You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Cenk Gündoğan 58cb5a2738 examples: gnrc_networking: vtimer to xtimer 7 years ago
..
Makefile make: Blacklisted the board 'weio' for some test due to insufficient 7 years ago
README.md examples: rename ng_networking to gnrc_networking 7 years ago
main.c examples: spending the main thread a message queue 7 years ago
udp.c examples: gnrc_networking: vtimer to xtimer 7 years ago

README.md

gnrc_networking example

Connecting RIOT native and the Linux host

Note: RIOT does not support IPv4, so you need to stick to IPv6 anytime. To establish a connection between RIOT and the Linux host, you will need netcat (with IPv6 support). Ubuntu 14.04 comes with netcat IPv6 support pre-installed. On Debian it's available in the package netcat-openbsd. Be aware that many programs require you to add an option such as -6 to tell them to use IPv6, otherwise they will fail. If you're using a Raspberry Pi, run sudo modprobe ipv6 before trying this example, because raspbian does not load the IPv6 module automatically. On some systems (openSUSE for example), the firewall may interfere, and prevent some packets to arrive at the application (they will however show up in Wireshark, which can be confusing). So be sure to adjust your firewall rules, or turn it off (who needs security anyway).

First, create a tap interface (to which RIOT will connect) and a bridge (to which Linux will connect):

sudo ip tuntap add tap0 mode tap user ${USER}
sudo ip link set tap0 up

Now you can start the gnrc_networking example by invoking make term. This should automatically connect to the tap0 interface. If this doesn't work for some reason, run make without any arguments, and then run the binary manually like so (assuming you are in the examples/gnrc_networking directory):

To verify that there is connectivity between RIOT and Linux, go to the RIOT console and run ifconfig:

> ifconfig
Iface  7   HWaddr: ce:f5:e1:c5:f7:5a
inet6 addr: ff02::1/128  scope: local [multicast]
inet6 addr: fe80::ccf5:e1ff:fec5:f75a/64  scope: local
inet6 addr: ff02::1:ffc5:f75a/128  scope: local [multicast]

Copy the link-local address of the RIOT node (prefixed with fe80) and try to ping it from the Linux node:

ping6 fe80::ccf5:e1ff:fec5:f75a%tap0

Note that the interface on which to send the ping needs to be appended to the IPv6 address, %tap0 in the above example. When talking to the RIOT node, you always want to send to/receive from the tap0 interface.

If the pings succeed you can go on to send UDP packets. To do that, first start a UDP server on the RIOT node:

> udp server start 8808
Success: started UDP server on port 8808

Now, on the Linux host, you can run netcat to connect with RIOT's UDP server:

nc -6uv fe80::ccf5:e1ff:fec5:f75a%tap0 8808

The -6 option is necessary to tell netcat to use IPv6 only, the -u option tells it to use UDP only, and the -v option makes it give more verbose output (this one is optional).

You should now see that UDP messages are received on the RIOT side. Opening a UDP server on the Linux side is also possible. Do do that, write down the IP address of the host (run on Linux):

ifconfig tap0
tap0     Link encap:Ethernet  HWaddr ce:f5:e1:c5:f7:59
        inet6 addr: fe80::4049:5fff:fe17:b3ae/64 Scope:Link
        UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
        RX packets:6 errors:0 dropped:0 overruns:0 frame:0
        TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 txqueuelen:0
        RX bytes:488 (488.0 B)  TX bytes:3517 (3.5 KB)

Then open a UDP server on Linux (the -l option makes netcat listen for incoming connections):

nc -6ul 8808

Now, on the RIOT side, send a UDP packet using:

udp send fe80::4049:5fff:fe17:b3ae 8808 testmessage

You should see testmessage appear in netcat. Instead of using netcat, you can of course write your own software, but you may have to bind the socket to a specific interface (tap0 in this case). For an example that shows how to do so, see here.