||5 years ago|
|Makefile||5 years ago|
|README.md||6 years ago|
|main.c||6 years ago|
This is a manual test application for testing the Xbee S1 network device driver.
For running this test, you need to connect the following pins of a Xbee S1 module to your board:
- UART RX
- UART TX
- VCC (3V3)
NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine UART_STDIO_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.
For testing the Xbee driver you can use the netif shell commands that are included in this application.