h

@@ -36,7 +36,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 #define TIMER_NUMOF         (1U)
@@ -47,7 +47,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)

boards/ek-lm4f120xl/include/periph_conf.h

@@ -93,7 +93,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_NUMOF           (12)

boards/f4vi1/include/periph_conf.h

@@ -51,7 +51,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -78,7 +78,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -105,14 +105,14 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/fox/include/periph_conf.h

@@ -52,14 +52,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -86,7 +86,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -115,7 +115,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/iotlab-a8-m3/include/periph_conf.h

@@ -28,7 +28,7 @@ extern "C" {
 #endif
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
  * @{
  */
 static const spi_conf_t spi_config[] = {

boards/iotlab-m3/include/periph_conf.h

@@ -28,7 +28,7 @@ extern "C" {
 #endif
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
  * @{
  */
 static const spi_conf_t spi_config[] = {

boards/limifrog-v1/include/periph_conf.h

@@ -50,14 +50,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -76,7 +76,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -109,7 +109,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/maple-mini/include/periph_conf.h

@@ -57,14 +57,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -91,7 +91,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {

boards/mbed_lpc1768/include/periph_conf.h

@@ -24,7 +24,7 @@ extern "C" {
 #endif
 
 /**
- * @brief Timer configuration
+ * @name   Timer configuration
  * @{
  */
 #define TIMER_NUMOF         (1U)
@@ -44,7 +44,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (2U)

boards/microbit/include/periph_conf.h

@@ -86,7 +86,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)
@@ -97,7 +97,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   I2C (TWI) configuration
+ * @name   I2C (TWI) configuration
  * @{
  */
 static const i2c_conf_t i2c_config[] = {
@@ -113,7 +113,7 @@ static const i2c_conf_t i2c_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/msb-430/include/periph_conf.h

@@ -36,7 +36,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 #define TIMER_NUMOF         (1U)
@@ -47,7 +47,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)
@@ -68,7 +68,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  * @{
  */
 #define SPI_NUMOF           (1U)

boards/msb-430h/include/periph_conf.h

@@ -38,7 +38,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 #define TIMER_NUMOF         (1U)
@@ -49,7 +49,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)
@@ -70,7 +70,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  * @{
  */
 #define SPI_NUMOF           (1U)

boards/msba2/include/periph_conf.h

@@ -35,7 +35,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration, select a number from 1 to 4
+ * @name   Timer configuration, select a number from 1 to 4
  * @{
  */
 #define TIMER_NUMOF         (1U)
@@ -81,7 +81,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief SPI configuration
+ * @name   SPI configuration
  *
  * The SPI implementation is very much fixed, so we don't need to configure
  * anything besides the mandatory SPI_NUMOF.

boards/msbiot/include/periph_conf.h

@@ -49,7 +49,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -111,7 +111,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  *
  * We need to define the following fields:
  * PIN, DAC channel
@@ -126,7 +126,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -187,7 +187,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/nrf51dongle/include/periph_conf.h

@@ -81,7 +81,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/nrf52dk/include/periph_conf.h

@@ -39,7 +39,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -66,7 +66,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 #define UART_NUMOF          (1U)

boards/nrf6310/include/periph_conf.h

@@ -119,7 +119,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/nucleo-f030/include/periph_conf.h

@@ -44,7 +44,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -79,7 +79,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -142,7 +142,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_CONFIG {            \
@@ -158,7 +158,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f070/include/periph_conf.h

@@ -44,7 +44,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -80,7 +80,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -154,7 +154,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_CONFIG {            \
@@ -170,7 +170,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f072/include/periph_conf.h

@@ -43,7 +43,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -78,7 +78,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -162,7 +162,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
@@ -202,7 +202,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_CONFIG {            \
@@ -218,7 +218,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f091/include/periph_conf.h

@@ -42,7 +42,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -61,7 +61,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -106,7 +106,7 @@ static const uart_conf_t uart_config[] = {
 
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
@@ -189,7 +189,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_CONFIG {            \
@@ -204,7 +204,7 @@ static const pwm_conf_t pwm_config[] = {
 #define ADC_NUMOF           (6)
 /** @} */
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f103/include/periph_conf.h

@@ -53,14 +53,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -87,7 +87,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -160,7 +160,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/nucleo-f207/include/periph_conf.h

@@ -71,7 +71,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -106,7 +106,7 @@ static const timer_conf_t timer_config[] = {
 #define TIMER_NUMOF         (sizeof(timer_config) / sizeof(timer_config[0]))
 /** @} */
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -167,7 +167,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
@@ -247,7 +247,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * We need to define the following fields:
  * PIN, device (ADCx), channel
@@ -262,7 +262,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f303/include/periph_conf.h

@@ -48,14 +48,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -74,7 +74,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -138,7 +138,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/nucleo-f334/include/periph_conf.h

@@ -47,21 +47,21 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -80,7 +80,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -122,7 +122,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/nucleo-f401/include/periph_conf.h

@@ -49,7 +49,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -68,7 +68,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -141,7 +141,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
@@ -210,14 +210,14 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_NUMOF          (0)
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-f446/include/periph_conf.h

@@ -49,7 +49,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -68,7 +68,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -167,7 +167,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
@@ -236,14 +236,14 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_NUMOF          (0)
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo-l1/include/periph_conf.h

@@ -50,14 +50,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -83,7 +83,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -105,7 +105,7 @@ static const uart_conf_t uart_config[] = {
 /** @} */
 
 /**
- * @brief   SPI configuration
+ * @name   SPI configuration
  *
  * @note    The spi_divtable is auto-generated from
  *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`

boards/nucleo32-f042/include/periph_conf.h

@@ -42,7 +42,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -61,7 +61,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -146,7 +146,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_CONFIG {            \
@@ -161,7 +161,7 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/nucleo32-f303/include/periph_conf.h

@@ -46,7 +46,7 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -65,7 +65,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {
@@ -135,14 +135,14 @@ static const pwm_conf_t pwm_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  * @{
  */
 #define ADC_NUMOF (0)
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)

boards/opencm9-04/include/periph_conf.h

@@ -57,14 +57,14 @@ extern "C" {
 /** @} */
 
 /**
- * @brief   DAC configuration
+ * @name   DAC configuration
  * @{
  */
 #define DAC_NUMOF           (0)
 /** @} */
 
 /**
- * @brief   Timer configuration
+ * @name   Timer configuration
  * @{
  */
 static const timer_conf_t timer_config[] = {
@@ -91,7 +91,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief UART configuration
+ * @name   UART configuration
  * @{
  */
 static const uart_conf_t uart_config[] = {

boards/pca10000/include/periph_conf.h

@@ -83,7 +83,7 @@ static const timer_conf_t timer_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/pca10005/include/periph_conf.h

@@ -102,7 +102,7 @@ static const spi_conf_t spi_config[] = {
 /** @} */
 
 /**
- * @brief   ADC configuration
+ * @name   ADC configuration
  *
  * The configuration consists simply of a list of channels that should be used
  * @{

boards/seeeduino_arch-pro/include/periph_conf.h

@@ -25,7 +25,7 @@ extern "C" {
 #endif
 
 /**
- * @brief Timer configuration