Fix links

src/ds3232.rs

@@ -32,7 +32,7 @@ where
     /// Enable the 32kHz output when battery-powered. (enabled per default)
     ///
     /// Additionally, the 32kHz output needs to be enabled. See
-    /// [`enable_32khz_output`](#method.enable_32khz_output).
+    /// [`enable_32khz_output()`](#method.enable_32khz_output).
     ///
     /// Note: This is only available for DS3232 and DS3234 devices.
     pub fn enable_32khz_output_on_battery(&mut self) -> Result<(), Error<E>> {
@@ -43,7 +43,7 @@ where
     /// Disable the 32kHz output when battery-powered.
     ///
     /// The 32kHz output will still generate a wave when not battery-powered if
-    /// it enabled. See [`enable_32khz_output`](#method.enable_32khz_output).
+    /// it enabled. See [`enable_32khz_output()`](#method.enable_32khz_output).
     ///
     /// Note: This is only available for DS3232 and DS3234 devices.
     pub fn disable_32khz_output_on_battery(&mut self) -> Result<(), Error<E>> {

src/ds3234.rs

@@ -33,7 +33,7 @@ where
     /// Enable the 32kHz output when battery-powered. (enabled per default)
     ///
     /// Additionally, the 32kHz output needs to be enabled. See
-    /// [`enable_32khz_output`](#method.enable_32khz_output).
+    /// [`enable_32khz_output()`](#method.enable_32khz_output).
     ///
     /// Note: This is only available for DS3232 and DS3234 devices.
     pub fn enable_32khz_output_on_battery(&mut self) -> Result<(), Error<E>> {
@@ -44,7 +44,7 @@ where
     /// Disable the 32kHz output when battery-powered.
     ///
     /// The 32kHz output will still generate a wave when not battery-powered if
-    /// it enabled. See [`enable_32khz_output`](#method.enable_32khz_output).
+    /// it enabled. See [`enable_32khz_output()`](#method.enable_32khz_output).
     ///
     /// Note: This is only available for DS3232 and DS3234 devices.
     pub fn disable_32khz_output_on_battery(&mut self) -> Result<(), Error<E>> {

src/ds323x/status.rs

@@ -26,7 +26,7 @@ where
     /// This allows a better assessment of the validity of the timekeeping data.
     ///
     /// Once this is true, it will stay as such until cleared with
-    /// [`clear_has_been_stopped_flag`](#method.clear_has_been_stopped_flag)
+    /// [`clear_has_been_stopped_flag()`](#method.clear_has_been_stopped_flag)
     pub fn has_been_stopped(&mut self) -> Result<bool, Error<E>> {
         let status = self.iface.read_register(Register::STATUS)?;
         Ok((status & BitFlags::OSC_STOP) != 0)

src/lib.rs

@@ -31,12 +31,12 @@
 //! [`clear_has_been_stopped_flag`]: struct.Ds323x.html#method.clear_has_been_stopped_flag
 //! [`set_aging_offset`]: struct.Ds323x.html#method.set_aging_offset
 //! [`enable_32khz_output`]: struct.Ds323x.html#method.enable_32khz_output
-//! [`use_int_sqw_output_as_interrupt`]: Struct.Ds323x.html#method.use_int_sqw_output_as_interrupt
-//! [`enable_square_wave`]: Struct.Ds323x.html#method.enable_square_wave
-//! [`set_square_wave_frequency`]: Struct.Ds323x.html#method.set_square_wave_frequency
-//! [`enable_32khz_output_on_battery`]: Struct.Ds323x.html#method.enable_32khz_output_on_battery
-//! [`set_temperature_conversion_rate`]: Struct.Ds323x.html#method.set_temperature_conversion_rate
-//! [`enable_temperature_conversions_on_battery`]: Struct.Ds323x.html#method.enable_temperature_conversions_on_battery
+//! [`use_int_sqw_output_as_interrupt`]: struct.Ds323x.html#method.use_int_sqw_output_as_interrupt
+//! [`enable_square_wave`]: struct.Ds323x.html#method.enable_square_wave
+//! [`set_square_wave_frequency`]: struct.Ds323x.html#method.set_square_wave_frequency
+//! [`enable_32khz_output_on_battery`]: struct.Ds323x.html#method.enable_32khz_output_on_battery
+//! [`set_temperature_conversion_rate`]: struct.Ds323x.html#method.set_temperature_conversion_rate
+//! [`enable_temperature_conversions_on_battery`]: struct.Ds323x.html#method.enable_temperature_conversions_on_battery
 //!
 //! ## The devices
 //!