You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

66 lines
2.1 KiB

# name of your application
APPLICATION = microcoap_server
# If no BOARD is found in the environment, use this default:
BOARD ?= native
# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/../..
BOARD_INSUFFICIENT_MEMORY := chronos msb-430 msb-430h nucleo-f030 nucleo32-f042 \
pca10000 pca10005 stm32f0discovery telosb weio z1
# Include packages that pull up and auto-init the link layer.
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
USEMODULE += gnrc_netdev_default
USEMODULE += auto_init_gnrc_netif
# Specify the mandatory networking modules for IPv6 and UDP
USEMODULE += gnrc_ipv6_default
USEMODULE += gnrc_udp
# Additional networking modules that can be dropped if not needed
USEMODULE += gnrc_icmpv6_echo
#
USEMODULE += gnrc_sock_udp
USEPKG += microcoap
CFLAGS += -DMICROCOAP_DEBUG
# include this for printing IP addresses
USEMODULE += shell_commands
# Comment this out to disable code in RIOT that does safety checking
# which is not needed in a production environment but helps in the
# development process:
#CFLAGS += -DDEVELHELP
# Use different settings when compiling for one of the following (low-memory)
# boards
LOW_MEMORY_BOARDS := nucleo-f334
ifneq (,$(filter $(BOARD),$(LOW_MEMORY_BOARDS)))
$(info Using low-memory configuration for microcoap_server.)
## low-memory tuning values
# lower pktbuf buffer size
CFLAGS += -DGNRC_PKTBUF_SIZE=1000
USEMODULE += prng_minstd
endif
# Change this to 0 show compiler invocation lines by default:
QUIET ?= 1
include $(RIOTBASE)/Makefile.include
# Set a custom channel if needed
ifneq (,$(filter cc110x,$(USEMODULE))) # radio is cc110x sub-GHz
DEFAULT_CHANNEL ?= 0
CFLAGS += -DCC110X_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
else
ifneq (,$(filter at86rf212b,$(USEMODULE))) # radio is IEEE 802.15.4 sub-GHz
DEFAULT_CHANNEL ?= 5
CFLAGS += -DIEEE802154_DEFAULT_SUBGHZ_CHANNEL=$(DEFAULT_CHANNEL)
else # radio is IEEE 802.15.4 2.4 GHz
DEFAULT_CHANNEL ?= 26
CFLAGS += -DIEEE802154_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
endif
endif