You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
76 lines
2.7 KiB
76 lines
2.7 KiB
# name of your application |
|
APPLICATION = dtls_echo |
|
|
|
# If no BOARD is found in the environment, use this default: |
|
BOARD ?= native |
|
|
|
# This has to be the absolute path to the RIOT base directory: |
|
RIOTBASE ?= $(CURDIR)/../.. |
|
|
|
# TinyDTLS only has support for 32-bit architectures ATM |
|
BOARD_BLACKLIST := arduino-duemilanove arduino-mega2560 arduino-uno chronos \ |
|
msb-430 msb-430h telosb waspmote-pro wsn430-v1_3b wsn430-v1_4 \ |
|
z1 \ |
|
nrf52dk # see #6022 |
|
|
|
BOARD_INSUFFICIENT_MEMORY := airfy-beacon calliope-mini cc2650stk maple-mini \ |
|
microbit nrf51dongle nrf6310 nucleo32-f031 \ |
|
nucleo32-f042 nucleo32-f303 nucleo32-l031 nucleo-f030 \ |
|
nucleo-f070 nucleo-f072 nucleo-f103 nucleo-f302 nucleo-f334 \ |
|
nucleo-l053 nucleo-l073 opencm904 pca10000 pca10005 \ |
|
spark-core stm32f0discovery weio yunjia-nrf51822 |
|
|
|
# Include packages that pull up and auto-init the link layer. |
|
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present |
|
USEMODULE += gnrc_netdev_default |
|
USEMODULE += auto_init_gnrc_netif |
|
# Specify the mandatory networking modules for IPv6 and sUDP |
|
USEMODULE += gnrc_ipv6_router_default |
|
USEMODULE += gnrc_udp |
|
# Add a routing protocol |
|
USEMODULE += gnrc_rpl |
|
# This application dumps received packets to STDIO using the pktdump module |
|
USEMODULE += gnrc_pktdump |
|
# Additional networking modules that can be dropped if not needed |
|
USEMODULE += gnrc_icmpv6_echo |
|
# Add also the shell, some shell commands |
|
USEMODULE += shell |
|
USEMODULE += shell_commands |
|
USEMODULE += ps |
|
|
|
#TinyDTLs (crypto.c) made use of pthread |
|
ifneq ($(BOARD),native) |
|
USEMODULE += pthread |
|
endif |
|
|
|
# Comment this out to disable code in RIOT that does safety checking |
|
# which is not needed in a production environment but helps in the |
|
# development process: |
|
CFLAGS += -DDEVELHELP |
|
|
|
# NOTE: Add the package for TinyDTLS |
|
USEPKG += tinydtls |
|
|
|
# NOTE: Those are taken from TinyDTLS. As the original Makefiles are |
|
# overwitten is a good idea to preserve them here. |
|
CFLAGS += -DDTLSv12 -DWITH_SHA256 |
|
|
|
# NOTE: This adds support for TLS_PSK_WITH_AES_128_CCM_8 |
|
CFLAGS += -DDTLS_PSK |
|
|
|
# NOTE: This adds support for TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 |
|
CFLAGS += -DDTLS_ECC |
|
|
|
# NOTE: If enabled TinyDTLS' log are disabled (if memory is a issue). |
|
# WARNING: Sometimes the log leads to Stack pointer corrupted. |
|
# The reason is not identified yet. |
|
# If said issue appears, enable this line. |
|
#CFLAGS += -DNDEBUG |
|
|
|
# NOTE: The configuration for socket or non-socket communication in TinyDTLS. |
|
CFLAGS += -DWITH_RIOT_GNRC |
|
|
|
# Change this to 0 show compiler invocation lines by default: |
|
QUIET ?= 1 |
|
|
|
include $(RIOTBASE)/Makefile.include
|
|
|