You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
44 lines
1.2 KiB
44 lines
1.2 KiB
APPLICATION = driver_encx24j600 |
|
include ../Makefile.tests_common |
|
|
|
FEATURES_REQUIRED = periph_spi periph_gpio |
|
|
|
BOARD_INSUFFICIENT_MEMORY := msb-430 msb-430h nucleo32-f031 nucleo32-f042 \ |
|
nucleo32-l031 nucleo-l053 stm32f0discovery telosb \ |
|
weio z1 |
|
|
|
USEMODULE += gnrc_netdev |
|
USEMODULE += gnrc_netdev_default |
|
USEMODULE += auto_init_gnrc_netif |
|
USEMODULE += encx24j600 |
|
USEMODULE += gnrc_ipv6_router_default |
|
USEMODULE += gnrc_icmpv6_echo |
|
USEMODULE += shell |
|
USEMODULE += shell_commands |
|
USEMODULE += ps |
|
|
|
# lower pktbuf size |
|
CFLAGS += -DGNRC_PKTBUF_SIZE=2048 |
|
|
|
# set board specific peripheral configurations |
|
ifneq (,$(filter nucleo-f334,$(BOARD))) |
|
# these settings are probably valid for PoEll-i on most nucelo boards, but |
|
# tested only on nucleo-f334 |
|
ENC_SPI ?= SPI_DEV\(0\) |
|
ENC_CS ?= GPIO_PIN\(PORT_C,10\) |
|
ENC_INT ?= GPIO_PIN\(PORT_D,2\) |
|
endif |
|
|
|
# fallback: set SPI bus and pins to default values |
|
ENC_SPI ?= SPI_DEV\(0\) |
|
ENC_CS ?= GPIO_PIN\(0,0\) |
|
ENC_INT ?= GPIO_PIN\(0,1\) |
|
# export SPI and pins |
|
CFLAGS += -DENCX24J600_SPI=$(ENC_SPI) |
|
CFLAGS += -DENCX24J600_CS=$(ENC_CS) |
|
CFLAGS += -DENCX24J600_INT=$(ENC_INT) |
|
|
|
# make sure we read the local encx24j600 params file |
|
CFLAGS += -I$(CURDIR) |
|
|
|
include $(RIOTBASE)/Makefile.include
|
|
|