You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
47 lines
1.6 KiB
47 lines
1.6 KiB
# define the cpu used by the phyWAVE-KW22 board |
|
export CPU = kw2xd |
|
export CPU_MODEL = kw21d256 |
|
#export CPU_MODEL = kw21d512 |
|
#export CPU_MODEL = kw22d512 |
|
|
|
export MCPU = cortex-m4 |
|
|
|
# set default port depending on operating system |
|
PORT_LINUX ?= /dev/ttyACM0 |
|
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbmodem*))) |
|
|
|
.PHONY: flash |
|
flash: $(RIOTCPU)/kinetis_common/dist/wdog-disable.bin |
|
|
|
# Reset the default goal. |
|
.DEFAULT_GOAL := |
|
|
|
export TUI = 1 |
|
export FFLAGS = flash-elf |
|
# We need special handling of the watchdog if we want to speed up the flash |
|
# verification by using the MCU to compute the image checksum after flashing. |
|
# wdog-disable.bin is a precompiled binary which will disable the watchdog and |
|
# return control to the debugger (OpenOCD) |
|
export OPENOCD_PRE_VERIFY_CMDS += \ |
|
-c 'load_image $(RIOTCPU)/kinetis_common/dist/wdog-disable.bin 0x20000000 bin' \ |
|
-c 'resume 0x20000000' |
|
export OPENOCD_EXTRA_INIT |
|
export PRE_FLASH_CHECK_SCRIPT = $(RIOTCPU)/kinetis_common/dist/check-fcfield-elf.sh |
|
|
|
# Add board selector (USB serial) to OpenOCD options if specified. |
|
# Use /dist/tools/usb-serial/list-ttys.sh to find out serial number. |
|
# Usage: SERIAL="0200..." BOARD="pba-d-01-kw2x" make flash |
|
ifneq (,$(SERIAL)) |
|
export OPENOCD_EXTRA_INIT += "-c cmsis_dap_serial $(SERIAL)" |
|
SERIAL_TTY = $(firstword $(shell $(RIOTBASE)/dist/tools/usb-serial/find-tty.sh $(SERIAL))) |
|
ifeq (,$(SERIAL_TTY)) |
|
$(error Did not find a device with serial $(SERIAL)) |
|
endif |
|
PORT_LINUX := $(SERIAL_TTY) |
|
endif |
|
|
|
# setup serial terminal |
|
include $(RIOTMAKE)/tools/serial.inc.mk |
|
|
|
# this board uses openocd |
|
include $(RIOTMAKE)/tools/openocd.inc.mk
|
|
|