You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Martine Lenders 29842bb5e4 netdev2: rename to netdev and remove `gnrc_netdev` 6 years ago
Makefile netdev2: rename to netdev and remove `gnrc_netdev` 6 years ago sys/uart_stdio: rename STDIO -> UART_STDIO_DEV, move to header 7 years ago
main.c gnrc: use new netreg helper functions everywhere 6 years ago


This is a manual test application for testing the Xbee S1 network device driver.

For running this test, you need to connect the following pins of a Xbee S1 module to your board:

  • VCC (3V3)
  • GND

NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine UART_STDIO_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.


For testing the Xbee driver you can use the netif shell commands that are included in this application.