245a0e682e
Refine the parameters for having nive arcs
...
Set the $fn some some hage value (maybe a bit overkill) so the facets
are less visible and hopefully the gears smoother.
4 years ago
c3e558a96b
Change motor shaft diameter
...
Looks like printing with good printer makes this hole too large.
The captive nut then pushes the shaft when thightened unevenly,
ending up with the gear not turning around the shaft correctly.
4 years ago
bd7f211cbe
Add missing slide parts from JJrobots
...
Original file can be found here : https://www.thingiverse.com/thing:974906/files
Licensed CC-A
Add brief for files pulled from other projects.
4 years ago
905b7a8075
Flip gears
...
My threaded rod was mounted in the other side, so if I want the gears
to turn in the correct direction, I have to flip them :)
4 years ago
8c2a0d5b3f
make big gears rim margin larger
...
With a 0 margin, it's not possible to fit the gear because of the
motor screw.
4 years ago
2dbaaa8ada
refresh gears after move away from aluminium plate
...
With the wood board replacing the alumnium plate, I need to have
both gears with the same support.
4 years ago
1f34ae68c9
enl4rge rod holder h0l3
4 years ago
7c5decbfa8
Add rod holder model, replaces the one from jj robots that is not slic3r friendly
...
Original work from Clément Leger : https://github.com/clementleger/3d_parts/blob/master/projector_lifter/adjustable_mount.scad
5 years ago
669a5137bc
add holder for new laser (laser 301)
5 years ago
8435e50af3
add margin for both the plate grip and end stop location.
5 years ago
c9c733893a
update end stop model, still not OK
...
too tight, nothing fits correctly.
5 years ago
68ba92e009
initial end stop holder. WIP
5 years ago
Marc
2e69ab12cb
box: switch and button holes
6 years ago
Marc
4793942e70
box: add mounting slot
6 years ago
bd59e00608
remove old file for box
6 years ago
400d337abe
fine tune laser holder
...
now, radius may be a bit too large, but at least, the print does not
brake when fiting laser in place.
6 years ago
Marc
b9ff89d516
fine tune nut holes in laser holder
6 years ago
2d962eaa16
laser holder nearly ready
6 years ago
ca1e234124
add initial box model
...
Based on Ultimate Box Maker
https://www.thingiverse.com/thing:1264391
6 years ago
091a63331c
model for Dolica tripod quick release mount.
...
prepare for 4 M3 screws/hexnuts.
6 years ago
0bf80630ca
add box model (from the Ultimate Box Maker)
...
http://heartygfx.blogspot.com
OpenScad Parametric Box
CC BY-NC 3.0 License
6 years ago
018f4764cf
Add 3D model for stepper cover
6 years ago
10050c20d0
Laser holder work
...
Hook size nearly good
6 years ago
Marc
e63735b448
initial work for laster holder
6 years ago
f451d7e2d6
add rod cover model
...
used to cover screws around rod and allow for big gear to turn.
6 years ago
22b14d9475
add nema17 holder plate
6 years ago
4b3b1483e6
enl4rge gear shaft hole
6 years ago
d6deeee317
3D models for gears
6 years ago
Marc Poulhiès
Marc