You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

140 lines
3.0 KiB

/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_yunjia-nrf51822
* @{
*
* @file
* @brief Peripheral MCU configuration for the Yunjia NRF51822 board
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock configuration
*
* @note The radio will not work with the internal RC oscillator!
*
* @{
*/
#define CLOCK_CORECLOCK (16000000U) /* fixed for all nRF51822 */
#define CLOCK_HFCLK (16U) /* set to 0: internal RC oscillator
16: 16MHz crystal
32: 32MHz crystal */
#define CLOCK_LFCLK (0) /* set to 0: internal RC oscillator
* 1: 32.768 kHz crystal
* 2: derived from HFCLK */
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
/* dev, channels, width */
{ NRF_TIMER0, 3, TIMER_BITMODE_BITMODE_24Bit, TIMER0_IRQn }
};
#define TIMER_0_ISR isr_timer0
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
#define UART_NUMOF (1U)
/* UART pin configuration */
#define UART_PIN_RX 1
#define UART_PIN_TX 2
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_DEV (1) /* NRF_RTC1 */
#define RTT_MAX_VALUE (0x00ffffff)
#define RTT_FREQUENCY (1024)
/** @} */
/**
* @name SPI configuration
* @{
*/
static const spi_conf_t spi_config[] = {
{
.dev = NRF_SPI0,
.sclk = 19,
.mosi = 17,
.miso = 18
},
{
.dev = NRF_SPI1,
.sclk = 22,
.mosi = 20,
.miso = 21
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
/**
* @name I2C (TWI) configuration
* @{
*/
static const i2c_conf_t i2c_config[] = {
{
.dev = NRF_TWI0,
.pin_scl = 23,
.pin_sda = 24,
.ppi = 0
}
};
#define I2C_NUMOF (sizeof(i2c_config) / sizeof(i2c_config[0]))
/** @} */
/**
* @name ADC configuration
*
* The configuration consists simply of a list of channels that should be used
* @{
*/
#define ADC_CONFIG {4, 5, 6, 7}
#define ADC_NUMOF (4)
/** @} */
/**
* @name Radio device configuration
*
* The radio is not guarded by a NUMOF define, as the radio is selected by its
* own module in the build system.
* @{
*/
#define RADIO_IRQ_PRIO 1
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */